Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

SuperLight Edge 540EP 3D Kit

SuperLight Edge 540EP 3D Kit

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
2379 g
SKU:
EDGE-540EP

Combine

essential items and
esc
battery
servo
Product
Omschrijving

De SuperLight Edge 540EP is zoals de naam al doet vermoeden, zeer licht!

Gebouwd van balsa en laser gesneden ply met een glasvezel kap en het wiel slobkousen, het is zeer licht van gewicht en met 15 mm diameter Carbon Fiber steunstaafje, zeer stijf. Combineer dit met de grote stuurvlakken en u kunt begrijpen hoe goed het gaat presteren op 3D. Landing stutten zijn ook Carbon Fiber en het luik releases gemakkelijk om snelle toegang tot de batterij en servo's mogelijk te maken.

Dit is een fantastische 3D-model dat is gemakkelijk op te zetten en te werken aan op het veld. Als u een ervaren 3D-piloot vindt u de lenigheid, kracht en lichtheid van dit vlak te waarderen. Het zal een 3D-manoeuvre u gooien op het uit te voeren.

Spec.
Wing Span: 48.8in (1240mm)
Vleugeloppervlak: 30sq.dm
Lengte: 48in (1220mm)
Flying gewicht: 1200g
Radio Vereiste: 4Ch
Servo: 4 x 9g (Verplicht)
ESC: 60A (Verplicht)
Motor: 35xx 42xx Series om borstelloze Outrunner (Verplicht)
Batterij: 3000mAh 3S ~ 4s (Verplicht)

Product
Specifications

Aanvullende Informatie

  • Sku:
    EDGE-540EP
  • Brand:
    Nvt
  • Capaciteit ( mAh )
    Nee
  • Gewicht ( g)
    2379.00
  • Lengte:
    920.00
  • Breedte:
    175.00
  • Hoogte
    355.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
With the given CG of 100mm this model is not to fly !!!
CG is about 85mm. With this setting it flies wonderfully.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
acabo de recibir este avion , es impresionante ,super bonito, estoy deseando hecharlo a volar , al avion le doy 5 estrellas , cuando lo ponga en vuelo ya os contar ,un saludo a todos lo recomiendo ...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
fliegt super mit Dreiblattluftschraube. Luft so ganz ruhig und leise.
Aber die Fahrwerksaufhngung ist der grte Schrott aller Zeiten.
Bei 3 Landungen ist 3 mal das Fahwerk abgegangen. Ich habe jedes mal noch mehr verstrkt, aber so langsam bin ich ratlos.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Look I have to give this plane top marks I orderd it, it arrived within 5 days douple packed and it went together perfctly (the green metalic colour as in the photo is not correct ) I flew it with a 42-40 3,800 3 cell turnigy and she flew super untill I of course smashed it into the ground

and into thousand pieces, so what did I do ....I bought another one at this price I just had to......... now back to the drawing board and learn how to fly and not hit the ground lets face it the earth a biiig thing

PB
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Below average construction and finish. Cheapest quality balsa you could find. If you expect a nice metalic green covering you'll be dissapointed. It's a crappy light aqua-green. Right stabiliser half broke off in the air on first fight while flying level at half throttle. I managed to land it, repaired it and got it flying again two days later. Very average flying characteristics. Requires lots of computer mixing to get it to fly decent. Not worth the trouble.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Cannot complain about this plane at all. Only started flying this year and this thing can be babied around by noobs or pushed by experienced flyers. Setup is Turnigy G25, Plush 55A ESC, 13X8 Turnigy beech wood prop and Corona 939 servos on ailerons and 929's on the elevator/rudder. Pull pull rudder was a bit fiddly as was first build attempt. Everything was square right out of the box. No modifications needed for motor mount, fits perfectly under the cowl.
CoG was set right under the carbon fibre wing spar.. flights great for me using the 2200maH battery, getting around 6-8 mins flight. In this configuration its 1240 grams on the button. Glides forever, will tool along at 1/3 throttle. If I totalled it tomorrow, I would buy another with my iphone there and then!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very impressive plane only let down by the weak mounting setup for the carbon undercarriage legs. (hence the 4 star rating) One narrow strip of ply for a mounting base plate will never hold up. My gear tore off on the second landing which was not a very hard touch down. A bit annoying as it will have to be beefed up considerably & the incident also tore off a big section of the Oracote film from the bottom of the fuse. Apart from that it flew like it was on rails with stacks of power using an NTM 3548 900kv Prop drive swinging a 13 x 6.5 APC Prop on a 2200 4S Turnigy. A great sport plane which will also do all the 3d stuff with relative ease.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Sehr lange Wartezeit. Es wurde dann noch das falsche Modell geliefert und dies musste ich auf meine Kosten wieder zurck schicken. Modell ansonsten okay. Wenn es einmal klappt, dass die Lieferzeit stimmt, Ware geliefert wird, die in Ordnung ist und noch die richtige Ware geliefert wir, dann kann man nicht meckern. Aber, ob sich dies lohnt um einen gewissen Preisvorteil zu haben??? Bei Reklamationen bentigen man viel Ausdauer und Zeit !!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great plane. Lack of destructions please, are you kidding.

