New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

S500 Glasvezel Quadcopter Frame 480mm - Geïntegreerde PCB Version

S500 Glasvezel Quadcopter Frame 480mm - Geïntegreerde PCB Version

Shipped From:
  • USA
  • Global
QTY:

Now save bewaar € 0,00 € 0,00

€ 19,60
status:
In voorraad
Gewicht:
750 g
SKU:
426000002-0
WANT FREE SHIPPING? Click here to find out more!

Een uitstekende sterke lichtgewicht glasvezel Quadcopter frame met landingsgestel en een bonus stroomverdeling board (VOB) te bouwen-in voor het netjes en gemakkelijk bedrading. Deze quad heeft 480mm motorische centra is dus ideaal voor 9 en 10 inch rekwisieten en het heeft ook een instelbare accu te monteren om de perfecte gewichtsverdeling te bereiken en de onderkant van het frame is klaar om een ​​hele reeks van camera mounts en cardanusringen waardoor het perfect voor FPV nemen en filmen projecten.

De S500 wordt geleverd met 2 x blauw en 2 x zwarte armen die zijn super geribbeld en hebben een carbon fiber staaf door het centrum maken van de sterkste wapens die we hebben gezien tot nu toe in deze stijl van het frame. De blauwe en zwarte armen maken oriëntatie veel eenvoudiger en er is geen behoefte aan verschillende gekleurde props. De meegeleverde landingsgestel heeft veel van de hoogte waardoor het geschikt is voor GoPro soort cardanusringen of iets dergelijks. Een ander kenmerk van de S500 is dat wanneer de armen gemonteerd een lichte up sweep, dit geeft de quad een tweevlakshoek effect waardoor het zeer stabiel, vooral bij het afdalen van hoogte.

Montage van dit frame is super eenvoudig met pre-threaded mouwen voor het frame bouten zodat er geen lock noten nodig zijn. Het maakt gebruik van een maat bouten voor de gehele build wat betekent dat je alleen wilt een maat hex voor de montage. Een ander kenmerk is het lokaliseren van tabbladen voor de wapens die je in staat stelt om de perfecte afstemming te bereiken bij het bouwen. De motor mounts zijn klaar om een ​​selectie van de motoren te nemen met montage gat centra van 16, 19 en 25mm weer waardoor dit een zeer universele kader tegen een zeer betaalbare prijs.

Wij bieden een volledig assortiment van multi-rotor flight control boards, motoren, snelheid controllers, batterijen, camera mounts en cardanusringen en nog veel meer. Neem een ​​kijkje op de gerelateerde items, zodat u uw S500 kan bouwen en weten dat het gaat om briljant te voeren, is het nog nooit zo eenvoudig of meer betaalbaar om uw Quad te krijgen in de lucht geweest.

Kenmerken:
• Gebouwd van kwaliteit glasvezel en polyamide nylon
• Pre-threaded koperen hulzen voor alle frame-bouten
• De plaats van tabbladen voor armen
• Gekleurde armen voor oriëntatie om u te helpen om te blijven vliegen in de goede richting
• Geïntegreerde PCB aansluitingen voor directe solderen van uw SER
• Eenvoudige montage

specs:
Motorische centra: 480mm
Lengte: 170mm
Gewicht: 405g (alleen montuur)
Motor Mount Bolt gaten: 16 ~ 19 ~ 25mm

Vereiste:
4 x 28mm 800 ~ 1000KV motoren
4 x 18 ~ 30A regelaars
4 x 9x4.7 ~ 10x5 props
1 x HobbyKing® multi-rotor control board
1 x 2200mAh 3S 11.1V om LiPoly batterij of meer.

  • Sku 426000002-0
  • Brand Unknown
  • Capaciteit ( mAh ) -
  • Gewicht ( g) 750.00
  • Lengte 290.00
  • Breedte 55.00
  • Hoogte 175.00
  • Quadcopter s500 review
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I Purchased this as a first build from scratch for me. I read about the legs being a concern & thought they would be ok, However I have just completed my 5th flight & had a slight bounce on landing, next thing I know is the props hitting the floor ! The legs are in deed very weak.
I cannot stress how much this can put you off this machine, I would love to be able to put a different type of undercarriage on it!
Other than the legs everything else is spot on.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I Purchased this as a first build from scratch for me. I read about the legs being a concern & thought they would be ok, However I have just completed my 5th flight & had a slight bounce on landing, next thing I know is the props hitting the floor ! The legs are in deed very weak.
I cannot stress how much this can put you off this machine, I would love to be able to put a different type of undercarriage on it!
Other than the legs everything else is spot on.

I wanted to build a quad from scratch to fly a Gopro 4. Overall I'm happy with the product, but if I would have to do it again I would get a S550 hex and 4S battery because of the extra lift capacity. Without the gimbal I get 14 min of very gentle flying with a 3S 5000mAh nanotech battery and 10x4.5 props. With gimbal ~10 min.

Two things to consider are the screws are of poor quality, after assembling/dissembling the frame a couple of times during building the heads have worn out. Furthermore I have lost a couple of the screws during flight.. Secondly the legs are very poor quality and break very easily! The rest of the frame is very strong, I have a pretty bad crash and only the legs broke!

My setup:
Multistar 2216-800kv motors
MultiStar 30A BLHeli-S ESC
Gemfan 10x4.5 and 11x4.5 props
5000mAh 3S lipo
DJI Naza-m V2
DJI Zenmuse H3-3D

My gain settings:
[Pitch, roll, yaw, vertical]
Basic: 120, 120, 100, 120
Attitude: 100, 100

Angular rates: 200, 200

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I wanted to build a quad from scratch to fly a Gopro 4. Overall I'm happy with the product, but if I would have to do it again I would get a S550 hex and 4S battery because of the extra lift capacity. Without the gimbal I get 14 min of very gentle flying with a 3S 5000mAh nanotech battery and 10x4.5 props. With gimbal ~10 min.

