New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Super Bright 3 Watt Groene LED Lamp met Aluminium Heatsink

Super Bright 3 Watt Groene LED Lamp met Aluminium Heatsink

Discontinued Product

Please continue searching for a similar product.
Gewicht:
6 g
SKU:
371000043
WANT FREE SHIPPING? Click here to find out more!
Deze Super Bright 3 Watt Groene LED komt gemonteerd op een aluminium heatsink en is vooraf bekabeld met een JR-connector.
Perfect voor 's nachts vliegen!
spec:
Input: 2,5-3 volt
Kleur: Groen
Helderheid: 70-80 Lumens
Diameter: 20mm
Gewicht: 4g
  • Sku 371000043
  • Brand HobbyKing
  • Capaciteit ( mAh ) -
  • Gewicht ( g) 6.00
  • Lengte 30.00
  • Breedte 20.00
  • Hoogte 30.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Really super bright led. Tried with a 1S LiPo and still works! Less heat and proper use under 3V using a resistor. Not tried the amp, but with 3V thera is no heat. Impressed!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really super bright led. Tried with a 1S LiPo and still works! Less heat and proper use under 3V using a resistor. Not tried the amp, but with 3V thera is no heat. Impressed!

Good Value!

Only 3 stars for the disappointing soldering quality, otherwise it's a very good buy.
I operate these wired to the 5V arduino output with a 51 Ohm resistor in series (must not take more juice from the APM) and they are still bright enough to be seen clearly in broad daylight.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good Value!

Only 3 stars for the disappointing soldering quality, otherwise it's a very good buy.
I operate these wired to the 5V arduino output with a 51 Ohm resistor in series (must not take more juice from the APM) and they are still bright enough to be seen clearly in broad daylight.

monte en bout de bras sur un quadri elles marchent nickel !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

monte en bout de bras sur un quadri elles marchent nickel !

turned my whole room green with 3 volts. VERY IMPRESSES!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

turned my whole room green with 3 volts. VERY IMPRESSES!!

good result in green LEDs, a resistor 41 ohms / 3 watts and then with 3S betreiben.bei red there is a resistor52 ohms and 3watt. then the LES are perfect
Super to see in the evening and at night. even during the day very good for orienting the copter. but use it only for night flights

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good result in green LEDs, a resistor 41 ohms / 3 watts and then with 3S betreiben.bei red there is a resistor52 ohms and 3watt. then the LES are perfect
Super to see in the evening and at night. even during the day very good for orienting the copter. but use it only for night flights

Necesaria para la buena Para la Buena instalacin.







verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Necesaria para la buena Para la Buena instalacin.







Wow these are really bright. I ran them off 5v to see what happens and they are unbearably bright, the heat sink starts to get really hot and the light turns off, for me it started again when it cooled down. I think it may be ok on 5v if there is a cool exposed wind but static is too hot.
I reckon 3v is easily enough as per specification.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Wow these are really bright. I ran them off 5v to see what happens and they are unbearably bright, the heat sink starts to get really hot and the light turns off, for me it started again when it cooled down. I think it may be ok on 5v if there is a cool exposed wind but static is too hot.
I reckon 3v is easily enough as per specification.

Solder two LEDS together in series and you can run off 5v or 6v BEC. Works good!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Solder two LEDS together in series and you can run off 5v or 6v BEC. Works good!

These are good when run of a 1 S pack. 4v is ideal. However, string three of them in stores and they work will off A 3S pack. Note that the different colors don't all give the same output in terms of brightness at the same voltage, so red red blue will be different than red red red.... They also get warm to the touch when powered by 4 V....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These are good when run of a 1 S pack. 4v is ideal. However, string three of them in stores and they work will off A 3S pack. Note that the different colors don't all give the same output in terms of brightness at the same voltage, so red red blue will be different than red red red.... They also get warm to the touch when powered by 4 V....

Ottimo led , con ottima potenza , ad un prezzo mooolto basso.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ottimo led , con ottima potenza , ad un prezzo mooolto basso.

  1. 1
  2. 2
  3. 3
  4. 4
Customer files
No File Name Download [4859]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!