Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

SIX Glasvezel Hexcopter Frame 600mm

SIX Glasvezel Hexcopter Frame 600mm

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
924 g
SKU:
323000047

Combine

essential items and
esc
motor
acc
Product
Omschrijving

De zes is een hoge kwaliteit hexcopter kader dat een fraai uiterlijk en prestaties tegen een prijs die niet kan worden overtroffen heeft! de SIX gebouwd bijna volledig uit het lichte gewicht toch stijf glasvezel, biedt een geweldige combinatie van gewichtsbesparing en sterkte.

Deze hex montuur is voorzien van verstelbare steunpoten zodat u het frame aan uw behoeften aan te passen. U kunt de landing benen uit te schuiven in de richting van de randen om het meer stabiel op de grond te maken en kan ook de hoogte in te stellen.

De toegevoegde hefvermogen van een hex-configuratie maakt dit frame ideaal voor het vervoer grotere nuttige lading, zoals camera's en andere elektronische componenten. Dit zorgt voor een uitzonderlijke camera rig of gewoon een zeer flexibele en krachtige multi-rotor frame voor aerobatics!

Wij bieden een volledige lijn van multi-rotor elektronica, zoals multi-rotor control board, ESC, motoren en nog veel meer, dus het is nog nooit zo eenvoudig of meer betaalbaar voor een hexcopter te krijgen in de lucht geweest!

Alle benodigde hardware is inbegrepen, voeg enkel uw eigen elektronica.

specs:
Gewicht: 625g (frame zonder elektronica)
Breedte: 600mm
Motor Bolt gaten: 19mm breedte

Vereiste:
Multi-Rotor control board
20 ~ 35A brushless ESC x 6
3 ~ 4S 2650 ~ 3300mAh batterij LiPoly
28-XX ~ 35-XX 700 ~ 1000KV borstelloze motor x 6
9x5 ~ 10x5 propeller - 3 standaard / 3 linksdraaien

Product
Specifications

Aanvullende Informatie

  • Sku:
    323000047
  • Brand:
    Nvt
  • Gewicht ( g)
    924.00
  • Lengte
    340.00
  • Breedte:
    125.00
  • Hoogte:
    185.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
The frame arrived well-packaged and took 15-30 minutes to easily assemble. Instructions were not included but there are some under the 'Files' tab. Have not yet tested this frame for vibrations, but it is likely to produce little - I found that all joins were tight and rigid. Great value for money.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just got the kit today and on first impressions looks good.
The one BIG problem, which I thought may have been rectified following the last review, is there is NO plans with the kit.
This may not be a problem for some, but, for people like myself who are disabled, it can be a daunting task trying to put together the hundreds of small parts without any reference.
Please guys, it may be little cost for a good product but I for one, would gladly pay a few coppers more to have a couple of sheets of paper with information on how to put the thing together.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
First off I was really happy with it, eventhough landing gear is totally crap and will not survive any rough landing.
Motor mounts are loosely fitted to booms.
The booms will twist and wobble wich causes tremendous problems for a bit heavier model, I flew with about 3Kg total weight, with intermittent problems normally caused just after high power thrusts, this was traced to wobbling arms due to the high power torque, FC then tried to compensate an unstable frame.
at 3.5Kg the model was unflyable resulted in crash and broken arm beyond repair. No spare parts are available as of now.

Now I'm using the center soucer parts with custom ALU square booms
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Annoying issues with a few of the aluminum spacers they were mis-drilled and wouldn't accept screws from the one of the sides. The landing gears are EXTREMELY frustrating as they are very hard to lock into place where you actually want them they also do not move very freely. It took serious sanding just to get the parts to fit together. Overall though it was a good bargain considering the cost and strength of the materials.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This kit is outstanding. Very easy to assemble. I was able to build it in 15 to 20 min with motor. Now I need to add everything ells. Cant wait to fly it. Very nice

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
MoinMoin!
Dieser Hex ist vom Preis-Leistungsverhltniss ganz gut. Leider gibt es auch Makken... Bei einigen Alu Bolzen war das Gewinde so krumm geschnitten das ich sie entsorgen musste. Ansonsten funzt der Zusammenbau ganz gut.
Beim Landen unbedingt drauf achten das das Aufsetzen immer sehr vorsichtig erfolgen muss! Das Landegestell ist sehr zerbrechlich und grazil.
Alles in allem passt der Hex schon...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a great hex frame however you need to remember you are spending 20! A little bit of sanding is needed to get the legs to fit correctly (very simple) and there are no instructions..... not too difficult once you stop and think. Dont rush the build or think it is a 2 minute job!! Looks GREAT when built and nice size. I'll let you know how it flies!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Der Hexcopter macht einen sehr stabilen Eindruck, der Zusammenbau ist auch ohne Anleitung uerst einfach. Da es sich hier um meinen ersten Multicopter handelt, bin ich auf die Flugeigenschaften sehr gespannt!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Easy to assemble,
good quality of fiberglass,
fit and finish close just some little sanding for tight fit.
For KK2 need to drill holes on top plate.
Fly good, strong frame,
no vibration,
plenty of space for mounting.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • SIX Glass Fiber Hexcopter

  • Glass Fiber Hexicopter

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
motor
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.