New Items Nieuws Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Vermogen HD Standard Servo 43g / 5,8 kg / .16sec

Vermogen HD Standard Servo 43g / 5,8 kg / .16sec

Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
HD-6001HB
WANT FREE SHIPPING? Click here to find out more!
Model: HD-6001HB
Voltage: 4.8 ~ 6.0V
Snelheid: 0,16 ~ 0.14sec
Koppel: 5.8 ~ 6.7kg / cm
Gewicht: 43 g
Grootte: 40.7x20.5x39.5mm
  • Sku HD-6001HB
  • Brand Power HD
  • Gewicht 85.0000
  • Lengte 60.00
  • Packaging Width 40.00
  • Hoogte 50.00
  • Torque ( kg) ( min . 0,01 kg ) 5.80
  • Snelheid ( Sec / 60deg ) 0.16
  • A ( mm ) 46.00
  • B ( mm ) 41.00
  • C ( mm ) 42.00
  • D ( mm ) 21.00
  • E ( mm ) 56.00
  • F ( mm ) 29.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

GREAT FOR SMALLER MODELS, HAD A FEW GO BAD RUNNING 6V, BUT THEY ARE CHEAP SO ALL IN ALL OK

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

GREAT FOR SMALLER MODELS, HAD A FEW GO BAD RUNNING 6V, BUT THEY ARE CHEAP SO ALL IN ALL OK

Very bad quality.

Was using this servo as throttle servo for my Trex700N DFC with OS105HZR. Failed after 5 flights, locking my throttle at half stick. Had to fly until empty tank. Very scary 6 minutes.

Inspection of the servo showed that BOTH cables from pcb to servo motor had come loose. The wires failed, not the soldering.

Will never buy cheap servos for expensive models again, not even for throttle..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very bad quality.

Was using this servo as throttle servo for my Trex700N DFC with OS105HZR. Failed after 5 flights, locking my throttle at half stick. Had to fly until empty tank. Very scary 6 minutes.

Inspection of the servo showed that BOTH cables from pcb to servo motor had come loose. The wires failed, not the soldering.

Will never buy cheap servos for expensive models again, not even for throttle..

I have used two of these servos in my Victoria Class RC yacht for almost 12 months and had no problems at all. They are a bit weak at 5.8kg/cm for the sail winch but that has only been a problem in strong winds. Other than that they have performed flawlessly.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have used two of these servos in my Victoria Class RC yacht for almost 12 months and had no problems at all. They are a bit weak at 5.8kg/cm for the sail winch but that has only been a problem in strong winds. Other than that they have performed flawlessly.

High quality , a little noisy but i don't mind.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

High quality , a little noisy but i don't mind.

Smooth and strong servo. Special thanks for additional arm with 2 holes - really helps to connect extender or gimbal.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Smooth and strong servo. Special thanks for additional arm with 2 holes - really helps to connect extender or gimbal.

Nice servos use for y650 camera gimbals A plusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusAAA

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice servos use for y650 camera gimbals A plusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusAAA

This is my second order of these very good servos. Delivery time was more than reasonable. Where I need standard analogue servos, this would be my product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is my second order of these very good servos. Delivery time was more than reasonable. Where I need standard analogue servos, this would be my product.

Este servo lo estoy usando en un stick de 1,7 m con motor asp .61, esta en los alerones y elevador, ningn problema pero hago una observacin: consume un poco ms que un servo similar futaba 3003/4 y como instal un pack de LiFe p/rx no hay inconvenientes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Este servo lo estoy usando en un stick de 1,7 m con motor asp .61, esta en los alerones y elevador, ningn problema pero hago una observacin: consume un poco ms que un servo similar futaba 3003/4 y como instal un pack de LiFe p/rx no hay inconvenientes.

Good servo but no parts stocked and company and hobby shops do not respond. I need a set of gears, I would like nylon/plastic but will also accept metal gears. Right now I have a useless servo and seemingly no way to repair it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good servo but no parts stocked and company and hobby shops do not respond. I need a set of gears, I would like nylon/plastic but will also accept metal gears. Right now I have a useless servo and seemingly no way to repair it.

High Quality Servos.
Using them on a 60 size Warbird with 91 Four stroke. The little vibration of the engine does not effects these servos.
I v been using them for 1 year. So far they are good servos.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

High Quality Servos.
Using them on a 60 size Warbird with 91 Four stroke. The little vibration of the engine does not effects these servos.
I v been using them for 1 year. So far they are good servos.

  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking