Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

SU-26 Gas 50cc 2260mm (ARF)

SU-26 Gas 50cc 2260mm (ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
11809 g
SKU:
SU-2650CC
Product
Omschrijving

Dit schitterende SU26 is een top kwaliteit 3D-gas-model dat zelfs de meest kieskeurige RC piloot trots te bezitten en vliegen zou zijn!

Het lichtgewicht toestel is prachtig ontworpen en gebouwd, de uitstekende kwaliteit bekleding is vakkundig toegepast en de kap en het wiel broek afgewerkt in een rijke, diepe glans verf. Geen compromis om de kwaliteit is gemaakt op deze prachtige 3D-schaalmodel, het onderstel en staartwiel zijn CF, net als zowel de hoofdvleugel buis en horizontale stabilisator buis. CF controle hoorns en servo extensies worden geleverd en alle pushrods zijn van topkwaliteit spanschroef / ball-verbinding rondom, de enorme roer pull / pull bediend zoals je zou verwachten. Als je kijkt rond deze fantastisch uitziende Sukhoi, de aandacht voor detail is echt indrukwekkend, bijvoorbeeld, is de kap correct gemonteerd op anti-vibratie rubbers, is er een holte en mounts voor een goede uitlaat, en ga zo maar door. Vanuit oogpunt van uitvoerbaarheid, zowel de vleugels en horizontale steek zijn plug in en de gemakkelijke toegang luik geeft bijna onbeperkte toegang voor een eenvoudige veld assemblage en onderhoud.

Er is geen twijfel, dit prachtige model is een zeer capabele 3D performer die indruk in alle opzichten eens uitgerust met een van onze indrukwekkend goedkope 50cc gasmotoren, deze slechte jongen zal u het soort vlucht prestaties te geven dat alleen een gigantische schaal gas model kan aanbieden!

Kenmerken:
Superb, hoge kwaliteit Bouw
Uitstekende Pre-Applied Covering
Topkwaliteit Hardware Package
Geleverd Engine Mount Templates
Uitgebreid gebruik van CF, inclusief onderwagen & Tail Wheel Bracket
Alle stuurvlakken Ball-Linked
Uitstekende Schaal kleurenschema, ideaal voor Orientation
Massive kap is ideaal voor Neat Engine Installatie
Cavity & Mounts voor Tuned Muffler

specs:
Spanwijdte: 2260mm
Lengte: 2208mm
Flying Gewicht: 6000g
Wing Gebied: 93dm2

vereist:
6-kanaals TX / RX
50cc ~ 55cc Gas Engine
5 x MG Digital High Torque 60g Servo + 1 x Fast MG Digital Throttle Servo
UBEC of Regulator
RX & Ignition LiPoly Battery

Product
Specifications

Aanvullende Informatie

  • Sku:
    SU-2650CC
  • Brand:
    Nvt
  • Gewicht ( g)
    11809.00
  • Lengte
    1700.00
  • Breedte:
    310.00
  • Hoogte:
    691.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
schner Flieger gute Passgenauigkeit und gute Holzqualitt leider sehr schlechte Ruderschaniere die bei der kleinsten Belastung brechen also nicht verwenden.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This was my first 50cc model, bought last year but only recently got round to building it. I thought the kit was generally very good quality - specially when you look at the price! I fitted a DLE55 with cannister exhaust, but there was a snag. Most cannisters seem to be 65mm diam but there's only room for up to 55mm in the fuselage, so I couldn't use the one I'd already bought elsewhere (Ebay). I bought the HK one and it fitted perfectly.

Maidened it last week and flew again yesterday. Fab, smooth yet very responsive. There may be the slightest thrust-line issue - it tends to nose up very slightly when throttled right back and I needed to feed in a touch of down on approach. Perfect 3-point landings are a doddle!

Power:weight is great. It prop hangs at about 1/3 throttle and goes vertical from there very easily when I apply full power. Great rudder/elevator response.

Very pleased with the plane.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Overall, great airframe! And most importantly, a great price! My kit was missing a few hinges, no big deal, i ordered some more. The undercarriage is a f****ing pain to bolt on, there is a whole under the firewall to accommodate a canister muffler which will come in handy! Overall Im please with it! Thanks a lot HK! :D
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mine came 3 working days after ordered, with a little damage by the way. I must confess, it's a very well built model with excellent hardware. The cowl is a little disfigured and my covering was professionally done. The servo extension horns are short so I had to get longer ones. It was a straight forward build for me with a RCG50 installed and a Zimmerman canister. I installed my batteries on the inside of the engine box and the cg was perfect from the wrong tube. Maiden tomorrow!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mine now has at least 100 flights on her. After what seemed like an eternity to get the cg right it flys very true. Plane has no bad tendencies and can do anything that the pilot is capable of doing. Have a DLE55 on mine. I would recommend this plane.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a super nice plane with reliable landing struts being carbon fiber and low wing loading compared to other planes this size available here at HK , I'm elect power 50c with mosnter 200 and get 5-7 minutes with a 4500 10 cell batteries. Hang snap rolls 3d rolls spins ect plane rights itself every time . Excellent value.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Schaut ihr das mal an.

http://www.youtube.com/watch?v=63qdPqfVFU8 Jet
zt


nach ca. 70 Fluge lst sich die Folie, besonders die rote und schwarze Folie, nach Bgeln nutzt auch nicht. Schade dass am Bespannung gespart hat, dieser Flieger hat Oracover Folie verdient.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hallo, ich habe den Flieger im Dezember Bestellt, ein Tag spter kam er mit GLS.
Ich habe den Karton auf gemacht, konnte nicht glauben dass man aus China so ein toller Flieger fr so wenig Geld bekommen kann. Ein feines teil, sehr hochwertig, sauber bespannt, keine Falten. Ich habe ein DLE 50 ccm eingebaut mit krumscheid Schalldmpfer. Der flieger hat tolle Flugeigenschaften, (alles was man sich wnscht ). Jetzt nach ca. 70 Fluge lst sich die Folie, besonders die rote und schwarze Folie, nach Bgeln nutzt auch nicht. Schade dass am Bespannung gespart hat, dieser Flieger hat Oracover Folie verdient.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
What a nice flyer. But what a poor and weak LG attachment. Check out the thread on flyinggiants for details how it fails and how to re-build. I dad an electric conversion, a Rotomax 50cc on 2x 5S5800 Zippies (10s total) swinging a Xoar 25x12. Crazy power.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice airplane in first view. Possible I'm unlucky....,but during assembling revealed fundamental troubles. Can be seen in the subsequent repairs. In the fuselage strong torsion in different directions.The tail-plane more than one cm different twisted.The cabin is more than 1,5 cm,the komplete engine support bracket more than 5 degree to left!!!! This is first production losses from Hobbyking poducts,but this is very...

verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Turnigy SU-26

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.