Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Shark X6 Multi-Rotor Flight Control en Autopilot System w / GPS

Generating Links

Shark X6 Multi-Rotor Flight Control en Autopilot System w / GPS

Prijs:

Now save bespaar € 0,00 € 0,00

€ 123,67
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
686000001-0
Geen verzendkosten? Klik hier meer leren!

The Shark X6 multi-rotor controle en autopilot systeem is vanaf het begin ontworpen om tegemoet te komen aan de steeds hogere eisen van de multi-rotor liefhebber.
De veelzijdige Shark X6 is een sterk geïntegreerd en compact ontwerp dat uitstekende vliegprestaties biedt.

Uitgerust met een 3-assige gyro, 3-assige versnellingsmeter, barometer en compleet met een GPS-module met behulp van vooraf algoritmen houding stabilisatie, het systeem biedt volledige failsafe bescherming voor uw multi-rotor inclusief de terugkeer naar huis, lage spanning bescherming en automatische landing.

Om het leven gemakkelijker te maken voor nieuwkomers en tijdens het vliegen op een afstand van de Shark X6 voorzien van intelligente Control (IOC) die, net als de meer bekende "headless" -modus, kunt u nauwkeurig te regelen uw multi-rotor, zelfs als je niet in staat zijn om zien welke kant het wordt geconfronteerd. Dit gebeurt door de oriëntatie van het model te koppelen aan de handset als IOC is geactiveerd, zodat (bijvoorbeeld) links steeds overblijft ten opzichte van de handset, ongeacht hoe het model wordt geconfronteerd.

In de praktijk betekent dit dat als je het model wilt gaan naar uw linkerkant als je er naar kijkt, je gewoon de stick naar links. Hetzelfde geldt voor rechts / vooruit / achteruit etc.

The Shark X6 heeft de mogelijkheid om door de gebruiker gedefinieerde, geo-omheind vlucht zones te creëren, zodat je vlucht kan beperken tot een gekozen gebied, of uitsluiten van een bepaald gebied van de toegestane vliegplan. Dit wordt een steeds belangrijker vliegveiligheid functie, in het bijzonder bij het gebruik van multi-rotoren in de buurt van de bebouwde kom.

Geïntegreerde failsafe functies bieden gemoedsrust in het onwaarschijnlijke geval van signaalverlies zodat u kunt kiezen tussen terugkeer naar huis, auto-landing of positie te houden wanneer de failsafe is geactiveerd. Fail-safe is geselecteerd via de assistent-software. Standaard waarde wordt gedefinieerd als terug naar huis.

Alles bij elkaar genomen, de Shark X6 biedt een geweldige all-in flight controller voor diegenen die hun multi-rotor-ervaring naar het volgende niveau en verder te nemen.

Kenmerken:
• Ondersteunt X, Cross, Tri, Hex, Tri-Hex, Octo en Octo-X configuraties
• Automatische piloot
• Een belangrijke Terug naar Home (RTH)
• Failsafe (RTH)
• Auto landing
• Intelligent oriëntatie controle (aka headless mode)
• Geo-fencing
• Data opname functie
• 6-kanaals PWM-ondersteuning (Futaba / JR / FrSky / WFLY)
• Safe-start
• Online firmware-updates

specs:
Ondersteunde configuraties: X, Cross, Tri, Hex, Tri-Hex, Octo en Octo-X
Ingangsspanning: 5V DC (van voedingsmodule)
Power module ingang: 7 ~ 26V (2 ~ 6S LiPoly)
Aanbevolen Zender: PCM of 2,4 GHz 6 Ch
Bedrijfstemperatuur: -10 ° C ~ 50 ° C
Kabellengte: 130mm
Afmetingen: 58 x 36 x 19mm (hoofdtoestel) GPS / Kompas: 46 (dia) x 9mm
Gewicht: 38g (hoofdtoestel) GPS / Kompas: 21,3 g

inbegrepen:
Shark X6 vlucht controller
GPS / kompas unit
LED / Power module
accessoireset

Link naar online handleiding:
http://www.fly-shark.com/Product?id=FlightTools&&Inf=Manual

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Vcopter | Geverifieerde koper

  • Overall
  • Quality
  • Value

Good product. Reliable and easy to use.

