Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

SpyderByte 190 Lightning X Racedrone (framekit)

Generating Links

SpyderByte 190 Lightning X Racedrone (framekit)

Prijs:

Now save bespaar € 0,00 € 0,00

€ 52,38
Aantal stuks:
Verzonden vanaf:
  • USA
  • Global
Toestand:
Op voorraad
SKU:
9107000434-0
Geen verzendkosten? Klik hier meer leren!

Dit SpyderByte Lightning X-frame is gemaakt voor snelheid. Het wordt geleverd met sterke, machinaal bewerkte 4mm koolstofvezelarmen, dus er is geen flex als je op extreme snelheid bent. Het boven- en onderdek zijn van machinaal bewerkte 2mm koolstofvezel om de quad stijf te houden. Het frame met wielbasis van 190mm heeft een propeller van 4 inch nodig om de drone op snelheid te houden.


Dit frame wordt geleverd met een middelste 2mm koolstofvezeltoren om al je elektronica te bevatten. Zoals vluchtcontroller, PCD, ontvanger, FPV-camera en Video TX die worden beschermd door het frame.


De toren wordt geleverd met een verstelbare FPV-camerabevestiging (geschikt voor FPV-bordcamera's), zodat u de FPV-camera in een hoek kunt verplaatsen die voldoet aan uw vliegvereisten. Als u de kleinere 1177-stijl camera's gebruikt, zoals Foxeer CCD-stijl camera's die een camera-kantelhouder hebben, kan het torenframe worden gewijzigd om deze kleinere camera's te ondersteunen. Het maakt ook het bovenste gedeelte vrij voor een actiecamera die kan worden vastgemaakt.


Een ander uniek kenmerk is de mogelijkheid om uw Video TX-antenne verticaal uit de achterkant van het frame of uit een van beide zijframes te laten komen. Het benedendek heeft ingebouwde sleuven om batterijriemen mogelijk te maken, zodat uw batterij veilig en gezond blijft.


De SpyderByte Lightning X is het frame dat je nodig hebt voor serieus racen.


Kenmerken:
• Sterk en stijf raceframe van 190mm
• 4mm koolstofvezelarmen
• 2mm koolstofvezel dekken
• Instelbare FPV-camerapositie


Specificaties:
Wielbasis: 190mm
Gewicht: 110g (alleen frame)
Afmeting: 165 x 165 x 77mm
Armen: 4mm koolstofvezel
Dekken en framecomponenten: 2mm koolstofvezel


Inbegrepen:
Framekit
Handleiding


Verplicht:
4 x 1806~1808~2204 motoren
4 x 4” propellers (CW/CCW)
4 x 12 ~ 20A ESC's
1 x 3 ~ 4S 1000 ~ 1600mAh LiPo-batterij
1 x vluchtcontroller
1 x VOB
5 ~ 6 kanaals radio en ontvanger
FPV-uitrusting (optioneel)

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Bezerk20 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Looks cool. Designed poorly.

Jan 26, 2017

Great idea, poorly executed. This could be a market leading frame if the manufacturer put in a little more R&D. Let's start out with the problems I encountered with this one. The first thing I noticed was there is no nylon standoffs for the pdb or flight controller. At nearly 50 bucks for the kit this is a huge oversight. You actually need 2 sets as they will stack together. The floating camera mount is all but useless as its cut too small so will not hold the set angle, it's also designed for a board cam only. Hs177 mounting options are a must these days. The so called antenna mount is also no good as there is not enough room between the mounting hole and the pod to allow any respectable antenna to be attached.  This is made worse by not having a path for the pigtail to run back inside the pod to your transmitter. The rear most mounting holes on the pod also do not align with the standoff as the top plate has been designed too long. As a suggestion this frame could do with another 25mm or so wheelbase as it would make the motor/esc install much neater. I really like the way the arms interlock to create a square, this appears tough as nails. Also a battery strap would be nice. Overall a good frame which flies great just took a lot of modification to bring it up to the next level. I would not recommend at this price. It's more like a $30 tops frame considering what you need to do and add yourself to get it in the air.

kevin | Geverifieerde koper

  • Overall
  • Quality
  • Value

STOP!!!!!! dont overlook this frame ! it is truly incredible!

Nov 10, 2016

i've purchased and flown many good frames ,but this one is in the front of the line for good reason. it is versatile w options for your fpv camera and/or hd camera too! it is very ridged and strong ,and has very tight tolerances for 5'' props ...this frame is an awesome value that will scream like no other w 2600kv motors! no other frame will be as durable for what you pay here. i absolutely love this x frame,and after i'm done writing this review, i'm going to buy another ! the only way you could possibly improve this frame is to add another camera plate for hs1177 cameras too, and offer 5mm arms ....then i believe this frame could never be beat! thank you for offering this to the fpv racers hobbyking! :-)

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 08, 2016

Brilliant. Moved my electronics from a ZMR250 to this frame. Can actually fit a 5 inch (only just but there is around 1-3mm of clearance so it isnt too close). Flies a lot better than my ZMR due to the weight reduction as well as the pure x design. Soooo happy with this frame, cant believe more people dont use it. The pod has a little give on mine as I took out the front brace to fit electronics (not necessarily a bad thing as it will take a crash better) and the long screws are just a little too long for the stadoffs (just took a file to the end of two of them and it was all good).

Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!

Accessoires