Two things to consider are the screws are of poor quality, after assembling/dissembling the frame a couple of times during building the heads have worn out. Furthermore I have lost a couple of the screws during flight.. Secondly the legs are very poor quality and break very easily! The rest of the frame is very strong, I have a pretty bad crash and only the legs broke!

My setup:
Multistar 2216-800kv motors
MultiStar 30A BLHeli-S ESC
Gemfan 10x4.5 and 11x4.5 props
5000mAh 3S lipo
DJI Naza-m V2
DJI Zenmuse H3-3D

My gain settings:
[Pitch, roll, yaw, vertical]
Basic: 120, 120, 100, 120
Attitude: 100, 100

Angular rates: 200, 200

Very lightweight, easy to assemble. I love it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very lightweight, easy to assemble. I love it.

This frame is sturdy and easy to assemble, the legs are plastic but sturdy, However there is not much room for my Naza m lite flight controller. I mounted it on the bottom plate and the top plate pushes against the flight controller when I mount the top plate. I don't have any room to put my battery strap through the top plate. I wish HK would have put in the item description that this frame best fits slim flight controllers.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This frame is sturdy and easy to assemble, the legs are plastic but sturdy, However there is not much room for my Naza m lite flight controller. I mounted it on the bottom plate and the top plate pushes against the flight controller when I mount the top plate. I don't have any room to put my battery strap through the top plate. I wish HK would have put in the item description that this frame best fits slim flight controllers.

con este inicie en los quadcopter

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

con este inicie en los quadcopter

Great frame. Very stable and perfect for aerial video. I'm using 2212 motors with 9045 props (switching to 1050) and it runs smooth as silk. If no camera gimbal is used, ensure battery is slid forward to form a good balance. Landing gear are more fragile than toothpicks, but replacements are cheap and plentiful. The plates are rather narrow, pretty much forcing location of the FC to the top, but still well laid out.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great frame. Very stable and perfect for aerial video. I'm using 2212 motors with 9045 props (switching to 1050) and it runs smooth as silk. If no camera gimbal is used, ensure battery is slid forward to form a good balance. Landing gear are more fragile than toothpicks, but replacements are cheap and plentiful. The plates are rather narrow, pretty much forcing location of the FC to the top, but still well laid out.

Excellent frame, well finished, strong arms and the integrated solder point for the XT60 is perfect. I Just finished this frame with Naza Lite upgraded to Naza MV2( thanks Naza Upgrade Project!), Sunny sky 2212/13 980Kv, the new Flycolor 20A Raptors with Bl Heli, and 1045 Gemfan carbon nylon props. However the Naza will NOT fit between plates without touching so I added some spacers between bottom plate and arms. A couple of millimetres is all that's needed. Perfect combo on 3s power, and using the Multistar 5200mah I get approx 15 mins. Next will be adding a dual battery mount and testing some Nano Tech 4s batteries with 9045's. Great frame and for the money a super deal,highly recommended! Look forward to building the S550 for AP and FPV. Thanks HobbyKing

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent frame, well finished, strong arms and the integrated solder point for the XT60 is perfect. I Just finished this frame with Naza Lite upgraded to Naza MV2( thanks Naza Upgrade Project!), Sunny sky 2212/13 980Kv, the new Flycolor 20A Raptors with Bl Heli, and 1045 Gemfan carbon nylon props. However the Naza will NOT fit between plates without touching so I added some spacers between bottom plate and arms. A couple of millimetres is all that's needed. Perfect combo on 3s power, and using the Multistar 5200mah I get approx 15 mins. Next will be adding a dual battery mount and testing some Nano Tech 4s batteries with 9045's. Great frame and for the money a super deal,highly recommended! Look forward to building the S550 for AP and FPV. Thanks HobbyKing

I bought this frame as an entry into quad flying. It has survived several hard crashes only requiring a replacement landing skid. The screws going through the skid and into the lower part of the arms are a bit short and can pull out. I would recommend purchasing some screws a few mm longer if the frame is going to have a hard time. Very good frame to start with and probably very good for an experienced flyer as well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this frame as an entry into quad flying. It has survived several hard crashes only requiring a replacement landing skid. The screws going through the skid and into the lower part of the arms are a bit short and can pull out. I would recommend purchasing some screws a few mm longer if the frame is going to have a hard time. Very good frame to start with and probably very good for an experienced flyer as well.

I like the way the frame went together. I'm spinning 11x5.5 props using 35 series motors. FC is a pixhawk. It's very fast and stable. However, one of my arms had a manufacturing defect and broke as soon as I gave the motors some throttle. Replacement arms are only $5, so buy spare arms right off the bat.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I like the way the frame went together. I'm spinning 11x5.5 props using 35 series motors. FC is a pixhawk. It's very fast and stable. However, one of my arms had a manufacturing defect and broke as soon as I gave the motors some throttle. Replacement arms are only $5, so buy spare arms right off the bat.

Awesome quality, very strong, arms are very stiff. Bargain price. I also have the S550 which is even better. 5/5.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome quality, very strong, arms are very stiff. Bargain price. I also have the S550 which is even better. 5/5.

  1. 1
  2. 2
  3. 3
  4. 4
Customer files
S500 PCB version Download [2962]
Mounting plate.jpg Download [1080]
No File Name Download [30]
S500 Ready to fly Download [130]
S500 manual Download [3614]
ready to fly Download [1]
IMG_20180328.jpg Download [272]
IMG_20180328.jpg Download [272]
S500 (SK450) Shark X6 FC Download [272]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save