Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • USA

RotorBits Tricopter Kit met modulaire Assembly System (KIT)

RotorBits Tricopter Kit met modulaire Assembly System (KIT)

QTY:

Now save bewaar € 22,84 € 22,84

Special Price € 4,22 € 4,22

You save bewaar € 22,84 € 22,84

Was  € 27,06

Stock:
Gewicht:
630 g
SKU:
171000412-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
esc
battery
servo
motor
acc
Product
Omschrijving

Gewoon omdat je je lego en Erector sets kunnen zijn ontgroeid, betekent niet het plezier moet stoppen. De invoering van RotorBits, de modulaire constructie set van eindeloze mogelijkheden. Gebaseerd op het idee van gestandaardiseerde aansluitingen en afmetingen, de enige grens aan wat kan worden gebouwd is je eigen fantasie.

De RotorBits Tri-Copter is een ingenieuze aanpassing van de RotorBits modulaire delen, om een ​​unieke simplistische kijk op de zeer geliefde en grote vliegende tri-helikopter te creëren. Eén van de unieke Bits die in de Tri-helikopter, is het tandwiel mazen kantelmechanisme. Het kantelmechanisme neemt de eerder complexe motor tilt montage en vereenvoudigt het neer op slechts twee tandwielen en een servo. De modulaire tilt unit kan gewoon slip op elke RotorBits 10mm as. De felgekleurde TRI centrum plaat heeft 45x45mm geïntegreerde montage berichten voor de vlucht controller en diverse bepalingen voor de aanpassing van andere accessoires en bits. De landing skids hebben een zip-tie breakaway ontwerp en de maan lander afgeronde kop voeten voor gemalen skimming plezier. De simplistische modulaire idee maakt de montage in een handomdraai, waardoor plezier terug naar een soms meer dan complex idee.

RotorBits componenten kunnen worden uitgewisseld tussen meerdere projecten, zodat u kunt mixen en matchen om de inhoud van uw hart! Naarmate uw collectie Bits groeit en concepten ontwikkelen, zult u merken dat de mogelijkheden zijn eindeloos. Wie weet wat je zal komen met de volgende! RotorBits is een idee dat nooit kan worden achterhaald, maar opnieuw geconfigureerd.

Kenmerken:
• Modulaire slip samen bouw
• Duurzame glas gevuld nylon en carbon onderdeel
• Lichtgewicht
• Aanpasbare en herbruikbare RotorBits onderdelen
• Gear gedreven kantelrotor

specs:
Lengte: 155mm
Gewicht: 258g
Wielbasis of grootte: 555mm

RotorBits Inbegrepen:
3 x Carbon langsliggers
3 x Landing voeten
3 x steunpoten
1 x Tri center mount
2 x DST motorsteunen
1 x Tilt servomotor mount
1 x Bag of assemblage bevestigingsmiddelen en kabelbinders

Vereiste:
3 x DST-1200kv of vergelijkbare motor
3 x 20A multi-rotor SER
1 x 9g servo
3 x 10inch props 2 cw 1 ccw
1 x Flight controller
1 x 1500 ~ 2200mAh 3s 11.1V LiPoly batterij
1 x 5ch Radio systeem

Product
Specifications

Aanvullende Informatie

  • Sku:
    171000412-0
  • Brand:
    Nee
  • Gewicht ( g)
    630.00
  • Lengte
    330.00
  • Breedte:
    120.00
  • Hoogte:
    180.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
cumple con mi expectativas. se ve fabricado con muy buena calidad y muy ligero.
deberia llevar los taladros del carbono hechos.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Surprisingly heavy and there is a lot of slop in the servo connection. Most of the slop can be removed by gluing the components together though. Quite enjoying it so far.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The RotorBits Tricopter is simple yet elegant and easy to put together! It's like Lego for big kids and can easily be assembled with little knowledge in the area. I love the colour scheme and it is easily orientated in the air. The landing gear is sturdy and the zip-ties hold together really well. My only criticism (and the reason I gave the quality one less star) is because I had do some rectification the servo-tilt section and the gears. The servo they recommended/showed in the picture did not fit in the servo bay and the nylon gear was far too small for the gear teeth and it was hard to fix. I ended up super-gluing it and it managed. HobbyKing perhaps release a new version? Other than that I love it. And it is great value for money!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Brilliant bit of kit. Got me started and in the air nicely. very please. servo mount is a bit rubbish. but works extreeeemly well for the price.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got one of these in the mail today... Very robust and well designed kit.
Decided to order another one to build for night flying with some led light strips.
Pretty easy to put together.. I used the KK2.1 control board and setting it up was a breeze..
I assigned the autolevel to my landing gear switch so I could easily switch back and forth for acrobatic modes.
I used plush 18 amp esc.. DT 700 kv bell motors and an orange spektrum compatible receiver with satellite Corna 929 metal gear 9 gram servo for the yaw.
10x4.5 slowfly props (2 CW and 1 CCW) and get an easy ten minutes with 2200 mah Turnigy batteries.
I give it a hearty two thumbs up.. (ps.. I didn't use the screws and bolts per directions
I simply drilled a pilot hole and tapped it for the screws on one side.
Built a battery tray with 1.5 glass plate cut 1.25 x 7" and suspended it from the bottom with wire ties.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have two rotorbits tricopters and they are excellent very tough. I would highly recommend them
great for general fun flying and they fly great with the KK2 and recommended motors. Thanks Hobbyling for a great bargain.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Please do not overlook this frame kit !! I have built and crashed more multirotor kits then I care to admit to. This is the best kit I ever built. The first time that everything fit to a perfect match and ended up being one of the strongest one I have. Very Perice fitting of all components . May be a bit heavy . I love it !!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Received my kit today. A bit disappointed as the carbon fiber rods that come with it don't have holes , so you have to either buy the jig set for it or drill the holes very carefull.

The kit is very neat and nice .It Seems to be strong enough to handle some crashes. But this I will find out soon.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Awesome kit. My first multirotor and I was impressed with its quality. My only gripe was the servo mechanism. The recommend led servos do not fit without alot of fiddling around. Otherwise im happy with it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This was my first multi-rotor kit so i can't compare it to anything but i will say this i am happy with this kit. It was simple to put together and using the recommended electronics except for using my own servo it flies great . Very stable using the KK 2.1HC. The reason for 4 stars are because it did require some modification to the servo mounting area for my servo to fit properly as well as having play in the back area where the rear motor is mounted on. This was fixed using super glue :) Great product!!! Thanks Hobbyking!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • RotorBits TriCopter Kit With Modular Assembly System

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery
servo
motor
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.