Here they are.

Glue tail plane surfaces into fuse make sure they are straight before glue sets.

Glue in all the bits that wobble and make plane go where you want it to go.

Screw in servos(hard word wikipedia has a description and some pics for those that don't know)

Fix the wobbly bit to the servos with the rod things from the box. And the wire bit to for the rudder(not the one for rc boats the plane type)

Screw on the heavy metal thing with three wires coming out if it on the front is the best place i've found on this one.

Attach the plastic or wooden spinie thing the your fingers or face should stay away from.

Attach that other thing that gets hot and makes the metal thing go beep when you plug in a battery.

Put the little box with the wire hanging out inside plane.

Plug in battery and fly the usual way.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice flyer and very good finish and a beautiful plane. Really enjoy flying this and it is my favourite model . However the body is very weak and flimsy and needed a lot of plywood reinforcing generally and especially in landing gear attachment, It is very smart to do this before breaking the fragile body and messing up the looks. I have exchanged landing gear for pianowire gear for softer spring effect. I have added 100 gram of epoxy and 1 to 3 mm plywood to body weight . Setup T4240/1300 11x7 prop 60 A ESC. Battery used 4400 3s or 2000 4s .

Draws a lot of juice. the 2000 25C nanotech gets very warm
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • SuperLight Edge 540EP 3D Kit

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
No File Name download now [368kb]
No File Name download now [362kb]
Superlight Edge 540 - Carbon reinforceme download now [80kb]
Superlight Edge 540 - Carbon reinforceme download now [72kb]
AdrenaCo Edge5 download now [162kb]
AdrenaCo Edge1 download now [129kb]
AdrenaCo Edge2 download now [135kb]
AdrenaCo Edge3 download now [120kb]
AdrenaCo Edge4 download now [115kb]
AdrenaCo Edge6 download now [81kb]
AdrenaCo Edge7 download now [136kb]
AdrenaCo Edge8 download now [180kb]
AdrenaCo Edge9 download now [97kb]
Edge complet download now [236kb]
Edges setup 1 download now [236kb]
Edge setup 2 download now [264kb]
Superligth Edge 540 - Reinforcement of g download now [72kb]
Superligth Edge 540 - Reinforcement of g download now [80kb]
No File Name download now [1322kb]
AdrenaCo Edge6 download now [81kb]
AdrenaCo Edge7 download now [136kb]
AdrenaCo Edge8 download now [180kb]
AdrenaCo Edge9 download now [97kb]
AdrenaCo Edge1 download now [129kb]
AdrenaCo Edge2 download now [135kb]
AdrenaCo Edge9 download now [97kb]
AdrenaCo Edge9+ download now [97kb]
AdrenaCo Edge3 download now [120kb]
AdrenaCo Edge4 download now [115kb]
AdrenaCo Edge5 download now [162kb]
AdrenaCo Edge6 download now [81kb]
AdrenaCo Edge7 download now [136kb]
AdrenaCo Edge8 download now [180kb]
AdrenaCo Edge1 download now [129kb]
AdrenaCo Edge2 download now [135kb]
AdrenaCo Edge3 download now [120kb]
AdrenaCo Edge4 download now [115kb]
AdrenaCo Edge5 download now [162kb]
EDGE irgendwas ausgefallen download now [3429kb]
Bauanleitung download now [1322kb]
HK manual EDGE-540 EP download now [1322kb]
Edge540 Prop Hang download now [9kb]

Combine

essential items and
esc
battery
servo

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.