Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • USA

TM Toezicht XP 45inch ARF

TM Toezicht XP 45inch ARF

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
2750 g
SKU:
TM-SuperVisionXP
Product
Omschrijving

toezicht XP

Toezicht XP is de perfecte elektrische 3D / IMAC vliegtuig.
Een groot model met een uitstekende kwaliteit dat is abelievable voor deze prijs!
Zoals je zou verwachten van een model van dit kaliber heeft het super grote stuurvlakken, alle laser gesneden balsahout hoge kwaliteit en uitstekend afgewerkt.
De kap is gemaakt van glasvezel, en de zonne-film bekleding is onberispelijk.

Luifel wordt op zijn plaats gehouden met magneten die in combinatie met de vondst kracht van het vliegtuig, sluit de kap op zijn plaats, zal het nooit loskomen tijdens de vlucht.

Dit vliegtuig wordt geleverd met mounts voor zowel EP of gas bouwt.
Model wordt geleverd met volledige instructies en stickers.


Dit is een uiterst licht vliegtuig.

Wing Span: 45inch
Wing Gebied: 380sq. In.
Lengte: 43inch
Gewicht (niet meegeleverd motor / batt): 1.9lbs
Radio Vereiste: 4 kanaals
Aanbevolen motoren;
KDA36-12M
HXT35-30B-1400

Build logboek.
Lees alles over en beelden zien van onze build log op dit model.
http://myhobbycity.com/blog.php?b=73

Product
Specifications

Aanvullende Informatie

  • Sku:
    TM-SuperVisionXP
  • Brand:
    Nvt
  • Gewicht ( g)
    2750.00
  • Lengte
    0.00
  • Breedte:
    0.00
  • Hoogte:
    0.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
El avin, por montar an, tiene un aspecto absolutamente impecable.



El corte lser es perfecto pero quiz el fuselaje est demasiado aligerado para mi gusto.



Quiz cambie el tren por uno de cable de piano pues para nuestra pista bacheada la zona donde se ancla parece excesivamente aligerada para un tren rgido de duraluminio como el que trae.



Dos traviesas diagonales a mitad de cola han llegado partidas lo que me obliga a hacer ciruja menor.



Estoy pensando en ponerle un AXI 2808 o similar, aunque casi seguro le sobrar potencia.



verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This plane finishing is neat and tidy

It compares in price and it is visible a superior air performance
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
tres bel avion bien finis
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very good airplane well finished, with nice color. the notice included is ok for me.I put a HXT 35-36A1450kv and it is great with 3s 2200mah
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good plane, good quality, good performance, very accurate on flying, and the best of all is cheap, for its price is more than a good airplane!!!!!!



Use it with at least 35 ampers speed controller and motor HXT35-30B-1400, this setup is more than enough, to fly.

Also with 20gr servos is ok.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It's a great plane :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
After several month, my SuperVision is still flying great. However, the ultralight wood structure is fragile and one must be careful during transport or when the plane is manipulated.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is my first order with HC and the plane exceeded my expectations quite a bit. The covering is excellent, the parts fit generally well...

I compared it to a mate's Ultrafly Extra and the Supervision was far better built at a lower price.

I needed 2-3 solid building evenings to complete the plane. Reinforced the fuse with CA and some epoxy. Used epoxy on the hinges instead CA. The manual is absolutely sufficient.

Installed a tail wheel, used stiffer push rods than the ones that came with it and installed bigger wheels.



Whenever you need to cut the film use a soldering iron! That gives clean cuts and welds the film to the wood!



Someone wrote he needed 2 hours to finish the plane...I want to see that...



This plane looks very much like a Brio 10, there are many reviews out there on that plane, have a look! The Supervision should perform very similarly!



You have to be a good pilot for this baby, it is incredible responsive, but it glides surprisingly well despite the AUW of 900gr. Landings are therefore quite relaxed.

Enjoy!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
ergvregbzxcfgbxXxafcdt
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A nice kit with a superb fiberglass cowl and undercarriage. Cockpit assembly is nicely done and works well.

Color lines match on mine.

I changed the wheels (the one in the kit are just good for an aircraft half that weight) and replaced the skid for a tailwheel.

The carbon tube for the wing joiner is missing, it has been replaced by a beech dowel, easy to find in a DIY shop. UH said they would send the missing part but none as came.

Fitted with a BM 2915, 2200 3S lipo and four 18gr servos AUW is 1100 gr.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.