Nov 15, 2019

Have logged over 20 hours of flight time on my Shark X6 flight controller with no problems. Position hold is accurate within 2 feet horizontal and 1-2 feet vertical. Return to home is flawlessly reliable. The only issue I have is that the compass heading on the OSD reads backwards. I have a second unit now that has the same problem. Must be a firmware glitch and I wish I knew how to fix it. Not really an issue that affects performance though but the only reason I gave it 4 stars for quality. I am flying it on a 450 size quadcopter and enjoying it. I wish there was customer support for Big Fly Shark.

sgtbraddick | Geverifieerde koper

  • Overall
  • Quality
  • Value

shark x6 flight controller

Oct 16, 2019

looks to be well made easy to setup but lacks good instructions

Connor | Geverifieerde koper

  • Overall
  • Quality
  • Value

Does not work correctly

Oct 14, 2019

No manuals or software supplied. After reading reviews/discussions found others had same issues. Found software and firmware. But old. Got firmware installed, got working on PC. The accelerometer will not set to zero, motor tests are intermittent. The company who made these closed the website April last year so no support. Got compass, gyro and everything working except the accelerometer, motors will initialize but motors will not go. Very hard product to use with no support for issues and little info on led codes.

h1405 | Geverifieerde koper

  • Overall
  • Quality
  • Value

good

Apr 06, 2018

nice value for the price during spring sale (around USD 50). Works well and tested with s500 quad x. Tested the following functions and all worked well: alt hold (no gps), gps hold, balance mode, RTH. Not tested the other functions because one of my esc failed but has nothing to do with the FC. I use the power module from this board to power because it has voltage alarm (red LED flashing several times). I did not tune anything yet and the result is quite stable (small wobble on Z axis).

Nidge | Geverifieerde koper

  • Overall
  • Quality
  • Value

Good economical Flight Controller

Mar 29, 2018

I purchased this in the recent warehouse clearance from the EU Warehouse.
I’ve seen quite a few folk have had issues getting this to connect to a PC.
First of all when updating the Firmware you need to use the Offline update tool, not the flight tools software. First connect the USB without a battery. Next select the firmware file to upload. Now connect the battery and select upgrade.
I’m running the latest, as of March 2018, W10 and I’ve not had any issues connecting.
To connect to FlightTools you need to have a valid PWM signal from a receiver to the F.C. First connect a battery to the F.C. and the LED module should start to flask through the various colours. Now connect the USB to you PC. FlightTools will respond with the chain icon changing to green and the status message “Get Parameter OK” and a flight time clock advancing. Now you can configure and calibrate the flight controller.
By today’s standards the F.C. is quite dated but the GPS acquisition is quite fast, even from indoors.

Christoph | Geverifieerde koper

  • Overall
  • Quality
  • Value

after newest v2 firmware - great!

Mar 27, 2018

I load the new v2 firmware on the FC and can now use the Flight Tools 2.3 Software. On my OrangeRx R615X I have to change AUX1 and GEAR. The RTH Mode is perfect.

Paul | Geverifieerde koper

  • Overall
  • Quality
  • Value

latest firmware? can not update the board (but not flashed yet)

Mar 26, 2018

Can only connect using windows 7 computer but no update. Can somenone tell what is the latest version of firmware that will work? I have not flashed yet. The latest file i found is from 2015.
paul@webstekje.be

Paul | Geverifieerde koper

  • Overall
  • Quality
  • Value

latest stable firmware update?

Mar 23, 2018

I can only 'see' the controller in old version of fc tools (X8_Assistant 1.4), but not update. It works only on my sons old windows 7, not windows 10. Before flashing (and maybe bricking it), can someone tell witch firmware will work on this version one? is this version Firmware SHARKX6 V1 for CX20 Ver151? kind regards, paul@webstekje.be

Henk W. | Geverifieerde koper

  • Overall
  • Quality
  • Value

Shark X6 multi-rotor board

Nov 29, 2017

I'm very disappointed. The flight board is very unreliable. I tried to contact mikec@aloha.net for advice. But his email address does not exist ...

Mark | Geverifieerde koper

  • Overall
  • Quality
  • Value

Shark X6

Jan 09, 2017

Very easy to install and setup, great quality with all extras you need included.
Extremely stable flight on my TBS Discovery, all modes work very well as described.
Be sure to update to the latest firmware.
Very good unit that works exactly as described.

  1. 1
  2. 2
Klantbestanden
Potvrzení o zaplacení.doc Download [28]
COIN01_CamOne_infinity_Manual_1.05_EN.pdf Download [3]
skarh x6 on sk450 Download [27]
Shark X6_8 Manual.pdf Download [841]
shark_x6_8_manual.pdf Download [841]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!

Accessoires