Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Scanner RC 150A ESC (1 / 10Scale)

Generating Links

Scanner RC 150A ESC (1 / 10Scale)

Prijs:

Now save bespaar € 0,00 € 0,00

€ 45,91
Verzonden vanaf:
  • Global
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
SCS-150A-HS
Geen verzendkosten? Klik hier meer leren!

Vervaardigd in Taiwan van hoogwaardige componenten van de scanner RC Competition Racing reeks 1 / 10e Car SER bieden compromisloze kwaliteit die je in de winnaars cirkel zullen zetten.

Met een Atmel IC met een resolutie van 1024 DPI deze SER bieden extreem glad en precieze gashendel.

Specificatie:
Cont. Current: 150A
Burst Current: 180A (10 seconden)
Car Grootte: 1/10
Batterij: 2-3 Cell LiPo
BEC: 6V / 5.0A
Motor Type: Sensored Brushless
Size (HxLxW): 27 x 42 x 40mm
Gewicht: 67.9g (met inbegrip van draden, Heatsink en Fan)
Motor Stekkers: Verplicht
Batterij Plug: Verplicht
Aan / uit-schakelaar: Ja
Keerzijde: Ja

Programmeren opties (via optionele programmering card)
Cut-off Voltage: 2.6V ~ 3.4V
Running Mode: Vooruit + Brake / Vooruit & Reverse + Brake
Motor Timing: 2DEG ~ 12deg
Startup: Low / Mid / High / Peak High
Brake Force: 20% ~ 100%
Aanvankelijke Brake Force: 10% ~ 100%
Drag Brake Force: 4% ~ 30%
Schakelen: 8Khz / 16Khz
Nuetral Bereik: 2% ~ 6%

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

| Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Mar 12, 2012

dont use this for a 2.5t cant take the punishment

Allen | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Jan 05, 2012

I just wanna say good job, this ESC is totally powerful, I am still using and working well!! especially the new version 2 is also adding top fan case for better protect.

Allen | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Nov 29, 2011

no more word, the ESC is top quality and 150A MOS-FET is enought for most Brushless motor, I am very happy with nice price too, thank HobbyKing, good job!!~!

elytoros | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Nov 02, 2011

ESC ben fatto ,e senza nessun problema di assemblaggio,molto semplice da settare (ho tradotto il manuale da inglese in italiano)con la radiotrasmittente.

Lo provato su una barca per dieci minuti e riscalda molto poco.

L'inconveniente e che ESC non e settabile col Turnigy 2 in 1 Professional Program Box for Brushless ESC ,e col

TURNIGY BESC Programming Card,

foto del manuale tradotto in ITALIANO su FILES

chotirotos | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Oct 22, 2011

Bad, bad, and bad...

Bought 2 and both burned, one in 3 gas pulls, the other one was 5 batteries, both with 6t ScannerRc motor.

I dont recomend this speed controler.

elytoros | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Oct 20, 2011

ok lo provo e scrivo i commenti

justin | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Oct 04, 2011

I bench tested this esc with a 2800kv motor with 3s battery. it wasn't right from word go and within 10 min it developed a dead short. It never even made it into a car.It's been over 1 month and HK are still in the process of checking it, therefore i would not advise buying one

Imprez | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Sep 22, 2011

I receved mine yesterday, in despite of a lot of negative coments i decided to buy it.
The ESC is not like that photo, is more like this:
http://imageshack.us/photo/my-images/560/20092011002.jpg/
http://imageshack.us/photo/my-images/853/20092011003.jpg/
It comes with 14AWG wires, so it is not difficult to doubt if it can really handle 150amps.
I am using it in my pan car 1/10 and scanner 6000kv brushless, it does not warm, probably works on 40C with this combination (17-81 teeth and small diameter tyres)
the fan is powerful, it makes "windy" arround the car. The BEC DOES NOT work at 5 volts, it works at 6 volts, measured by my voltimeter.

BE CAREFUL be sure that the phases are U with A, V with B, and W with C in sensored mode.

IT WORKS SENSORLESS TOO

the instruction manual is very poor, and to program it you'll need the programing card, or actually I didn't find the way to get in the programation with the programming button.

the screws CAN'T touch the fets, someone wrote that, at least in mine it is impossible, it has only 4 to hold the fan holder and the underbox.

I can't tell you more by the moment because it has some minutes of use, by the moment it seems a cheap ESC not too much powerful, and smooth, for 1/10 4x4 touring car it will need 12AWG wires. that is all hope I can help you.

luigino007 | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Sep 18, 2011

Really not happy with this esc, only ran it a few times, put a 3s thru it and it died. Took the esc out and i shook it because i heard a rattle, one of the drive chips had come off and was rattling around inside the case. Id go for a HK equivalent for the extra couple of quid.

Kvochin | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Aug 20, 2011

Very good ESC!
But works only in sensored mode. I try to run whith sensorless mode and its always "beeps" and not work

  1. 1
  2. 2
Klantbestanden
No File Name Download [945]
manuale in Italiano scanner Download [453]
No File Name Download [945]
Scanner 150A ESC Manual Download [945]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!

Accessoires