Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

SKYRC BD250 250W 35A Super Discharger & Battery Analyzer

Generating Links

SKYRC BD250 250W 35A Super Discharger & Battery Analyzer

Prijs:

Now save bespaar € 0,00 € 0,00

€ 69,35
Aantal stuks:
Verzonden vanaf:
  • USA
  • Global
  • EU
Al gekocht
Geschatte aankomsttijd: Geen Geschatte Aankomsttijd [ ? ]
Toestand:
Nabestelling
SKU:
9052000154-0
Geen verzendkosten? Klik hier meer leren!

The SKYRC BD250 is a powerful discharging unit that allows the user to discharge a battery pack at up to 35 amps or 250 watts, it also measures and compares their performance. The BD250 has the ability to discharge, test, and analyze virtually any type and size of battery, regardless of chemistry and the number of cells up to a voltage of 35V.


The BD250 is small and ruggedly built with a high-performance cooling system. It has 2 x digital LED displays that indicate battery voltage, discharged capacity, and discharge current. Setting the values and starting and stopping is very simple with the one-piece rotary dial. Keep your batteries in tip-top condition and take the guesswork out of choosing the best battery for your application with the SKYRC Super Discharger.


Features:
• Displays battery voltage, discharged capacity, and discharge current
• Has a built-in high-performance cooling system
• Will discharge and analyze batteries
• Will test virtually any type, size, and chemistry of battery up to 35V
• Saves time when discharging large capacity batteries
• Easy to use rotary dial for start/stop and settings
• Has built-in XT60 and data link ports


Specs:
Voltage Range: 5.4~35V
Max Discharge Power: 250W
Discharge Current Range: 0.01~35A
High Voltage Alert: 35V
Low Voltage Alert: 5.2V
Capacity Display Accuracy: ±3%
Current Display Accuracy: 0.01~10A ±60mA, 10~35A ±3%
Voltage Display Accuracy: 5.4~10V ±80mV, 10~20V ±120mV, 20~35V ±160mV
Battery Connector Port: XT60
Protection: 40A blade fuse
Dimensions: 136.6x104.8x107mm
Weight: 879g


Included:
1 x SKYRC BD250 250W 35A Super Discharger & Battery Analyzer
1 x XT60 fly lead
1 x Spare 40A blade fuse


Note: There is a copy of the User Manual under the "Files" tab.

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Jabke | Geverifieerde koper

  • Quality
  • Overall
  • Value

Best décharger ever!

Apr 07, 2022

Need to quickly getting your batteries to a storage voltage? Look no further.
In a few minutes your batteries are back to acceptable voltage. You can go as high as 20 amps. I even don´t need that. Its a good wonderful musthave if you us lipo´s. While looking at the news on tv, My complete unused loaded ser of batteries are back in a state for storage. One remark: it does not balance your cells. No worries, next time you charge them again with a balancing charger.

Randy B | Geverifieerde koper

  • Quality
  • Overall
  • Value

Discharger

Mar 20, 2022

I use this product to discharge charged LiPo batteries that didn’t get used, and put them into storage mode. It works well for this purpose, and is very helpful in battery maintenance.

Axel | Geverifieerde koper

  • Quality
  • Overall
  • Value

unglückliche Software

Mar 14, 2022

Nach Entladen des Akkus kann man sich Kapazität ca. 10 Minuten ansehen, danach schaltet das Gerät ab und die Kapazitätsangabe ist gelöscht.

Dagoberto | Geverifieerde koper

  • Quality
  • Overall
  • Value

Good product with an important defect

Mar 11, 2022

Let's start by saying that I really like this discharger. It is, by far, the most powerful discharger I have. But it has a problem, though: If I'm going to store, let's say, a 3S battery, I set the target storage voltage to 11.4 V (3.8 V x 3 cells) and the discharge current to 18 A (well within the 250 Watt limit)... but the discharger stops at 11.9 V!!! half a Volt over the intended target!!!.
It seems that the problem is with the voltage sag of the battery when a high current is drawn, and therefore I should instead set the target voltage to something slightly below 11 V in order to get the intended 11.4 V target. However, this shouldn't happen: This thing has for sure a microprocessor inside and it would be very easy for SkyRC to devise an algorithm to compensate for voltage sag, especially taking into account the previous experience of this company with the BD200 model. An almost unforgivable fault.

Ber60 | Geverifieerde koper

  • Quality
  • Overall
  • Value

Value for money

Feb 20, 2022

Works fine

Gil | Geverifieerde koper

  • Quality
  • Overall
  • Value

Fonctionne très bien et rentre le service

Feb 14, 2022

J'apprécie les réglages et le simplicité de la mise en œuvre. Cela peut servir à tester les batteries mais aussi les bec. Donc très utile et un très bon rapport qualité prix.

Atanas | Geverifieerde koper

  • Quality
  • Overall
  • Value

A Must have for LiPo users

Jan 20, 2022

It works flawlessly. PC Analyzer software is a good option to get check old battery condition and charge hold. For discharging very simple to use and very fast even for large LiPO-s for RC Cars. A must have in my opinion.
The only annoying thing is the beeper is super loud. A simple electric tape on top of it solution fixes this ;-)

Randy B | Geverifieerde koper

  • Quality
  • Overall
  • Value

Not working properly

Jan 16, 2022

When I tried to plug in 2200 mAh battery, only three digits showed, and it showed finished almost immediately, but it wasn’t discharged. Either I am using it incorrectly, or the unit is defective. I tried to get an exchange from HK, but was unable to exchange this Christmas present. I don’t understand the HK procedure to exchange. I also tried to email the company for further instructions, but got no reply. Very disappointed. Very bad experience, and lost money.

HK response: We are sorry to see this. We answer EVERY request so if you sent an email it went to the wrong place. We always encourage using our official support. There is a pending claim for this item and we've requested that it be returned for evaluation. Customer will receive full replacement, refund or credit as they prefer so no money will have been lost.

Juliaan | Geverifieerde koper

  • Quality
  • Overall
  • Value

A good device to get to know the condition off your battery .

Dec 30, 2020

Works very well ,instal the PC software and off you go .There is a firmware update available but it is not possible to download it ,Pc security software is preventing the update .

Klantbestanden
SKYRC BD250 Super Discharger User Manual Download [0]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!

Accessoires