Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Tarot 680Pro HexaCopter Vouwonderstel 3K Carbon (KIT)

Generating Links

Tarot 680Pro HexaCopter Vouwonderstel 3K Carbon (KIT)

Prijs:

Now save bespaar € 0,00 € 0,00

€ 115,62
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
297000036-0
Geen verzendkosten? Klik hier meer leren!

Tarot voegt de nieuwe PRO680 de populaire 680-serie van HexaCopter frames. De nieuwe 680Pro is geoptimaliseerd met een grotere beschikbare ruimte voor apparatuur en opnieuw vouwen geometrie waardoor het nog gemakkelijker. Dit ontwerp heeft een lager zwaartepunt en is stabieler met een sterkere visuele impact.

De PRO680 heeft een hoge sterkte matte goud verwerkt composite PCB-aansluitingen, waardoor het efficiënter en het toevoegen van veiligheid. De 16mm 3K holle pure carbon fiber buis is alle CNC-bewerking, waardoor het sterker en lichter dan de aluminium versie. De carbon arm's klapstoelen werden verbreed en 3-punts ondersteuning verbeterd om te voorkomen dat kraken en te breken met een betere opgesloten in voelen.

De nieuwe carbon buis hardware set is gemaakt van geïmporteerde vezelversterkt nylon materiaal. De nieuwe opvouwbare bipod design en veiligheidssloten worden verbeterd om te voorkomen dat de botskrachten van schade aan de structuur. De Pro680 heeft nieuwe verstelbare motor bouwvormen en bescherming van de kabelboom.

De Tarot 680-serie met zijn hoge draagbaarheid, leent zich voor buiten de gebaande paden vliegen en taken, zoals luchtfotografie, remote sensing, in kaart brengen, het leven exploratie en de lijst gaat maar door. Als je klaar bent voor een pro klasse multirotor platform bent, kijk dan niet verder dan het Tarot PRO680.

Kenmerken:
• Fold-capaciteit voor transport en opslag
• 3K carbon constructie
• Vergulde PCB-verbindingen
• Lichtgewicht
• 15 minuten durende vlucht tijden (afhankelijk van de setup)
• Folding landingsgestel

specs:
Size motor om motor: 685mm
Gewicht: 780g
Hoogte vanaf de grond tot lagere staven: 180mm
Hoogte vanaf de grond naar boven: 220mm

Vereiste:
5ch Radio systeem
Flight controller
Propeller: 12 ~ 13 inch carbon fiber propeller
Motor: 620KV 4006 borstelloze motor
Batterij specificaties: 14.8V 4000 ~ 5000mAh
Brushless ESC: 20 ~ 30A

  • Tarot 680PRO Hexacopter Frame
Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 07, 2016

easy to setup and durable. love it

Lee-ann | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Apr 20, 2016

Parts missing from the kit. Hobbyking useless with regards replacement. Got this frame from the EU warehouse and hobbyking send 1 set of missing parts not the 2 as required so had to buy a full replacement frame as this was a build for a customer. Found its quicker to get a replacement frame from China than it is for hobbyking to sort out the problems. WONT BE BUYING AGAIN!!

Jason | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Feb 28, 2016

Good quality of carbon used.
Sturdy frame when all put together.
PDB is a bit awkwardly made in the upper center plate, and the battery connection tabs are also on the front when you would like to use the according canopy.
All in all that are a couple of improvements for TAROT to make.

A downside personally is the plastic T-piece on the lower part of the landing gear.
The grubscrew sollution is just not working... It is flimsy and if you go wrong you can't fasten them anymore.
My Advice: buy the original ALU CNC T-piece from tarot directly. That sollution is even LIGHTER!

But for the price it is definitely a verry good product

Klima | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jan 02, 2016

Some parts were missing, but I was still able to build the whole frame and put it in the air. Manual could be better. Still, impressed with the frame quality and low overall weight.

My Tarot 680PRO test:
https://www.youtube.com/watch?v=hCC8L1d0aMA

Tarot 680PRO heavy lift:
https://www.youtube.com/watch?v=cikLxBqk8_0

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 25, 2015

This frame is amazing with the full carbon fiber. Very strong and very easy to put together. I would buy this frame again if I needed to. The only complaint I have is that the screws can strip somewhat easily and it is unusual screw so it is hard to find.

Scipy | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Nov 04, 2015

Perfekt kann man nur Empfehlen, die Qualitt ist Super.
Die Anleitung die dabei ist aber sehr drftig.

Sutemos | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Oct 18, 2015

Good frame, all parts included, even some spare.
Currently I'm flying with emax 2213 - 935 KV motors and 4S 5000 mAh pack with no problems. My take off weight ~2.6 KG, flight time ~ 7-8 min (20pcnt power left after landing).

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 21, 2015

Really impressed with the Tarot 680 Pro, works well and is high quality! lots of spares too for when you land it hard etc!



Its easy to put together but I would suggest watching a video on youtube over following the instructions as they tend to be fairly lacking.



its easy to balance and can take a fair load!

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 24, 2015

Awesome frame. I shortened the arms to make it about 550 size. Works perfect for me. Very compact.

Six7One | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 08, 2015

LOW QUALITY Plastics.
2 Arm locks broke on first use (red ones)
Brass inserts for motor mounts have pulled out of the plastic on 5 of the 24 holes. Pulled out as soon as ANY force was applied to the screw. Not talking about torquing them down to tighten the motor mounts to arms.

GARBAGE. Buy a different frame.

  1. 1
  2. 2
  3. 3
  4. 4
Klantbestanden
Tarot 680 pro Download [389]
Motor Plate Download [128]
Assembly tips and tricks Download [645]
680 Pro, 620kv, octo esc, dji naza m2, q Download [4570]
motor and esc Download [2047]
motor, ESC mounting Download [2282]
motor, ESC mounting Download [2611]
motor, ESC mounting Download [2047]
680Pro with Canopy Download [2609]
Carbon plate on top with electronics Download [2383]
  1. 1
  2. 2
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!