Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

TowerPro borstelloze Outrunner 2410-09 13A / 104W

TowerPro borstelloze Outrunner 2410-09 13A / 104W

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
75 g
SKU:
TP2410-09
Product
Omschrijving
TP2410-09
Afmetingen: 31 x 62mm
Gewicht: 64.5g
Voltage: 10v (2 ~ 3 cell lipo)
Idle Current: .5A
Kv: 840RPM / V
Shaft: 3mm (Kan gebruik maken van 3mm prop saver als je wilt)
Max Efficiency: 8.4a
Max Load: 13.5A
Max Power: 104W
Voorgestelde Prop: 9 * 4,7 / Slow Fly 1047
Opmerking: De bijgeleverde plastic mount moet worden geboord om de motor aan te passen. Deze houder is inbegrepen bij de TowerPro outrunner motoren voor meer dan 6 jaar en is altijd al zo geweest.
Product
Specifications

Aanvullende Informatie

  • Sku:
    TP2410-09
  • Brand:
    Nvt
  • Gewicht ( g)
    75.00
  • Lengte
    0.00
  • Breedte:
    0.00
  • Hoogte:
    0.00
  • Kv ( tpm / v )
    840.00
  • Max Currents (A )
    13.50
  • Vermogen ( W):
    104.00
  • Lengte B ( mm ):
    35.00
  • Kan Lengte D ( mm )
    11.00
  • Max Voltage ( V )
    11.00
  • Shaft A ( mm ):
    3.00
  • Unit Weight (g):
    65
  • C Diameter ( mm )
    31.00
  • Totale lengte E ( mm )
    62.00
  • Resistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Great motor for GWS Slowstick. I have purchased about 20 of these motors for my slow(stick) friends and all come back for more (too lazy to buy their own). The motor mount works and now comes drilled on the last ones that I ordered. this mount also works: <http://www.hobbyking.com/hobbyking/store/__3613__TowerPro_Alloy_Stick_Mount_for_24_Motors.html>
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
EU SEMPRE USO ESTE MOTOR EM MEUS AEROS, SEM DVIDA SO O MELHOR CUSTO BENEFICIO. EU USO COM SPEED 20A E LIPO 3S X 1300 MAH, HELICE 10 X 4,7. PERFEITO.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A good and strong motor perfect for my tricopter
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I got one of these from HK and it had a bad bearing. I didn't get to the motor until many weeks after ordering. The discovery is grim and I don't think it cost effective to ship it back. I know HK's prices are great but I am a little soured by this experience.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
bom motor para eros de pequena escala..
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
little less good on the mount. needed it to fix my tricopter
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I've buy 4 of this for my first quadricopter. One was too tight to volve and I've replace his ball bearings. All four had need to be balanced. However quad is fly now, motor can be recommended.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Fantastic value for your buck...!!!

Use a prop saver, and cut the shaft off. Ensure the grub screws are tight on the shaft. The firewall mount (3 hole flange) can be removed simply by undoing the other two grub screws and then hold the shaft and firmly pull the flange off. I put a photo in the files to show how and where to mount the motor on the plastic mount.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Interesting comments about the mount. I had the same problem unitl I placed the shaft of the motor on to the location where the original shaft of the mount would be. The mount holes then line up perfectly and all you have to deal with is those tiny little screws and nuts. This also places the propeller in the same location as the original geared motor. I just had to rebalance and go fly. It screams with power !!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
boght this one as combo with BEC. Works great in my MPX TwinStar II.
Performance and amps are just perfect for this plane.
How ever, the quality of the motor mount could be better.
I lost one motor in the midle of the flight. So pay special attention to the screw that holds the shaft on the mount.
Will by some more a spare parts.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.