Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Servoless intrekbaar landingsgestel Front (Steerable)

Generating Links

Servoless intrekbaar landingsgestel Front (Steerable)

Prijs:

Now save bespaar € 0,00 € 0,00

€ 13,68
Verzonden vanaf:
  • Global
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
STTE-03
Geen verzendkosten? Klik hier meer leren!

De eenvoudigste manier om trekt in je vliegtuig te zetten. Geen behoefte om een ​​schakelkast, rommelige bedrading of een ingewikkeld lucht systeem te installeren. Schroef in de terugtrekt, dient u uw Rx en je bent klaar!
Betrouwbare servo mechanisme met metalen gearing en een hoog koppel motor zorgt voor probleemloos vliegen!
Waarom moeite met luchtsystemen als je nu kunt hebben een realistische en betrouwbare elektrische eenheid tegen een fractie van de prijs ?!

Kenmerken:
3 seconden over de huidige en jamming bescherming
Inclusief montage op de steun van 90 graden te draaien wanneer ingetrokken
Smart circuit houdt het apparaat ingetrokken, zelfs als u de stroom aan te sluiten. Alleen de zender signaal kan verlengen of intrekken van de versnelling.

Spec.
Werkspanning: 4.8 ~ 6.0V
Werken stroom: 0,1 ~ 0,3 A (3 seconden meer dan de huidige bescherming)
Niet geschikt voor een vliegtuig zwaarder dan 2,5 kg

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

LaserBeam | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

May 25, 2012

The Servoless Retracts are an excellent product. Very good value for money and they perform well. Im a big fan of the MainRetracts (STTE-2) which HobbyKing also sells (or used to). The NoseWheelRetracts (STTE-3) can be setup in several ways. Click the FILES tab above and find 'RetractInfo -LaserBeam' for the INSTRUCTION MANUAL for the STTE-2 and the STTE-3 servoless retracts. ie. Instructions for BOTH the Main Retracts and the Nose-wheel Retracts. Its in .PDF for best viewing. Enjoy :)

Herbyaespen | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Apr 14, 2012

Ebenfalls vorgesehen fr Parkzone T28

| Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Mar 01, 2012

Gute mechanik, alles Bestens.

Dave W | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Feb 25, 2012

I connected to my Futaba 8FG and R6208SB. Works great. No EPA adjustment necessary. I was hesitant to buy this because of other reviews but, as long as you dont repeatedly test cycle them, they should last a long time. Mounting depth is 23mm!

Deman | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Feb 11, 2012

I orderd three of these and 3 packets arrived with my order but 1 packet was empty. A service ticket was opened then promptly closed as being "resolved" but numerous contacts made and still no replacement or credit for the missing retract. So I'm giving a now incomplete and hence useless set of retracts 1 crown. Com'on HK some follow up and service please.

Narcizo | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Jan 27, 2012

It has a huge gap in any position. Otherwise, it is cheap and works where precision is not required. I'll try to minimize the gaps. Never mind the warning not to open because it is quite easy reassembling.



rob0101 | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jan 17, 2012

Solid retract, using on 70mm EDF jet.

pardus | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Jan 04, 2012

The leg fit into the unit is very sloppy causing imprecise steering and imperfect retracting, also either steering system (pull-pull or pushrod) is not easy to setup.
If using the pull-pull system for steering the leg's looseness causes it to rotate when retracting frequently causing a jam, if using the pushrod system for steering it jams up often too as the parts don't always line up.
The price matches the quality, mine is however, still operating fine after 100's of (testing) cycles.

| Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Oct 23, 2011

This is a Changesun electric retract. Quality is correct for the price tag. Works flawlessly with a 2,4ghz Futaba receiver. Mounting this on a 2,5kg model seems a bit optimistic too me. I wouldn't install this on anything heavier than 2kg.

HappySundays | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Oct 03, 2011

I tried these for the F9F Lander Phantom, which had to be extensively modded to make them fit.
The shaft is 1/8", not 3mm. No mounting screws are provided.
The leg is made from carbon steel. You will not be able to bend them without heating them. I think they are made to interface with other wheel assemblies normally.
I used a butane torch to heat the areas to bend and was able to made a nice front leg arranegment from it but you need to heat the leg to glowing red hot.
Naturally, you should remove the leg from the assembly first. It is retained by a circlip. Finally, I think the jam detction is overly sensitive. It stops at the slightest resistance and am not sure it will have enough torque to pull the steering cables tight before the anti-jam kicks in.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Klantbestanden
RetractInfo -LaserBeam Download [1182]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!