Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Quanum Q-3D borstelloze 3-Axis Camera Gimbal (geschikt voor Nova, Scout X4, Phantom, QR X350 etc.)

Generating Links

Quanum Q-3D borstelloze 3-Axis Camera Gimbal (geschikt voor Nova, Scout X4, Phantom, QR X350 etc.)

Prijs:

Now save bespaar € 112,10 € 112,10

Special Price € 51,34 € 51,34

You save bespaar € 112,10 € 112,10

Was  € 163,44

Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
9198000389-0
Geen verzendkosten? Klik hier meer leren!

De nieuwe Quanum Q-3D is een hoogwaardige, 3-Axis borstelloze camera beugel die is ontworpen voor gebruik met de GoPro held 3 en Quanum FPV + camera's 350 ~ 500 size meerdere rotormodellen (zoals Quanum Nova, Scout X400 , TALI H500, QR X350 PRO en DJI Phantom).

Als het gaat om een ​​grote antenne video platform, een paar dingen zijn essentieel; ontwerp, de grootte, gewicht en prestaties. De Q-3D is een ontwerp dat is geoptimaliseerd vanaf het begin voor een goede integratie, besparing op grootte en het gewicht en de pre-tuned controller presteert net zoals je zou verwachten van Quanum.

De Q-3D is een van de kleinste en lichtste 3-assen borstelloze cardanusringen op de markt. Op slechts 110mm hoog, kan het te wissen meest multi-rotor landing skids en weegt slechts 185g, perfect voor 350 ~ 500 middelgrote multi-rotoren. Zowel de verticale en horizontale hoek kan worden aangepast op het vliegen van een R / C-kanaal en heeft een enorm werkspanning bereik tot 28 volt.

De Q-3D wordt vooraf afgestemd van de fabriek, waarvoor geen setup, gewoon bout op de bodem van de Quanum Nova, Scout X4, QR X350 PRO of DJI Phantom, installeer je GoPro Hero 3 / Quanum FPV + camera en je bent klaar om te schieten professionele gestabiliseerd aerial video!

Kenmerken:
• Lichtgewicht nog duable aluminium constructie
• Compacte grootte
• Aan te passen aan de meeste 350 ~ 500 formaat multi-rotor modellen (direct geschikt voor Nova, Scout X4, TALI H500, QR X350 PRO en DJI Phantom)
• Pitch and roll stuuringangen
• Ondersteuning voor de GoPro Hero 3 video-aux-uitgang
• Enorme ingangsspanning ondersteuning (7,4 ~ 28V)
• Voedingsspanning omgekeerde verbinding bescherming en spanning compensatie
• bescherming Motoraandrijving side kortsluiting
• Initiële hellingshoek
• Gevoeligheid parameters instellen

specs:
Werkspanning: DC 7,4 V ~ 28V (aanbevolen 12V, 3S Li-Po batterij)
Werkende stroom: 500mA ~ 600mA (afhankelijk van de geleverde spanning en motorvermogen)
Werktemperatuur: -15 ° C ~ 65 ° C
Sensor: 3-assige MEMS gyro en 3-assige versnellingsmeter MEMS
Nauwkeurigheid control: 0.02 °
Hoek controle bereik: -135 ° ~ 90 ° (tilt); -45 ° ~ 45 ° (rol)
Toepasselijk camera: iLook / iLook + / GoPro serie / Tunigy ActionCam
Gewicht: 188g (zonder camera)
Afmetingen: 114.3x97.5x106.6mm
Box dimensie: 150x127x98mm

  • Quanum Q-3D 3 Axis Gimbal
Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Ian | Geverifieerde koper

  • Overall
  • Quality
  • Value

Walkera replacement, Great price and quality matched

Mar 31, 2018

Having point blank refused to pay prices being asked for the Walkera G-3D came across this Quanum Q-3D as a straight swap. So far, as I only received it a day ago it's connected and works perfect. Quality appears to match as identical. I did have to use my existing Tali H500 power input/data con ribbon cable which was not supplied with the Quanum. Great service and terrific delivery time. Ordered Monday and arrived via DHL on Thursday.

