Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

TR 35-42C 1100kv borstelloze Outrunner (Vgl: 2820)

TR 35-42C 1100kv borstelloze Outrunner (Vgl: 2820)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
169 g
SKU:
TR35-42C-1100
Product
Omschrijving

Turnigy AerodriveXp

Model: TR35-42C
Input Voltage: 7,4 V ~ 14,8 V (2 ~ 4S Li-po)
Kv: 1100 rpm / V binnen 10%
Huidige capaciteit: 45A / 30s
Afmetingen: 35mm x 42mm / 1.38in X 1.65in
Shaft diameter: 4mm / 0.16in
Gewicht: 132 g
Aantal polen / magneten: 14
Aanbevolen model gewicht: 1000 ~ 2300g / 35 ~ 81oz
Vermogen equivalent: 0,30-0,35 IC glow engine
Voorgestelde prop maat: 11x8

Alle Turnigy motoren worden geleverd met een 12 maanden garantie.

Geschikt voor de volgende model gewichten;
Trainer:
2,5 kg
Warbird / Sport: 1,8 kg
3D: 1.2kg

Product
Specifications

Aanvullende Informatie

  • Sku:
    TR35-42C-1100
  • Brand:
    Nvt
  • Gewicht ( g)
    169.00
  • Lengte
    0.00
  • Breedte:
    0.00
  • Hoogte:
    0.00
  • Kv ( tpm / v )
    1100.00
  • Unit Weight (g)
    132
  • Max Currents (A ):
    45.00
  • Resistance ( mh ):
    0.00
  • Max Voltage ( V )
    15.00
  • Vermogen ( W)
    0.00
  • Shaft A ( mm ):
    4.00
  • Lengte B ( mm ):
    42.00
  • C Diameter ( mm )
    35.00
  • Kan Lengte D ( mm )
    26.00
  • Totale lengte E ( mm ):
    61.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
bateria 4s. helice 11x8. motor 2 minutos y quemado a 120C.
realmente una mierda de motor. montado en un velero 2,5m. buen empuje hasta que se quemo.
no apto para 4s.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great Motor. Running it on a 2100 Gram J-3 Cub. APC 10x5E HK 60A ESC, 2x 3000mah 4S Paralel. Gives vertical performance. Motor was getting hot. Didn't have an AMP meter. Reduced to APC 9x4.5E. Glad I did before my AMP meter came because with the 9x4.5 it's drawing 42A WOT on freshly charged batteries. Now it flies more to scale. Criuses just under half throttle getting flight times of 20 mins. Seems more efficient with the 9x4.5 and PLENTY of power for a 5LB sport/trainer. I have had some prop hits with it and the shaft and bearings are still fine. Any hits harder than what I had would be called a crash.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hallo,



dieser Motor ist der Hammer fr den Easy Glider Pro.

Ich habe eine 11x6 Klappluftschraube drauf, der Motor zieht mit einem 3s Lipo ca.48 Amp. beim senkrechten Aufstieg bis zur Sichtgrenze.

Der Akku ist auch von hier, ein 3s mit 4000mAh von Turnigy bzw. Zippy.

Der Easy Glider ist sehr sehr schnell auf grosser Hhe.

Zum Heizen in Bodennhe auch sehr zu empfehlen.

Das Modell ist sehr schnell unterwegs mit diesem Motor.

Dem Easy Glider habe ich die Winglets abgeschnitten und Kohlefaserstbe in die Flaechen eingeklebt, nun verbiegt oder flattert nichts mehr bei schnellen Vorbeifluegen oder im Sturzflug:))).

Ein sehr stabieler Flieger ist dabei entstanden.



MfG. Hauke





verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Type your review here.

Try to include as much data as possible.

EXCELENTE MOTOR, UTILIZO EM 3D DE 1.5 KG E O MESMO CONSEGUE MANTER VERTICAL SEM PROBLEMAS, RECOMENDO
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
J'ai mit sa dans mon easy-glider, il acclre a la vertical c'est gnial.
J'ai mit un accu rhino 3s de 4900mAh. le centrage est un peu diffrent mais sa vole encore bien et sa gratte bien. J'ai un contrleur 40A.
maintenant j'ai coupe un bout des aile et de la profondeur, mon easy-glider est devenu beaucoup plus joueur, mais il gratte encore. Avec ce moteur c'est carrment un avion. De plus comme il est centre arrire il fait de beau tonneaux declench


I put her in my easy-glider, he speeds to the vertical is great.
I put a battery of 4900mAh 3s rhino. balance is a little different but its still flies well and his guitar well. I have a controller 40A.
Now I cut a piece of wing and depth, my easy-glider has become much more playful, but he still scratches. With this engine is an aircraft outright. More as he makes the rear center of beautiful snap roll
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I used this motor in my parkmaster,a little bit big but it goes like a cut cat.I have ran 10-12 batteries through it (2500 3cell) with no problems no heating.i get 10 min playing hard
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I used this motor on my parkmaster,a little big but it goes like h*** no problems,usung a 2500 3 cell, have ran 10-12 batteries with no problems
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good motor,using with the 40amp plush speed, on a piper cub with 1.4meters wingspan, plenty of power for this plane, maybe too much =D
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Like motor. 2kg trust, 39A, 12x6 APC prop.
Good performance, but weak shaft, problems with bearings. After serveral months of flying the motor burnd out by flying with 4s lipo. I use this motor to MiG-3 1\8 scale.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great motor for planes up to 2Kg. Using a 3S 2200mah or more battery with a 11x6 prop yields around 350watts and the motor doesn't overheat. I would not use 4S on this unless you have a small prop - say 8x6 and after several tests to make sure that the amps drawn are not more than 30-35.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.