Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Quanum MT Series 4012 400KV borstelloze multirotor Motor Gebouwd door DYS

Generating Links

Quanum MT Series 4012 400KV borstelloze multirotor Motor Gebouwd door DYS

Prijs:

Now save bespaar € 0,00 € 0,00

€ 26,54
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
573000058-0
Geen verzendkosten? Klik hier meer leren!

Quanum MT-serie motoren zijn Spec gebouwd door DYS, in de industrie bekend om hun kwaliteit en prestaties.

De MT lijn maakt gebruik van hoogwaardige NMB lagers, high pole tellingen voor het koppel en een soepele werking en hebben allemaal universele bevestigingen gestandaardiseerd in hun bepaalde grootte. Quanum heeft de motoren met N42sh magneten en .2mm lamellen voor een optimale efficiency specificatie had. De MT's ook hebben ruime motor draad lengte voor een snee aan de installatie te passen, met de bijgeleverde bullet connectors en krimpen buis. Een andere leuke functie is dat Quanum spec''d alle motoren om te komen met bevestigingsmateriaal in verschillende lengtes, evenals zowel hub en direct mount propeller opties, zodat de installatie is in een handomdraai.

Elke Quanum motor QC gecontroleerd voor het evenwicht, de wind, de prestaties en de mechanische tolerantie. De DYS merk staat bekend om hun BE-serie en de nieuwe spec gebouwde MT lijn zal de nieuwe normen en waarden versus prestaties in te stellen.

Kenmerken:
• High Power N42sh magneten
• Precision NMB lagers
• .2mm lamellen voor een optimale efficiency
• Ruime op lengte gesneden motor draden voor een schone installatie
• Direct mount propeller of Hub stijl compatibele
• Multi-length bevestigingsmateriaal bijgeleverd

specs:
KV (RPM / V): 400KV
Cellen Lipo: 4-6S
Max Power: 350.8W
Max Amps: 15.8A
Nullaststroom: 0,8 / 22.2V
Internal Resistance: 0.41ohm
Aantal polen: 14
Afmetingen (Dia.xL): 47x31mm
Motor As: 4mm
prop schacht: 6mm CW prop adapter
Gewicht: 144g
bout gat afstand: 25x32 M3, M2.5
Lamineren dikte: 0.2mm
Magneten: 42SH
Draad: 18AWG
Connector: 3,5 mm kogel

  • Kv ( tpm / v ) 400.00
  • Max Currents (A ) 16.00
  • Resistance ( mh ) 0.00
  • Max Voltage ( V ) 22.00
  • Vermogen ( W) 350.00
  • Shaft A ( mm ) 4.00
  • Lengte B ( mm ) 31.00
  • Can Diameter C ( mm ) 47.00
  • Kan Lengte D ( mm ) 13.00
  • Totale lengte E ( mm ) 38.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

  • Quanum MT Series
Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Michael | Geverifieerde koper

  • Overall
  • Quality
  • Value

Einfach Top!

Sep 05, 2017

Heute sind meine Motoren und die Regler gekommen. Einfach super schnelle Lieferung. Ich bin total zufrieden.
Die neue Bestellung wird gerade zusammengestellt.
Immer wieder gerne!!

PaulF | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jul 01, 2016

I bought a bunch of the Quanum motors convinced by the ads that they would be great.
That will be the last time I buy more than a single sample of a new product from HK, and test that sample thoroughly before ordering any more.
I only awarded one crown because zero was not an option.
I have seen some pretty stupid things over the years, but this one ranks as among the lowest.
The prop adapter is 5 mm.
The motor shaft is 4 mm, and protrudes from the face of the motor a length equal to the thickness of the base of the prop adapter.
That would be OK, except that the clearance hole for the shaft protrusion is drilled-out to 5 mm for a brass liner with 5 mm OD and 4 mm ID.
The result is that the material left at the base of the prop adapter shaft is paper thin and the shaft breaks off when the nose nut is torqued even just a little bit.
The prop adapters are useless.
Even if a few held together when torqued very gently, I would not dare to fly anything with them for fear the prop would break off in flight.
I also have sets of 4108 motors of 475, 580 and 700 KV, and they are all the same.
In total, 19 motors with no usable prop adapters.
Disappointed, frustrated, angry....

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 01, 2016

motori di ottima qualita e ben costruiti dei veri mostri, un po poca potenza per le sue dimensioni ma questo giustificato dal fatto che a dei consumi molto bassi! consiglio di usarli a 6s con eliche grandi 14-15

Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!