New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Plastic Air Operated zet vrij D20.5 * L42mm (paar)

Plastic Air Operated zet vrij D20.5 * L42mm (paar)

Discontinued Product

Please continue searching for a similar product.
Gewicht:
155 g
SKU:
OR011-03303
WANT FREE SHIPPING? Click here to find out more!
ABS Plastic Pneumatische zet vrij D3 * L140mm
Licht van gewicht maar toch sterk en groot genoeg voor vliegtuigen tot 140 grootte.
Actuator is een enkelaanzuigend type. Toen onder druk het intrekken zal sluiten, wanneer de druk wordt verloor het intrekken wordt geopend.
Dimensies;
D20.5 * L42mm
W46 * W25 * H37mm



  • Sku OR011-03303
  • Brand -
  • Capaciteit ( mAh ) -
  • Gewicht ( g) 155.00
  • Lengte 125.00
  • Breedte 59.00
  • Hoogte 85.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

is it for the airbus a380 to or not

please anwser

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

is it for the airbus a380 to or not

please anwser

5 stelle se le merita per il prezzo,

ho montato 3 di questi meccanismi in un falcon 120,peso al decollo,7,5 kg,

dopo 5 voli il materiale plastico ha preso gioco,

li raccomando per un peso massimo di 5 kg

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

5 stelle se le merita per il prezzo,

ho montato 3 di questi meccanismi in un falcon 120,peso al decollo,7,5 kg,

dopo 5 voli il materiale plastico ha preso gioco,

li raccomando per un peso massimo di 5 kg

Retract are all from plastic, hard plastic, cylinders have soft moving. But the plastic body are little bit bended on the face mounting to plane.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Retract are all from plastic, hard plastic, cylinders have soft moving. But the plastic body are little bit bended on the face mounting to plane.

Mogut podklinit v srednem polojenii. Nujna sbazka

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mogut podklinit v srednem polojenii. Nujna sbazka

bardzo dobre latam na nich 120 size cmp zero bez problemow

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bardzo dobre latam na nich 120 size cmp zero bez problemow

exelecente construccion, muy robosto. Diametro del cilindro neumatico: 22 mm, largo total: 110 mm. Para pata de tren de aterrizaje de 6 mm.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

exelecente construccion, muy robosto. Diametro del cilindro neumatico: 22 mm, largo total: 110 mm. Para pata de tren de aterrizaje de 6 mm.

voy a comprarlo y a probarlo, luego os cuento.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

voy a comprarlo y a probarlo, luego os cuento.

These units can't be knocked for the money provided you are prepared to spend 15 mins putting them right, hence the four stars. The metal inserts are not drilled right through and the two grub screws that hold the legs on are flush with the limit of the hole. I found the grub screws were trying to grip the very end of the leg. I took out the inserts and drilled them right through so the leg could be pushed in further and a better grip obtained. Also note that the hole in the insert is 6mm but the hole in the blocks is slightly larger, It would have offered greater support if they were identical sized holes. Lastly the thread for the grub screws was not tapped all the way through, so I retapped that while the inserts were out. With this 15mins. work done the units were charged up and hold pressure no problem for several hours....I got bored watching them :)

I'll report back once they have actually been flown, but they def. deserve four stars only short of the 5 for the above reasons.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These units can't be knocked for the money provided you are prepared to spend 15 mins putting them right, hence the four stars. The metal inserts are not drilled right through and the two grub screws that hold the legs on are flush with the limit of the hole. I found the grub screws were trying to grip the very end of the leg. I took out the inserts and drilled them right through so the leg could be pushed in further and a better grip obtained. Also note that the hole in the insert is 6mm but the hole in the blocks is slightly larger, It would have offered greater support if they were identical sized holes. Lastly the thread for the grub screws was not tapped all the way through, so I retapped that while the inserts were out. With this 15mins. work done the units were charged up and hold pressure no problem for several hours....I got bored watching them :)

I'll report back once they have actually been flown, but they def. deserve four stars only short of the 5 for the above reasons.

These units can't be knocked for the money provided you are prepared to spend 15 mins putting them right, hence the four stars. The metal inserts are not drilled right through and the two grub screws that hold the legs on are flush with the limit of the hole. I found the grub screws were trying to grip the very end of the leg. I took out the inserts and drilled them right through so the leg could be pushed in further and a better grip obtained.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These units can't be knocked for the money provided you are prepared to spend 15 mins putting them right, hence the four stars. The metal inserts are not drilled right through and the two grub screws that hold the legs on are flush with the limit of the hole. I found the grub screws were trying to grip the very end of the leg. I took out the inserts and drilled them right through so the leg could be pushed in further and a better grip obtained.

Wow, these are great looking retracts and very affordable for the average modeler. They replaced a set of "Name brand" retracts and fit perfectly even the bolt pattern.....Gary

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Wow, these are great looking retracts and very affordable for the average modeler. They replaced a set of "Name brand" retracts and fit perfectly even the bolt pattern.....Gary

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!