Alan | Geverifieerde koper

  • Overall
  • Quality
  • Value

I mean, it works...?

Nov 23, 2016

While this thing is cheap, I think it's borderline lying trying to call it a 3 axis gimbal when one of the axis is not controllable from a transmitter. That is a minor annoyance compared to the power this thing pulls versus what the documentation says. The documentation states a power draw a bit over half an amp. I have tested this thing and it pulls twice that during normal operation and with NO vibration of any kind affecting it. I have to get a bigger regulator just to feed this thing while it sits on my quad.

Robert | Geverifieerde koper

  • Overall
  • Quality
  • Value

So so

Nov 01, 2016

Ok given it's just a Walkera G-3D etc you'd think that Hobbyking would A. Release the USB tool and B. The firmware that Walkera did to move roll - yaw. You'd also presume that they'd have bothered to 'check' their product given the 'Passed' Sticker on it right? Nope missnig the counter weight in my box, also noticed that the yaw axis has not been properly calibrated sits 3-8 degree's off axis..

For the price Hobbyking it's a poor effort. You can buy better, more functional gimbals cheaper!

miki | Geverifieerde koper

  • Overall
  • Quality
  • Value

quanum 3d

Nov 01, 2016

no recomiendo este gimbal , antes de comprar mirar otra opcion , es imposible de ajustar . por otra parte ahora esta muuuuyyyyy caro , ojo !!!!

miguel | Geverifieerde koper

  • Overall
  • Quality
  • Value

quanum 3d

Oct 30, 2016


This gimbal is crap, is deprogrammed every time I turn it on, I have to set the gains in each flight, and also now worth $ 316.77 a lot, in the market there are other better and much cheaper. I not recommend it, unless you want to problems do not buy it.

miguel | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Oct 30, 2016


This gimbal is crap, is deprogrammed every time I turn it on, I have to set the gains in each flight, and also now worth $ 316.77 a lot, in the market there are other better and much cheaper. I not recommend it, unless you want to problems do not buy it.

miguel | Geverifieerde koper

  • Overall
  • Quality
  • Value

quanum 3d

Oct 30, 2016


I think they have gone mad, this gimbal is not so good to be worth $ 316.77. In the international market exinten other better and not worth much.

Kris | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Aug 04, 2016

I want to be as honest as possible with this review. Overall, this gimbal was poorly designed from the start and has several issues.

It's designed to work with GoPro's and I have a Hero3. However, due to the placement of the camera, attaching a USB AV cable is difficult to say the least.

You cannot not control yaw via an RC channel, but I was aware of this when I bought it. It's a minor inconvenience for me, but a bigger problem is how if you want to control pitch via an RC channel, you must also use another channel for roll stabilization. You cannot control just pitch as the roll channel floats and then eventually drifts. That is a pain.

Third, if you plan to use a different camera or add a filter, you must change power and gain settings every time you power up. Apparently, my gimbal does not save settings after I set them. Unfortunately, you would hope there was an easy USB connector to adjust settings via your computer, but you must buy a proprietary adaptor to do so. Why do this at all?

Fourth, vibration isolation to prevent camera jello is sub-par. Decent experimentation is needed even on a fully balanced rig.

Overall, I cannot recommend this gimbal despite it's low price. It's finicky and just wasn't properly designed to "make sense".

miguel | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 17, 2016

TENGAN MUCHO CUIDADO CON LA POLITICA DE PRECIOS DE LA MARCA HOBBYKING
HOY TIENEN UN PRECIO Y MAÑANA OTRO , ES INDICNANTE .
TENGAN MUCHO CUIDADO CON ESTOS SEÑORES , PARA MI SON UNOS INCONPETENTES!

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 02, 2016

This product is purchased in order to use the camera for fpv.

There are a lot of expectations.

  1. 1
  2. 2
  3. 3
Klantbestanden
manual Download [2915]
No File Name Download [1783]
No File Name Download [1214]
Wiring for CX20 Download [1783]
Wiring for CX20 Download [1783]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!