Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global

Sprint F3 Glasvezel Tunnel Hull borstelloze Racing Boot w / Motor (630mm)

Sprint F3 Glasvezel Tunnel Hull borstelloze Racing Boot w / Motor (630mm)

QTY:

Now save bewaar € 24,98 € 24,98

Special Price € 158,24 € 158,24

You save bewaar € 24,98 € 24,98

Was  € 183,22

Stock:
Gewicht:
2760 g
SKU:
9194000002

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Omschrijving

De Sprint F3 is het product van een aantal jaren van het ontwerp testen en ontwikkelen tot een zeer concurrerende, ras klaar Tunnel Hull die niet vereist dat de bouw van maak. De innovatieve buitenboordmotor setup wordt aangedreven door een hoog koppel borstelloze outrunner motor gekoppeld aan een directe aandrijving flex as, die de bevoegdheden van de prop.

De glasvezel werk is top, wat zorgt voor een gladde afwerking zonder gebreken. De verf en stickers zijn vakkundig aangebracht samen met een definitief glanzende blanke lak aan het oppervlak af te dichten. Het kleurenschema is helder, scherp en zeer gedetailleerd.

De prestaties zijn echt wat de Sprint F3 is alles over. De vooraf geïnstalleerde 3000KV borstelloze outrunner motor zorgt voor enorme hoeveelheden van de macht aan de prop. De buitenboordmotor setup komt als een complete eenheid die gewoon bouten aan de romp waardoor snelle montage / demontage. Waterkoeling is vooraf geïnstalleerd.

Een batterij montageplaat is vooraf geïnstalleerd en een servo mount. De servo bouten eenvoudig in plaats maken voor een zeer eenvoudige, veilige installatie. De accubak is groot en zal plaats bieden aan een breed scala van verpakkingen.

Kenmerken:
• Mooi afgewerkt fiberglas romp
• Innovatief buitenboordmotor ontwerp
• Authentiek ras geïnspireerd kleurstelling
• Krachtige 3000KV borstelloze motor outrunner
• In staat om extreme snelheden
• Top kwaliteit hardware inbegrepen

specs:
Hull Lengte: 630mm
Breedte: 295mm
Lengte: 150mm
Motor: 3000KV borstelloze outrunner (vooraf geïnstalleerd)

vereist:
60 ~ 90A borstelloze watergekoelde ESC
Standaard grootte 3kg + servo
2CH zender en ontvanger
3S 2200 ~ 3000mAh batterij LiPoly

Product
Specifications

Aanvullende Informatie

  • Sku:
    9194000002
  • Brand:
    Nee
  • Gewicht ( g)
    2760.00
  • Lengte
    705.00
  • Breedte:
    195.00
  • Hoogte:
    330.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Nicely moulded hull with a great high gloss finish. A good looking boat. However, be warned,
the steel shaft seized in the "brass" bush locking up the propeller after 30 secs running.
This caused the motor to burn out. There was no sign of oil or grease anywhere inside the outboard assembly, very poor quality control. Hobby king would not entertain my complaint unless I submitted a video. Of a seized outboard motor, really !!.
A replacement motor (scorpion) and upgraded shaft and bush from TFL Germany solved the issue at great cost. The boat performs beautifully now, but this has been a very expensive exercise. If you purchase this boat, before you do anything, strip the outboard and grease/oil the solid and flexi shaft.
Quality
Value
Overall
Quality
Value
Overall
Vraiment une magnifique coque :)
Premier run en 4S 5500mA avec un ESC Hobbyking 90A, a trace dj pas mal et suffisamment pour le retourner.
Quality
Value
Overall
Quality
Value
Overall
This boat is much nicer than I expected. The outboard system is amazingly machined and detailed. The only problem I've run into so far is the motor wire insulation wore away and the salt water I'm running in shorted the motor and burnt it up. It's pretty quick out of the box. I've upgraded to the turnigy hk 2865 -2900kv on 4s w 160A aquastar spinning a 335-3 prop. Patiently waiting for the right conditions to test this setup. I'll will let you all know. Overall, great value.
Quality
Value
Overall
Quality
Value
Overall
I grabbed this boat when it was on sale for $140 aus.
installed a 120amp hobbyking esc and I use a turnigy 4s 4000mah 40c lipo.
the boat has done about 6 packs of run time and it works very well, checked it on the gps and it pulled a run of 71kph, great hull im very happy with it. motor temp was around 35c and esc was 45c with the lipo also at 45c.
Quality
Value
Overall
Quality
Value
Overall
When I unboxed mine there were screws and hardware loose in both the box and hull, luckily I could find everything. Where the hatch connects to the nose is a joke, it requires modifications before running. Instruction manual is next to useless, doesn't even tell you how to grease the outboard. Also nothing is properly sealed at the back. However this boat handles speed runs like it i on rails, on 3s it is pretty fast and on 4s it is insane. I run with my prop angled down slightly on 3s and a bit further down for 4s. I had a shaky start with this boat, but now I love it, it is my go to RC at the moment. I have heaps of youtube vids, and a discussion thread on RCgroups, look me up, ValiantGLX
Quality
Value
Overall
Quality
Value
Overall
Looks really nice. Unfortunately UK seems not to be part of EU for some, as I needed to send it with a help of friends.
Quality
Value
Overall
Quality
Value
Overall
I have had some time now with this boat and am extremely pleased with the overall package. Finish on this is next to none, beautiful. Lots of room inside for a 24" hull as the motor is obviously on the back. Have upgraded to a Turnigy Typhoon 3450 running twin 5800 Nano tech packs for a total of 4S to the motor. Also upgraded the prop to a CNC 32mm x 1.7. Getting about 10 mins run time and a maximum speed of 48mph with the mods. Batteries need to be as far forward as possible and drive needs to be trimmed so it is slightly down. Remove the drive shaft and grease after every run, also add a few drops of oil to the oil fitting as this keeps the strut bushing lubricated. This is one fast well built boat.
Quality
Value
Overall
Quality
Value
Overall
Great boat. Run well the very first time. It only needs just a few minor tweaks otherwise well worth the money
Quality
Value
Overall
Quality
Value
Overall
Got this boat and a turnigy 120a into the uk for 209 gbp landed,it's got a stunning hull which is of very good quality and all the hardware is great too. It's really easy to get ready for the water, took about an hour and a half. I'm running 4500mah turnigy packs in it and she flies and definitely needs the pack put right up front to keep the nose down..
Quality
Value
Overall
Quality
Value
Overall
Great boat, handles very well at high speed, just ensure the battery is right up front and outboard is slightly tilted down d
Quality
Value
Overall
View all reviews
Upload
Videos
  • Race Boat

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.