Leverancier worden Blog Nieuwe items

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

T5682 Turnigy Pro Comp borstelloze Inrunner Motor 1700kv

Generating Links

T5682 Turnigy Pro Comp borstelloze Inrunner Motor 1700kv


Now save bespaar € 0,00 € 0,00

€ 66,39
Al gekocht Discontinued Product

Please continue searching for a similar product.
Geen verzendkosten? Klik hier meer leren!

Als je serieus stroom nodig heeft voor uw grootschalige perfomance boot of 1/5 schaal RC auto, kijk dan niet verder dan het Turnigy Pro Comp serie inrunners. Deze prachtig ontworpen motoren bieden een hoge kwaliteit, ultra high performance en betrouwbaarheid. De motor is opnieuw bebouwbare en is voorzien van afneembare eindkappen, de motoras heeft een bewerkt vlak en is 8 mm in diameter tot het uiterste torque geproduceerd door dit monster van een motor te behandelen!

Maat: 56x82mm
Kv: 1700rpm / v
LiPoly Cellen: 6s
Max Efficiency: 4800W
Stroom bij Max Efficiency: 180A
Max Current (10s): 265A
Onbelast Current: 4.4A
Internal Resistance: 0,0038
Shaft: 8mm
Gewicht: 690g

  • Kv ( tpm / v ) 1700.00
  • Max Currents (A ) 265.00
  • Resistance ( mh ) 0.00
  • Max Voltage ( V ) 25.00
  • Vermogen ( W) 4800.00
  • Shaft A ( mm ) 8.00
  • Lengte B ( mm ) 82.00
  • Can Diameter C ( mm ) 56.00
  • Kan Lengte D ( mm ) 74.00
  • Totale lengte E ( mm ) 106.00

Dimension Diagram Guide

  • attributeset-10


Upload video

Registreer u om video's te uploaden aanmelden of registreren

Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:

Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:

Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

straton | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Apr 16, 2012

I had a minor problem with one of the wires. Shrinking tube was not double as on other two, and after heating it, to change stock connectors, was cut a few centimeters due to heat. Then motor was tested under a load at 180A at 6s with a lot of cooling air. Rpm was 26K. After 4 min of almost full throttle smoke started coming out of the motor and I could here a "screatching noise". I stopped motor and thought the bearings were shot. Well, something worst had happened.The spindle/rotor of the motor holds the magnets together with a bit of blue epoxy(2 drops each only!!!) and a thin film of I guess, polyamide". Magnets had broken both epoxy and film and touching inside of motor. Final result 2 of them were badly scratched. Now I need to re-glue them with a very good epoxy hopefully, and balance the whole thing. That means a lot of work...

jeffrey | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Mar 30, 2012

This is a Great Motor,and for the price you can't beat it. I have been running it in my 42' Mono now for 2 mounths every day,(5s 40c Batts) and no problems.This motor would also work great in a 1/5 scale truck or buggy.Awsome power,around 6 Horse Power,Instant throttle response.Will buy more as soon as they come back in stock.(hope they get more).Would recommend this motor for anyone needing massive power.

Eric | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Feb 19, 2012

Wow... I fired up this bad-boy today for a quick test free-holding it. It spins up to max speed instantly with no load. Running at max speed It is incredibly smooth. Someone took the time to do a high quality build here and custom balanced the internal shaft and magnets.

What an impressive motor. This is beyond belief.

grsboats | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Feb 17, 2012

Just got my hands on this big block and what I can say its a tremendous powerhouse to be used on 1 meter cat.Would like to know what is the best esc to connect to this beast?

Michael | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jan 04, 2012

Wow! What a monster! It is definatly a TP Power Motor- Parts inside and Cables from the same manufactor. More Power then the Leopard 5682! Using this Motor in a 1/5 Redcat Rampage XBe- Insane Power!
This is a powerful High Quality Motor with incredible Torque.
4 Pole 18 Slot. Super Low Price!!! Buy, Buy, Buy!!!

5682 Motor mount Download [53]
5682 Motor mount Download [62]
vanquish2 Download [907]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!