Snapper7 75mm Brushless FPV Mini-Drone w/Frsky Receiver
Snapper7 75mm Brushless FPV Mini-Drone w/Frsky Receiver
Mini-drones are very popular and they make it extremely easy to take to the sky. The Snapper7 comes ready built and includes a FrSky receiver, 700TVL camera and 48 channel video transmitter to get you jumping into the air. It weighs only 28g (w/o battery) and has a 75mm wheelbase making it ideal for indoor flying but can still take you outdoors.
You will still need a FrSky compatible controller, a 1S 450mAh lipo battery and optional goggles to get the best onscreen flying. Power comes from small 9000KV brushless motors and easy control from an F3 flight controller with inbuilt OSD and running on Betaflight for easy configuration. This makes it easy to navigate all those obstacles or race tracks.
The Snapper7 has a carbon fiber base with aluminum propeller guards so it will take some punishment if you hit the table leg. Get yours now before they run out.
Features:
• Betaflight support, multi-flight mode: ACRO/AIR/ANGLE
• Powerful 19000KV Brushless motors and ESCs with BLHeli_S
• CNC aluminum alloy propeller guard
• Betaflight OSD support, easy to get RSSI, Voltage and other info from your goggles
• Adjustable FC settings via OSD
• Frsky version receiver supports both EU LBT and NON-EU Frsky transmitter
• Full telemetry function ready
• FPV Camera with adjustable angle
• F3 Flight Controller
• Runs on a 1S 450mAh lipo battery (not supplied)
Specs:
Wheelbase: 75mm
Size: 98.5x98.5x36mm
Flight Controller: F3 with OSD
MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000 (SPI connection)
Firmware: Betaflight_3.3.0_Crazybee
Motor: SE0703-19000KV Brushless
ESC: 5A (each) BLHeli_S with DShot600
Propeller: 40mm 3-Blade (CW and CCW)
Receiver: Frsky D8/D16 switchable with telemetry, Compatible both of Non-EU and EU LBT transmitter
Camera: 700TVL
Camera FOV: 120°
Video Format: NTSC
Video Transmitter Output power: 25mw
Frequency: 5.8GHz 6 bands 48 channels
With Raceband: 5474 5945 MHz
Weight: 28g (without battery)
Power cable connector: PH2.0
Includes:
1 x Snapper 7 Drone
1 x 40mm 3-blade propeller (2CW, 2CCW)
1 x USB Lipo/LIHV Charger
1 x Propeller disassemble tool
1 x Screwdriver
1 x Manual
Required:
Battery: 3.7V/3.8V (1S) 450mAh 30C-60C (PH2.0 connector)
4CH or higher Transmitter and Receiver
FPV Goggles or base station (optional)
Note: The included Frsky receiver is not compatible with the LBT EU D16 version firmware, it requires to be changed to the LBT EU D8 version to be compatible.
Registreer u om video's te uploaden aanmelden of registreren
Registreer u om beoordelingen te schrijven aanmelden of registreren
Aughra | Geverifieerde koper
-
Overall
-
Quality
-
Value
Nice little flier!
Jul 03, 2020
Dan | Geverifieerde koper
-
Overall
-
Quality
-
Value
Must have
Oct 22, 2019
Owen | Geverifieerde koper
-
Overall
-
Quality
-
Value
Good little starter drone for FPV
May 13, 2019
Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!
Accessoires
Special Price € 1,51
You save € 0,37
Was € 1,88
Special Price € 1,64
You save € 0,41
Was € 2,05
