Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

Red Arrows Hawk 35mm EDF Micro Jet EPO (PNF)

Red Arrows Hawk 35mm EDF Micro Jet EPO (PNF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
720 g
SKU:
T45-35-PNP
Product
Omschrijving

Dit kleine BAE Hawk is geweldig, EPO schuim gecombineerd met zijn vedergewicht statistieken betekent dat het erg vergevingsgezind van de oneven minder dan 100% landing. De 35mm Fan Unit en ESC zijn vooraf geïnstalleerd als de rol- en lift servo's, het model wordt geleverd in 2 stukken, zodat alles wat je hoeft te doen wanneer het aankomt wordt bevestig de verticale stabilisator, het aansluiten van de RC apparatuur om een ​​Receiver die Micro gebruikt molex 3 Pin conectors, zoals de HobbyKing OrangeRX 4-kanaals Micro ontvanger en je bent klaar om te gaan ...... waar waren we? Ah ja, het uitvoeren van die beroemde Red Arrows aerobatics in het plaatselijke park, basketbalveld, in feite vrij goed overal, deze modellen zijn een absolute giller wanneer gevlogen met vrienden, in feite genoeg krijgen van jullie samen en kijk of je een aantal van kunt trekken die adembenemende nauwe vorming routine van de Red Arrows zijn beroemd om!

De doos van het model komt in is echt handig voor niet alleen het transport van het model om te voorkomen dat hanger uitslag, maar het reservewiel zakken in de verpakking schuim zijn ideaal voor het vervoer van reserveonderdelen Lipolys en u zult zo veel plezier hebben met dit, zou ik een paar dragen! Dit Hawk is zo schattig, zelfs je vrouw zal het leuk vinden!

specs:
Wing Span: 363mm
Lengte: 431mm
Flying Gewicht: 95g
Wing Gebied: 2.35dm2
Wing Loading: 40.4g / dm2
EDF: 35mm met 9000kv borstelloze Outrunner Motor
ESC: 6A w / BEC
Servo: 3 x 2g

inclusief:
optioneel Missiles
3 Blade Fan Rotor
instructie Book

vereist:
Uw Eigen 4-kanaals TX / RX (compatibel RX met 1.25mm Molex 3 pins connectors)
7.4v 450mAh 2s LiPoly Battery

Product
Specifications

Aanvullende Informatie

  • Sku:
    T45-35-PNP
  • Brand:
    Nvt
  • Gewicht ( g)
    720.00
  • Lengte
    520.00
  • Breedte:
    110.00
  • Hoogte:
    505.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice looking Hawk but needed a few modifications. I run this on 3S 450 gensace lips and a H-King 10a esc. Very nice power but didn't try it on 2s. The Aileron control horns needed some glue and tightening and the cockpit is missing the pilots (lol). It's fun to fly but needs a big hard throw to get it moving
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very cool micro edf. Hand launching takes a bit of practice but a nice firm toss about 45 degrees gets it up ok. Running stock setup and flys well and straight. Orientation is a bit hard at a distance as it's all red. Max throws for elevator as it is very small and set minimum throws on ailerons as it is very responsive and can be very twitchy at full throttle.
Overall a fun, small and great sounding little edf.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Wow I like this T45. I have the red Bae Hawk version, not the white Gosh Hawk scheme. Mine came out of box lovely but had to do sum surgery to get it sweet. I noticed that one of the aelieron servos didn't have tape on it like the elev and other aelieron servo, on closer inspection it is different so I ashume it should be the elev servo and was put in the wrong spot on assembly line. No matter I swapped the right one into aelieron spot and used a turnigy digital 4g servo for elevator after freeing up the rods and running in the epo hinges, much freeier action. I also made little plastic washers for the control rod links to the horns to take out the freeplay. Shortened all the wires and removed some plugs too, but still with a nano tech 2s 350mah my auw (all up weight) is 120g. It shore makes good thrust testing so maiden shortly, then might go 3s setup and try getting auw down a bit more. Too happy can't wait, I have the twin A10 35mm too, it was heavy but flys excellently like a bigger plane.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very powerfull jet. It's my first one, and I'm in love with it. I fly with my nanotech 300mah or 450 2s lipo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very beautiful jet to fly!!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this little red arrow looks very nice and even has 2 little pilots in it,sadly flight wise it is very under powered on the 2 cell set up and barley has enough thrust to stay airborne,will do rolls but forget loops,also it does not like wind at all and get thrown around but this maybe to do with the lack of power again,3 cell is the only way to go with this if you want it to last
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
ok otimo produto estou no aguardo me recomendaro
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A cute little model. Mine arrived with slightly warped tailplane halves. Easily straightened and strengthened by cutting slots in the underside and inserting some flat carbon strip. Did the same on the wing to prevent flex. Hoping that the extra stiffness will make the model groove better. Fitted a dsm-x 6 CH. Rx and 2s 460 turnigy battery. Had to remove foam in the battery bay to get everything in. Cg was spot on with this set up
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just received my Hawk from UK Warehouse. Please note that it now has NORMAL SIZE type servo plugs and not the Micro Molex type as described above. It also has servo wire extenders, not good in such a small space. The elevator works through snake/wires and the servo does not have enough power to overcome the friction, so I have installed a slightly larger servo. Having got a RX that is compatible with the micro plugs specifically for this model the size of the plugs and extension wires is a major spoiler. The receiver was ordered and included at the same time, no comment from HK, sad really that they make this type of error.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mine also arrived this morning with standard servo connectors. Lovely looking plane. But don't tell the wife coz I'm not supposed to see it till Christmas :). Could someone tell me if there is supposed to be something under the nose of this plane as mine has a small square slot?
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.