SCRATCH/DENT - Interference Shielding Module for Storm32 BGC

Item used in photo shoot only - Non AU Stock item. Appears to be complete and unused in original packaging.

Warranty:
No warranty available for this item.
Please do not ask questions as the item will be sold out within 24hrs.
No backorders allowed.

Scratch & Dent items are sold as-is. What you see in the photo is what you will get.
Because HobbyKing loses money on each Scratch/Dent item sold we cannot offer warranty or answer questions on these products.

Item will be deactivated once a 0 stock level is reached.

Please see product Interference Shielding Module for Storm32 BGC for more details.

Are you having communication errors between the sensors and main control board of your 3-axis brushless gimbal especially with the slip ring? Between the sensor and the main board IIC communications protocol is used but this can get errors as the distance between them increases. With the gimbal controllers the distance is often large enough from the sensor to main board for the brushless controller to be very susceptible to interference. Especially the storm 32 gimbal controller. Once there is a communication error, the system will not work normally.

The problem is now solved. Using this hardware changes the communication mode to stop any errors.

Features:
• Removes communication interference between gimbal sensors and the main board of the controller

Specs:
Size: 25x8x3mm (each board)
Weight: >1g (each board)

Package includes:
1 x Master Controller
1 x Slave Controller
1 x Cable