Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global
  • USA

Spidex 220 FPV Drone Door Quaternium (KIT)

Spidex 220 FPV Drone Door Quaternium (KIT)

QTY:

Now save bewaar € 8,35 € 8,35

Special Price € 4,17 € 4,17

You save bewaar € 8,35 € 8,35

Was  € 12,52

Stock:
Gewicht:
165 g
SKU:
9171000701-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
esc
battery
motor
acc
Product
Omschrijving

De Spidex Micro 220 door Quaternium, is een compacte micro FPV quad dat het gebruik van de ruimte met een schone doelgerichte layout maximaliseert.

Ontworpen door Quaternium in eerste instantie als een 3D geprint snap samen quad is opgedaan in populariteit snel. De kleine 220mm wielbasis maakt dit Quad snel en behendig, maar er is een ruimte / pocket voor alles van een Mobius DIN-rail, Batterijsleuf, VTX wieg, en zelfs tot een 30mm FPV cam. Er zijn directe bevestigingspunten op het frame voor de 30.5mm FC en een baai voor de RX.

De kleine wielbasis is het niet beletten nog spinnen tot 5 inch rekwisieten en motoren tot 2204s kan worden geïnstalleerd door het wegknippen van de onderplaat. De snap samen constructie maakt dit in een handomdraai te togther te zetten en maakt crash reparatie net zo makkelijk.

De Spidex was te koud om alleen laten die met 3D-printers hebben al het plezier, dus we werkten met Quaternium deze Quad aan het publiek te brengen door het vormen van het.

Kenmerken:
• Snap samen bouw
• Montageposities voor al je spullen
• Compact 220mm wielbasis
• motor montage van 12 ~ 16 mm
• Duurzame glas gevuld kunststof geïnjecteerd

specs:
Wielbasis: 220mm
Gewicht: 95g

Aanbevolen setup:
Quanum 1806 motoren
Multistar 10a ESC
5 inch Gemfan Props
600mA ImmersionRC VTX
CC3D of Nase32 FC
Multistar 1400mAh Race spec batterij

Product
Specifications

Aanvullende Informatie

  • Sku:
    9171000701-0
  • Brand:
    Nee
  • Gewicht ( g)
    165.00
  • Lengte
    215.00
  • Breedte:
    25.00
  • Hoogte:
    180.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Great little frame for the price! It's kind of flexible, but hey, for the price it's good enough.
Quality
Value
Overall
Quality
Value
Overall
Quick build and the parts quality is very good. Light weight, should be durable but I haven't made any flights yet.

The most difficult part of assembly is adding the landing legs - very tight.

While 5" props might fit, it will be highly dependent on the motors you run. I installed DYS1804-2300kv's and there is very little clearance to the top of the prop. I think that some 1806 installations are going to have an issue due to the 2mm increase (nominal) in height; 220X motors might be a challenge as the sit 1/4" or so higher due to the flipped main plate necessary to accommodate the larger diameter bell.

I'm running bullnose 4" tri-blades which clear the framework nicely and should balance out the thrust loss due to the reduction in diameter. They do scream like a bag full of angry banshees, after all.

DYS1804/2300KV
KingKong 12a OPTO ESC (BL-Heli blue12 v14.4)
CC3D with Libre Pilot
Turnigy 1300MaH/25c
FlySky IA6 RX/TX
Quality
Value
Overall
Quality
Value
Overall
I bought this frame to do a budget build, and couldn't be more pleased with it's construction. The plastic is sturdy but forgiving and the kit was easy to assemble. Perfect for people like me who are just starting to build a race quad and know that they are probably going to crash a time or two. Pair it with a KK mini and a decent motor/esc setup and you're good to go.
Quality
Value
Overall
Quality
Value
Overall
It breaks into pieces every time I crash it. The pieces go back together fine, but they just don't join well enough. I suppose I could wiretie them at all the joints. I wound up giving up on it, but later used the base for a quad all by itself. It is great for that if you can figure out how to mount the FC and battery.
Quality
Value
Overall
Quality
Value
Overall
Much smaller than I thought, but it's a great frame. Had problem with getting the battery to fit in the slot provided. Ended up reversing the top part of the frame. Mobius slides perfectly into the battery slot, and a bigger battery fits in the old Mobius slot. Go figure! Have put a Sky 3 Quattro 4 x 12A ESC into the quad - mounting holes fit perfectly. Have selected a CC3D Atom FC, and have stacked this on top of the Sky 3 Quattro (another reason why I had to reverse the top frame). The motors are the same as in the video ... 4 x Quanum MT1806. The props are Gemfan 5030 which seems to provide the needed lift.
Quality
Value
Overall
Quality
Value
Overall
FANTASTIC frame, just received it and it looks really durable. The plastic looks like virgin plastic. It does have a bit of flex, but that is what will make it indestructible. This is one of the best frames HK has ever brought in the market.
Quality
Value
Overall
Quality
Value
Overall
plusplusplusottimo prodotto, comodi per la rapida estrazioneplusplusplusplusplusplus
Quality
Value
Overall
Quality
Value
Overall
Snaps together and has a spot for everything. I like how it helps tidy up a build by showing one where to put their equipment. Wish they had one in the 320 range.
Quality
Value
Overall
Upload
Videos
  • Spidex 220 FPV Quad Copter By Quaternium

  • Spidex 220 FPV Drone By Quaternium

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Spidex220_PDB.jpg download now [4324kb]
Wiring.jpg download now [4324kb]

Combine

essential items and
esc
battery
motor
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.