Leverancier worden Blog Nieuwe items

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

RGB LED Flexible Strip with 4-pin Driver Connector 1m (Red/Green/Blue)

Generating Links

RGB LED Flexible Strip with 4-pin Driver Connector 1m (Red/Green/Blue)


Now save bespaar € 0,00 € 0,00

€ 2,29
Aantal stuks:
Verzonden vanaf:
  • USA
  • Global
Op voorraad
Geen verzendkosten? Klik hier meer leren!

This LED strip contains 3 RGB (Red,Green, Blue) LEDs in every 50mm section.
The LED strip may be cut to fit into installations if necessary. Cutting marks are printed on the strip and must be adhered to. The smallest workable segment of the single color strip is 50mm long and contains 3 top Surface Mount LEDs.

During soldering, do not exceed a maximum soldering temperature of 260 Celsius degrees and the soldering time of 10 seconds. Solder connection should only be performed on designated solder pads on the strip.

There is a double-sided adhesive tape attached to the back of the strips. Care must be taken to provide a clean and dry mounting surface when mounting the strips.

This strip is not waterproof.

• Supplied with 4 terminal plug for easy connection to RGB LED driver allowing for multiple effects, colors, brightness and speed (sold separately)
• 500mm long strip of RGB LEDs
• UL, CE and RoHS compliant

Max Operating Voltage: 12V
Max Power Consumption: 14.4W / 1.2A (per meter)
Beam Angle: 120°
Service Life: 50,000 hours
Length: 500mm

12V power source
Optional RGB LED driver for special effects (sold separately, see "Accessories" tab below)

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:

Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:

Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

JenSen | Geverifieerde koper

  • Overall
  • Quality
  • Value

Good stuff

Feb 24, 2020

Easy to cut. Works great with any PWM led driver. Full power needs about 1.1A @1m length.

Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!