Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren

Super Bright 3 Watt witte LED Lamp met Aluminium Heatsink

Super Bright 3 Watt witte LED Lamp met Aluminium Heatsink

Now save bewaar € 0,00 € 0,00

€ 1,12
Uit voorraad!
Stock:
OUT OF STOCK
Gewicht:
6 g
SKU:
371000040

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Omschrijving
Deze Super Bright 3 watt witte led komt gemonteerd op een aluminium heatsink en is vooraf bekabeld met een JR-connector.

Perfect voor 's nachts vliegen!

spec:
Input: 2,5-3 volt
Kleur: White
Helderheid: 70-80 Lumens
Diameter: 20mm
Gewicht: 4g
Product
Specifications

Aanvullende Informatie

  • Sku:
    371000040
  • Brand:
    Nee
  • Gewicht ( g)
    6.00
  • Lengte
    30.00
  • Breedte:
    20.00
  • Hoogte:
    30.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Great price, very bright for about 5 minutes until I let the smoke out of them lol. My fault, I'm running 3w red led strip along the bottom of my nighthawk build and 2 of these mounted at the bottom front for headlights. I bought them a while back and finally decided to install them. They don't like 12v LOL, totally my fault. Probably buy some more and step down to 3v like stated.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
2.5 volts max as they get very hot on higher voltage. Much brighter than the strip LEDs of 12v.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought two, blew one up carelessly by putting it on the same circuit as my 12V strip lights, the other one is going strong. Maybe I got an especially good one, but this LED withstands 5V without issue (it does get hot to the touch, though).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I put three in parallel and hooked them up to a 3S they put out an instense light, i am yet to run them long term but its on the project list
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Does not come with connector. Fairly big for what I wanted. Probably would be ok with a different setup. Just not for me.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
indeed this is a light , very impractible being 3.6max volts
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
un beau petit phare d'attero pas trop gros
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Using with 10 ohm resistor on 12v supply as headlight for my ebike. This LED puts out quite a bit of light! It's about the same as my motorcycle's low beam. I'm going to add a couple more later on for extra light. Note that you'll need a bigger heatsink to go above 1 1/2 watts. I pulled one off the northbridge chip on a dead motherboard and used thermal compound mixed with epoxy in a very thin layer to glue it on. Using my IR temp gun the LED is only a couple degrees above the heatsink after 5 minutes so the thermal conductivity is good.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very bright little light, have it hooked up to 2x 1.5v AA's. Great landing light or navigation light.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Easy to use bright led, wires is about 10 cm long 1,5 cm connector. it gets warm from 3,3 volts but it not burn hands when you hold it.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • RGB LED Boards & Strips

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.