Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Race 32 Racing Flight Controller F303 (Deluxe)

Generating Links

Race 32 Racing Flight Controller F303 (Deluxe)

Prijs:

Now save bespaar € 0,00 € 0,00

€ 40,40
Toestand:
Uit voorraad!
SKU:
387000090-0
Geen verzendkosten? Klik hier meer leren!

Als eerste over de finishlijn voor zowel de prestaties en prijs en nu klaar voor jou om de geblokte vlag te nemen! De Race32 Flight Controller is ontwikkeld voor quad racers, waar een licht gewicht volwaardige vlucht controller die u de rand je nodig hebt kan geven.

Volledig compatibel met Cleanflight de Race 32 FC heeft alle belangrijke kenmerken van de nieuwste platen, waaronder de fantastische STM32 F3 processor. Hoe sneller ARM Cortex-M4 kern heeft een floating point hardware unit voor een efficiënte berekeningen vlucht en loop tijden zijn twee keer zo snel als de vorige generatie STM2 F1 boards.

Vol met beschikt over de Race32 is een slimme keuze vlucht controller voor de serieuze quad / multirotor piloot.

Kenmerken:
• Hybride plug setup, JST stekkers en door gaten voor pin connectors. Geen compromis over poorten. Volledige functie ondersteuning van alle modules, allemaal op hetzelfde moment.
• Beschermende hoes
• Stapelbaar design - perfect voor integratie met OSD en macht verdeelkasten
• Black Box Flight logboekrecorder
• De volgende generatie STM32 F3-processor met snellere ARM Cortex-M4 kern met floating point hardware unit.
• Stekkers gelegen aan dezelfde kant van het bord
• 4 PWM 3 pin door gaten aansluitingen voor SER, servo's. Volledige ondersteuning voor Oneshot ESC
• Ondersteunt SBus, SumH, SumD, Spektrum 1024/2048, XBus, PPM, PWM-ontvangers.
• Ingebouwde inverters
• Speciale uitgang voor programmeerbare LEDs
• Accubewaking poort, buzzer-poort
• PWR poorten voor spanning en stroom
• Sonar ondersteuning voor precisie lage hoogte positie te houden
• Barometer gemonteerd aan de onderkant van het bord voor gemakkelijke wind isolatie
• Configuratie van de vlucht controller via een cross-platform GUI (windows / OSX / Linux)
• Ondersteuning voor vaste vleugel, tricopters, quadcopter, hexacopters, octocopters en nog veel meer.

specs:
Afmetingen: 36 x 36mm bord met 30.5mm montagegaten
Gewicht: 5g
CPU: STM32F303 met FPU 256k flash
Gyro: MPU6050
Barometer: MS5611
Magnetometer: HMC5983
Poorten: UART1 / OSD, UART2 / GPS, UART3 / Serial RX, I2C

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

SHELDON | Geverifieerde koper

  • Overall
  • Quality
  • Value

works perfectly

Mar 19, 2022

good product good name difficult, to use at first .solved problems on u-tube and cheap.

robert | Geverifieerde koper

  • Overall
  • Quality
  • Value

Great FC with plugs so no soldering

Feb 11, 2021

Shame this is discontinued, get one if you can, load with inav and put a gps on and its rock solid. You have to remove from the case and short out the jp2 pads, then plug in the usb and run the inav configurator. When flashing the bar changes from blue to red and states 'error'. But disconnect and re plug in to usb and run configurator, all is fine.There is an instruction sheet which shows the board and all its connections. The holybro nano gps was virtually plug and play as was the BN220. The Holybro has an onboard compass so you have to sever the connection on JP1. You can do this by using the edge of a stanley blade. If you use the BN220 gps, that has no compass and was truely plug and play. Obviously configuring it in inav is another thing but plenty of documentation/ videos on the net. I like the plugs, I wish more FC's had them. Pad it well, this board doesnt like much vibration.

Federico | Geverifieerde koper

  • Overall
  • Quality
  • Value

Works Fine

Jul 29, 2020

For updating firmware, I needed to unckeck "No reboot Sequence" and then I was able to flash it. It gives an error when "checking", but at that moment disconnect and reconnect the board and it is already flashed. For installing Betaflight, first update cleanflight to the latest for SPRACINGF3

Joe | Geverifieerde koper

  • Overall
  • Quality
  • Value

Great value

May 17, 2020

Voltage monitoring doesn't work correctly

Agostino | Geverifieerde koper

  • Overall
  • Quality
  • Value

ottimo prodotto

Apr 28, 2020

Un regolatore fantastico e acquistato ad un prezzo ottimo complimenti

Agostino | Geverifieerde koper

  • Overall
  • Quality
  • Value

Prodotto ottimo

Mar 12, 2020

Prodotto eccezionale un fly controller di tutto rispetto a un prezzo fantastico

Benjamin | Geverifieerde koper

  • Overall
  • Quality
  • Value

Never got to work. Definitely not for beginners.

Sep 23, 2019

Seems like more experienced users got it to work but I'm cutting my losses. Expect trial and error using bits of information from random reviews. I'm a beginner and would discourage other beginners from getting this FC.

robert | Geverifieerde koper

  • Overall
  • Quality
  • Value

Good FC but PWM map wrong from factory

Jun 10, 2019

Good board, special thanks to Bruno who worked out the correct PWM mapping. If you are seeing the aux channels moving instead of the AETR channels in cleanflight, remap in CLI mode as follows - map AE34TR12 dont forget to save. Thanks to Bruno who stopped me throwing this FC in the bin.

Dany | Geverifieerde koper

  • Overall
  • Quality
  • Value

deff

Mar 19, 2018

flashen with ????

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 09, 2016

A good one if you have to build with the small white connectors

  1. 1
  2. 2
Klantbestanden
Manual A Download [141]
Manual B Download [158]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!