Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

TowerPro 4130-6T 425g / 477kv / 70A Brushless Motor

Generating Links

TowerPro 4130-6T 425g / 477kv / 70A Brushless Motor

Prijs:

Now save bespaar € 0,00 € 0,00

€ 38,43
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
TP4130-6T
Geen verzendkosten? Klik hier meer leren!

TowerPro 4130-6T
Dit is onderdeel van towerpros nieuwe generatie motoren.
Verbeterde lager en de kwaliteit as en getweaked stator en magneet.

Spec.
Maat: 51mm Diameter x 89.2L
Gewicht: 425g
Idle Current: 2.2A
Config Recomended Lipo: 4-5 Cells (14,8 Minimum)
Constant: 477Kv
Shaft Diameter: 6mm
Max Efficency: 55A
Max Load: 70A
Max Power (W / 60): 1600
Voorgestelde Prop: 14x8


Motor wordt geleverd met een stevige aluminium mount plaat en spinner adapter getoond (type kraag). Stelschroef en assen houder kan worden losgemaakt om de as te keren voor verschillende firewall monteren locaties.

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Markus Richter | Geverifieerde koper

  • Overall
  • Quality
  • Value

TowerPro 4130-6T

Nov 14, 2007

Grate Motor! cool, quiet, powerfull.

thanks UH

Robert Kemp | Geverifieerde koper

  • Overall
  • Quality
  • Value

Towerpro 4130-6T

Nov 14, 2007

Awesome motor - plenty of grunt for a 10 pound model Sea Fury. Quiet runner on 14x 8.

Highly recommended

Michael A. Sons Sr. | Geverifieerde koper

  • Overall
  • Quality
  • Value

4130-6T 477kv

Nov 14, 2007

I bought this motor for an Extra 330 fiberglass from CMP that did not work out. I recently built another 330 from a different company for this motor. Wing length is 63 inches, plane weighs about 7lbs. This has turned out to be the best plane I have flown yet. This motor turns out 1200 watts @ 62 amps turning a 15X8 APC electric prop on 6s1p. Power trane runs cool and long. Using Sentilon 100 amp ESC from UH. Power to weight ratio is 2 to 1, more than ample for 3D. This motor is quiet, smooth, powerful. ESC provides smooth/linear response and control. 22.2 volts provides top end RPM.

If I were to build another plane like this one I would not be able to improve with any other choice of power train. I recommend this setup very highly.

I am curious to try the bigger brother to this motor for larger craft. This is a perfect setup, my best.

Michael A. Sons Sr. | Geverifieerde koper

  • Overall
  • Quality
  • Value

4130-6T 477kv

Nov 14, 2007

I bought this motor for an Extra 330 fiberglass from CMP that did not work out. I recently built another 330 from a different company for this motor. Wing length is 63 inches, plane weighs about 7lbs. This has turned out to be the best plane I have flown yet. This motor turns out 1200 watts @ 62 amps tuirning a 15X8 APC electric prop on 6s1p. Using Sentilon 100 amp ESC from UH. Power to weight ratio is 2 to 1, more than ample for 3D. This motor is quiet, smooth, powerful. ESC provides smooth/linear response and control. 22.2 volts provides top end RPM.

If I were to build another plane like this one I would not be able to improve with any other choice of power train. I recommend this setup very highly.

I am curious to try the bigger brother to this motor for larger craft. This is a perfect setup, my best.

Ronald van der Ham | Geverifieerde koper

  • Overall
  • Quality
  • Value

klemm35 graupner

Nov 14, 2007

I put this motor at a klemm35 from Graupner (2m/80inches wingspan, about 4.5kg/10lb total weight). This model is meant for a 15-20cc 4stroke gas engine. The tower pro motor easily pulls the 10lb model on 5s lipo (3700mAh) and a 14*7 APC like prop. The motor is very silent and has no vibrations. The plane is loose from the ground after a 30m runway (100feet). The average amp during flight were 16Amps during a scale like flight (15min on a 4000mAh lipo accu). A bigger prop will allow for aerobatics (can be up to 16*10 on a 5s according to the review above). All in all, a very good perfomance that made me happy. And therefore absolutely recommendable also due to the very high performance to cost ratio.

Marinelli Rolf | Geverifieerde koper

  • Overall
  • Quality
  • Value

Towerpro 4130-6T

Nov 14, 2007

I use this motor with 6S 5000mAh in a 1,93m Jamara Decathlon with 3,5 Kg weight. Power is enought to have fun with the plane.

Maximilian Rsch | Geverifieerde koper

  • Overall
  • Quality
  • Value

Technical data

Nov 14, 2007

Hi,



here some technical data:



I used 5 Fepos. All Measurements under load:



1. 16x10



6200 U/Min

44,3 Ampre

14,8 Volt



> 655 W



2. 16x10 with 2,5



5900 U/Min

50 Ampre

14,7 Volt



> 735 W



3. 17x11



5760 U/Min

60 Ampre

14,5 Volt



> 870 W



I fly the 16x10 with 2,5 in a Magister ( Modell ~ 2,5 kg) from Multiplex. Battery is a 5s2p fepo. With this powerful Engine the Magister fly vertical in the sky.



Great Engine.



5 Stars !



greetings from Germany

Allan | Geverifieerde koper

  • Overall
  • Quality
  • Value

TP 4130-6T

Nov 14, 2007



With 6cells at 1500 meter above sea level I get 8750 RPM from a APC 13*8 for only 25 Amps . It seems to be as efficient as the bigger AXI's . You cant go wrong at the price.

Chuck McHugh | Geverifieerde koper

  • Overall
  • Quality
  • Value

TP 4130-6t motor

Nov 14, 2007

I just put this motor in the Graupner Aeroshell T6 with a 5 cell lipo and 14x7xoar prop and all I can say is ..WOW!!! This thing has some power, 100' loops are no problem. This is a 7lbs plane, and the motor is the most powerfull for its size.

Chuck

Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!