New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Spartan AP-2000i - Advanced CCPM Mixer, Digital Cyclische Ring en Flight Stabilisator

Spartan AP-2000i - Advanced CCPM Mixer, Digital Cyclische Ring en Flight Stabilisator

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
Gewicht:
75 g
SKU:
SRC02000
WANT FREE SHIPPING? Click here to find out more!
 
De AP-2000i is een van de meest geavanceerde Aeromodelling elektronische producten die vandaag beschikbaar zijn. Het is ontworpen in het bijzonder voor gebruik in de schaal, flybar-minder en luchtfotografie helikopters. Op haar hart er drie verschillende apparaten allemaal gehuisvest in hetzelfde pakket. Elk van deze kan afzonderlijk worden in- of uitgeschakeld, afhankelijk van de behoeften van de gebruikers.
Geavanceerde Flight Stabiliser
De AP-2000i is ontworpen voor snelle model herstel en toch soepel hover met bijzondere aandacht voor de behoeften van luchtfotografie toepassingen.
Het ondersteunt zowel infrarood sensoren horizon en inertiaalsensoren. Neem dan contact met ons op voor meer informatie en beschikbaarheid van deze optionele accessoires. De beschikbaarheid en de prijs van de inertie sensor TBA.
Wanneer vlucht stabilisatie niet gewenst, kan deze functionaliteit volledig uitgeschakeld.
Digital Cyclische Ring
Ontwikkeld door Spartan RC de ¡§digital cyclische ring¡¨ technologie elimineert swashplate binding bij extreme diagonaal stok doorbuigingen.
Wij steunen ten zeerste het gebruik van de digitale cyclische ring, maar moet de klant liever niet te gebruiken, kan deze functionaliteit volledig arbeidsongeschikt zijn.
CCPM Mixer
De AP-2000i bevat een van de meest geavanceerde elektronische CCPM mixers, ontworpen met bijzondere aandacht voor de bijzondere behoeften van de omvang en de flybar-less helikopters.
Endpoint aanpassing, servo omkeren en digitale middelpunt trims voor alle vier servo's voor het bereiken van een optimale mechanische geometrie.
Tuimelschijf types: 120deg CCPM, 140deg CCPM, 90deg CCPM (4 servo). Mechanisch gemengde swashplates worden ook ondersteund.
Precision rotor fasering aanpassing. +/- 90 graden bereik, in stappen van 1 graad. Een essentieel wordt voor alle multiblads helikopters.

Algemene kenmerken:
Werkt met alle PCM, PPM / FM en Spread Spectrum ontvangers en ondersteunt zowel digitale als conventionele servo's.
Hardwarematige 1800 positie servo puls bemonstering en regeneratie voor superglad en jitter vrije bewegingen.
Maakt het gebruik van piëzo-gyros op cyclische voor het stabiliseren van multi-bladen en flybarless helikopters.
Eenvoudige configuratie van alle parameters via een eenvoudige LCD gebruikersinterface.
Apart aan te schaffen USB-interface maakt het herprogrammeren van de unit met nieuwe firmware versies beschikbaar op onze website. Deze universele interface werkt met alle bestaande en toekomstige Spartan RC producten.

specificaties:
Bedrijfsspanning: 4-10 volt, stroomverbruik Compact ontwerp maatregelen: 55mm x 36mm x 13mm
Gewicht: 25 gram
Operating voorwaarden: 0 tot 50 ° C, 32-122 ° F, 20-85% luchtvochtigheid, niet condenserend.
Opslag: -20 tot 70 ° C, -68 tot 158 ​​graden F, 20 tot 90% luchtvochtigheid, niet condenserend.
  • Sku SRC02000
  • Brand -
  • Capaciteit ( mAh ) -
  • Gewicht ( g) 75.00
  • Lengte 180.00
  • Breedte 15.00
  • Hoogte 125.00
  • Spartan Advanced CCPM Mixer
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

i had a co pilot 4 with all the other options, find it too complicated to set up, flymentor set yp fail due to driver problem, these things is small and simplier,does any 1 have a video for set up with the co-pilot sensor, ? can i set up without the computer?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i had a co pilot 4 with all the other options, find it too complicated to set up, flymentor set yp fail due to driver problem, these things is small and simplier,does any 1 have a video for set up with the co-pilot sensor, ? can i set up without the computer?

Works well, you may need an experienced person the test your heli and set up for you , but once its working it 's great . I have it on my gear switch so if i need to bale out i can flick the switch .

I had the old FMA co pilot and so i used my old infrared senor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works well, you may need an experienced person the test your heli and set up for you , but once its working it 's great . I have it on my gear switch so if i need to bale out i can flick the switch .

I had the old FMA co pilot and so i used my old infrared senor

This is a great piece of kit.. connect it upto an IR reciever and it will hold your Heli very well, I have been learning to fly helis for ages not having much time but this has helped me loads, some people here dont understand this unit and what it can do, It will run a flybarless head or multiblade setups and can be used with extra gyro's, It has good software for setup and the adjustments that can be made will make your heli fly very smooth, I have added a camera setup now and have some awsome video again using this unit, If you are new or beginner use the HK system as this is for pro's or get somebody who understands this to do the setup for you and you will be happy..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a great piece of kit.. connect it upto an IR reciever and it will hold your Heli very well, I have been learning to fly helis for ages not having much time but this has helped me loads, some people here dont understand this unit and what it can do, It will run a flybarless head or multiblade setups and can be used with extra gyro's, It has good software for setup and the adjustments that can be made will make your heli fly very smooth, I have added a camera setup now and have some awsome video again using this unit, If you are new or beginner use the HK system as this is for pro's or get somebody who understands this to do the setup for you and you will be happy..

This product works great on my Raptor 30. I am able to solo now at 95% gain. Makes the heli very stable and predictable. I will turn the gain down every weekend until I can fly with stabilization off. I had only solo'ed once before on a trainer cord. Today I flew 3 tanks alone. Well worth it. Fma sensor is very hard to find as the newest ones from fma are digital and wont work with this unit. Must be the old analog sensor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This product works great on my Raptor 30. I am able to solo now at 95% gain. Makes the heli very stable and predictable. I will turn the gain down every weekend until I can fly with stabilization off. I had only solo'ed once before on a trainer cord. Today I flew 3 tanks alone. Well worth it. Fma sensor is very hard to find as the newest ones from fma are digital and wont work with this unit. Must be the old analog sensor.

dovete essere piu' chiari nelle vendite e nelle spiegazioni dettagliate

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

dovete essere piu' chiari nelle vendite e nelle spiegazioni dettagliate

any body know if this product can be used to stabilize aircraft and if can be use to control aircraft how to install it



thank you

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

any body know if this product can be used to stabilize aircraft and if can be use to control aircraft how to install it



thank you

Excellent product at an excellent price, (same one is costing a whole lot more around here in the States),it will help stabilize your heli for AP jobs or aerial videography. Please beware that you will need to buy the FMA infrared sensor to use the stabilization feature, and the Spartan FMA sensor cable. The infrared sensor from FMA direct the sensor is like $45-$50 bucks, and you should have a complete stabilized system for way less money.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent product at an excellent price, (same one is costing a whole lot more around here in the States),it will help stabilize your heli for AP jobs or aerial videography. Please beware that you will need to buy the FMA infrared sensor to use the stabilization feature, and the Spartan FMA sensor cable. The infrared sensor from FMA direct the sensor is like $45-$50 bucks, and you should have a complete stabilized system for way less money.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!