Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global

Prop & Back-Plate Drill Jigs voor DA100 & 150 \ DLE111 \ 3W50-170 \ TMM53-106

Prop & Back-Plate Drill Jigs voor DA100 & 150 \ DLE111 \ 3W50-170 \ T...

QTY:

Now save bewaar € 0,00 € 0,00

€ 12,24
Stock:
Gewicht:
253 g
SKU:
DJ-111-100

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Omschrijving
Prop & Back-Plate Drill Jigs voor DA100 & 150 \ DLE111 \ 3W50-170 \ TMM53-106

Zorgt voor rechte boren van propeller en spinner terug platen.
Gekartelde OD die het gemakkelijker maken voor bevestiging verwijderbare maakt.
Kies de juiste maat van de boor voordat u de mal vast te stellen op uw propeller.

5mm boor wordt gebruikt voor het boren propeller van de volgende DA100 & 150 \ DLE111 \ 3W50-170 \ TMM53-106

* Opmerking *: Het is beter om de propeller te boren vanaf de achterkant gezicht. Terug uit boor een paar keer als je gaat om hout te verwijderen van het bit tot een gladde, nauwkeurig gaten te garanderen. Raak de bit niet dwingen door de prop. Plaats de bout in eerste gat na het boren om te helpen met de aanpassing bij het boren van andere gaten. Gelieve steeds oriënteren de prop met een mes tips op 9 en 03:00 of horizontaal aan de grond met de compressieslag voor boor. In het geval van dode stok landingen kan dit uw steun en uw casco op te slaan.
Product
Specifications

Aanvullende Informatie

  • Sku:
    DJ-111-100
  • Brand:
    Nvt
  • Gewicht ( g)
    253.00
  • Lengte
    105.00
  • Breedte:
    27.00
  • Hoogte:
    100.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Zapfen 10mm, Bohrer und Lcher 5mm.

For Centerhole 10mm, drill 5mm.

Perfect little tool to drill propellers like DLE 120 (and the listed in the header)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I cant see how you can do without this if you run the bigger petrol/gas motors
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Much better to use in your prop.For Da 100&150 / DLE111
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
ideal pour per les hlice en bois ou carbonne DLA112
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this is a brilliant tool, cheap and very accurate,,used it today for the first time,ya just cant really go wrong with this as your guide,, have used on CF props,, works fine,, get it soon,, for your next prop you wont be sorry
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Thanks HK for this price and for this product. You must be apply thin oil on it when you not use
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great product, nice an heavy.

It can also be used for MT57 engines. However, the holes in the jig are 5mm and MT uses 4mm, but center of the holes are aligned. I recommend that you drill 5mm holes in the prop and cut pieces of a brass tube (5mm ext/4mm int), and put in the holes. You can also put the tubes in the jig and drill with a 4mm bit, but you will probably destroy the tubes. Use a wooden base for the prop to rest on when drilling.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great product, nice an heavy.

It can also be used for MT57 engines. However, the holes in the jig is 5mm and MT uses 4mm, but center of the holes are aligned. I recommend that you drill 5mm holes in the prop and cut pieces of a brass tube (5mm ext/4mm int), and put in the holes. You can also put the tubes in the jig and drill with a 4mm bit, but you will probably destroy the tubes.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excelente ferramenta para furao de helice para quem tem motores a gasolina de grande cilindrada, bom acabamento.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This has worked great for me! I'd recommend it. Good stuff.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.