Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

Q450 Glasvezel Quadcopter Frame 450mm - Geïntegreerde PCB Version

Q450 Glasvezel Quadcopter Frame 450mm - Geïntegreerde PCB Version

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
395 g
SKU:
297000029-0

Combine

essential items and
esc
battery
motor
acc
Product
Omschrijving

De Q450 is een goed doordacht 450mm quad kader opgebouwd uit hoogwaardige materialen. De belangrijkste kader is glasvezel, terwijl de armen zijn gemaakt van ultra duurzaam polyamide nylon.

Deze versie van de Q450 heeft geïntegreerde PCB aansluitingen voor directe solderen van uw SER. Dit elimineert de noodzaak voor een stroomverdeling board of rommelig multi-connectors het houden van uw elektronica layout erg netjes.

Assembly is een eitje met pre-threaded koperen hulzen voor al het frame bouten, dus geen lock-noten worden vereist. Het maakt gebruik van een maat van de bout voor de gehele bouw, waardoor de hardware zeer gemakkelijk in orde en alleen nodig een maat van inbussleutel te assembleren te houden.

Een goede eigenschap van dit frame is het grote bevestigingslipjes aan de voor- en achterzijde van het hoofdgestel bodemplaat voor montage camera's of andere accessoires. Dit zorgt voor een geweldige manier om vanuit de lucht video te nemen of vliegen FPV zonder de noodzaak om extra montagebeugels toe te voegen.

De Q450 beschikt ook gekleurde armen (2 witte en 2 rode), die geweldig voor oriëntatie. Het helpt om u de juiste richting vliegen zonder dat verschillende gekleurde props.

Wij bieden een volledige lijn van multi-rotor elektronica, zoals multi-rotor control board, ESC en motoren. Het is nog nooit zo makkelijk en betaalbaar om een ​​quad te krijgen in de lucht geweest!

Kenmerken:
Gebouwd van kwaliteit glasvezel en polyamide nylon.
Geïntegreerde PCB aansluitingen voor directe solderen van uw SER
Pre-threaded koperen hulzen voor al het frame bouten.
Gekleurde wapens ter oriëntatie om u te vliegen in de goede richting.
Grote montagelipjes op hoofdframe bodemplaat voor eenvoudige camera monteren.
Eenvoudige montage.

specs:
Breedte: 450mm
Lengte: 55mm
Gewicht: 280g (w / out elektronica)
Motor Mount Bolt Holes: 16 / 19mm

Vereiste:
4 x 28mm 1000 ~ 1200kv (of vergelijkbare grootte / kv)
4 x 15 ~ 25 Amp ESC
4 x 8x4 ~ 10x4.5 Prop (2CW & 2CCW)
1 x HobbyKing Multi-Rotor Control Board
1 x 1500 ~ 2200mAh 3s 11.1V LiPoly batterij

Product
Specifications

Aanvullende Informatie

  • Sku:
    297000029-0
  • Brand:
    Nvt
  • Capaciteit ( mAh )
    Nee
  • Gewicht ( g)
    395.00
  • Lengte:
    270.00
  • Breedte:
    40.00
  • Hoogte
    160.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
had mine for a while and only got round to flying it recently and the first rough landing broke an arm, got a replacement DJI for 4, they are much thicker and better quality plastic. Flew it again and about 1 feet up and the motor cut out landed on one arm quite gently and broke another. The PCB is useful but put a tiny bit if heat on it and the connection fell off. In my opinion i would nit buy this if you want one get the DJI f450 frame, it has better arms and PCB. and it is only about 25.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Pretty good frame. Arms are not as strong as I thought. Took a pretty soft landing in the grass at the local park and broke an arm. Maybe I just landed on that one arm which caused it to break, but im not sure. Otherwise a pretty well built frame and would definitely order more.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
basic frame, you save money as the frame has a built in distribution board
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought this cheap frame with KK2.1 board, Turnigy ESC Plush 30a, NTM 800kv short shaft, 10*4.5 props. Firstly, the screws that came with the motor acc. were too short to install them on the frame: had to buy ones... Then, the holes don't fit to install the KK2 board. Had to create a board to install it... The screws that come with the frame don't fit very well and can unscrew during flight, I put a little bit of hard glue on them.
Finally, for my second flight, I loose a prop. when the quad was around 5m height (it's because of the poor quality of the fixations that were unscrewd during flight PRODUCT ID: NTM2830S-800 !!!). No spare parts are available on HK. But for the price you can buy another frame if it is in stock.
However, I liked the integrated PCB and the easy way to mount it (if you have all the pieces!). If you want to do FPV, you will not have a lot of space to place everything... A landing skid is a must have on it.
I would not recommend it because of all those negative points. Price is not all that matters.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Two front arms broke off in a very light crash, my 3D printed quad arms are stronger than these. As far as a kit, it was nice to put together, the intergrated PCB is handy, but if it can't survive one small crash, its not worth the build time. Won't be buying another one of these frames.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a very cheap frame, and works well. The problem is that the arms are INCREDIBLY fragile. I have broken 3 already. I bought a spare frame so I had spares but the arms are a terrible design. I added another deck to mine by using a top plate from my second kit. Good for housing all of the FPV equipment within leaving the top deck free for the controller.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Its a great frame, brakes kinda easy but considering the price, its great!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Awesome frame all around, I didnt have any issues with the supplied screws that others reported (maybe the new batch is improved). Everything was straight forward. This was my first quad build and I used this frame with (4) Turnigy D2822/14 1450kv motors, (4) HK Afro 20amp esc's and (4) Gemfly 8045 props and it has tons of power and runs cool. Very happy with everything from HK. A 3s 2200 40c pack gives about 8min flight. Highly recommended, the integrated PCB is a must have, so easy.

Jordan
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good Frame for light quads.
The weight is high but the durability is very good.
Easy to build and rebuild if necessary :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Best quality/price. My first real quadcopter. I bought as spare, because in crash case, the single arms broke in two points.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Combine

essential items and
esc
battery
motor
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.