Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

T5692 Turnigy Pro Comp borstelloze Inrunner Motor 1320kv

Generating Links

T5692 Turnigy Pro Comp borstelloze Inrunner Motor 1320kv


Now save bespaar € 0,00 € 0,00

€ 74,78
Al gekocht Discontinued Product

Please continue searching for a similar product.
Geen verzendkosten? Klik hier meer leren!

Als je serieus stroom nodig heeft voor uw grootschalige perfomance boot of 1/5 schaal RC auto, kijk dan niet verder dan het Turnigy Pro Comp serie inrunners. Deze prachtig ontworpen motoren bieden een hoge kwaliteit, ultra high performance en betrouwbaarheid. De motor is opnieuw bebouwbare en is voorzien van afneembare eindkappen, de motoras heeft een bewerkt vlak en is 8 mm in diameter tot het uiterste torque geproduceerd door dit monster van een motor te behandelen!

Maat: 56x92mm
Kv: 1320rpm / v
Maximum Voltage: 30v
LiPoly Cellen: 8s
Max Efficiency: 6000W
Stroom bij Max Efficiency: 190A
Max Current (10s): 375A
Onbelast Current: 4.2A
Internal Resistance: 0.0043
Shaft: 8mm
Gewicht: 813g

  • Kv ( tpm / v ) 1320.00
  • Max Currents (A ) 375.00
  • Resistance ( mh ) 0.00
  • Max Voltage ( V ) 30.00
  • Vermogen ( W) 6000.00
  • Shaft A ( mm ) 8.00
  • Lengte B ( mm ) 92.00
  • Can Diameter C ( mm ) 56.00
  • Kan Lengte D ( mm ) 84.00
  • Totale lengte E ( mm ) 116.00

Dimension Diagram Guide

  • attributeset-10


Upload video

Registreer u om video's te uploaden aanmelden of registreren

Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:

Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:

Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

TwirlyWhirly555 | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Feb 17, 2012

BIG MOTOR , this motor is huge , running on a 150A controller , lowest speed current draw at 15 volts is just above 1 amp , max speed on 15 volts , current is just above 5.8 amps both readings on unloaded motor , great quallity , but better sleving over 3 main wires could be better , as one has split on mine , but i will replace it :)

znus_ | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jan 31, 2012

Running on 8s (esc is the Turnigy AquaStar 240A HV) in a 45" hull. The thing is scary!

terry | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Jan 23, 2012

this would go nice behind the hobbyking jet drive for large boats
oh yeah bring it on , 1/4 scale jet boats

zeeek1 | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Dec 24, 2011

All I can say is Wow! I wish it wasn;t winter and I could slip this bad boy into my 40" mono to test.

Definately NOT a leopard clone. Different core & windings 4 SURE!!

I haven't recieve my TP power motor yet to compare construction. I will follow up.

This motor has 16 steps as per other poster on this brand as opposed to 12 steps for leopard motors.

For once i am stumped as to who makes these?? Or which brand it is derived from unles HK actually did request a factory to make their own vrand.

I will have to consult some other motor GURU's to see if this is a 4, 6 or even an 8 pole like a Neu 2210.

Core resembles a Neu or Aqua craft UL1 motor in that looking from the outside in, it looks incased. Maybe I will take it apart but, I don't really want to at this time.

WIres that exit the rear vent holes should IMO be better insulated with lots more heat shrink or Med. to large size silicone fuel tubing. 4mm ID require and rear vent holes are approx. 9mm in diamter.

I wish they would tell us how many poles it is so I don;t fry an esc on testing!!!! LOL, will use cheapy esc on bench I guess.

More to come ! Merry X-mas!!!

Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!