Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

TR 80-85-B 170Kv borstelloze Outrunner (eq: 70-40)

Generating Links

TR 80-85-B 170Kv borstelloze Outrunner (eq: 70-40)

Prijs:

Now save bespaar € 0,00 € 0,00

€ 86,43
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
TR80-85-B
Geen verzendkosten? Klik hier meer leren!

Model: HXT80-85-B
Input Voltage: max. 48V
Kv: 170 rpm / V
Gewicht: 1501g
As: 10mm
Voltage Range: 20-48v
Non Load Current: 2.6A
Stator Maat: 77x80mm
Vermogen: 6000W
Turns: 8
Resistance: 37ohm
Idle Current: 2.6A

Equivalent: 50-70cc Gas Engine

  • Kv ( tpm / v ) 170.00
  • Max Currents (A ) 0.00
  • Resistance ( mh ) 37.00
  • Max Voltage ( V ) 48.00
  • Vermogen ( W) 6000.00
  • Shaft A ( mm ) 12.00
  • Lengte B ( mm ) 93.00
  • Can Diameter C ( mm ) 80.00
  • Kan Lengte D ( mm ) 62.00
  • Totale lengte E ( mm ) 204.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

benitro | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Dec 19, 2011

Amazing, with 120A ESC and 22x12 APC E Prop we pulles 105 A. @ near 18kg of trust!!! The engine is mounted in an verry old but solid 2m Aircraft :-)

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 21, 2011

muito bem acabado e bem maior pessoaalmente, vou usa-lo em um pa-18 com 4m de emvergadura.

Klant | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Nov 23, 2010

Just received mine.

Overall looks ok, but.....

1) No Manual is included

2) There is no template for drilling the 4 holes required to fit a propellor

3) The 4 prop bolt heads need to be recessed into the wood of the prop hence you need to drill concentric different diamater holes into the prop in order to fit the front washer and nut. This is not easy to achieve unless you have a vertical drill press.

4) The weight of the motor is 1640 grams and not the advertised 1230 grams. A difference of 410 grams or 33 more. This is bad when you are ordering a motor which needs to fulfill certain weight requirements

Had I known I would have bought the 80-100 which is more powerful. But then again the weight of that one also looks wrong.

TonyB | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Oct 05, 2010

Motor works relly well in sensored drive as shown here: http://www.youtube.com/watch?v=3EiDExMfxq0

heartofcarbide | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jul 28, 2010

Yikes! The quality control on these motors is kind of lacking. We tore down five of the six 8085s we purchased, and four of them had loose windings (the many-stranded wire had some strands hanging loose into the magnets!). Two had their phase leads rubbing on the bell skirt, which is a guaranteed future short!



Fortunately, it was something a bit of super glue fixed and OMG THEY KICK SO MUCH ASS IT'S FREAKIN INCREDIBLE. HK NEEDS MORE CAPACITY!!

Klant | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jul 01, 2010

here is a test http://www.youtube.com/watch?v=am8b1tFbkQA

Peppern75 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Mar 28, 2010

Powerfull motor. I've use it in my 1:2.6 scale Inland Sport, with 10s 5800mAh LiPo and 28x12 JXF prop. The 14 kg plane is going vertical, and the motor is not warm. Video of maiden here:

http://www.youtube.com/watch?v=XLumk6r-ovU

My homepage: http://www.smartweb.no/pernil/

Klant | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Mar 28, 2010

I have 2 mountain boards with outrunners from here, and you don't need this big unless you want to go over 45 mph. I have a sk5065-270kv on the first one, which is just 1 wheel drive. My second one has 2 sk6374-170kv, had it running 2 sentilon 100amp HV speed controls. Was way to fast had it geared to 45 mph. I stacked the first ride, probably 35 mph then i tried to hit full throttle, wheelied and when came down i speed wobbled.

electric vehicles | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Mar 16, 2010

Hi,



Look what I'm doing with this motors.



http://www.evalbum.com/3048

http://www.evalbum.com/3063

Benitro | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Mar 11, 2010

I use the new assembled Engines in a Paramotor and they are AWESOME !!!!

Ich benutze die neu gebauten Motoren in einem Paramotor und sie sind der Wahnsinn!!! Die Magneten lsten sich bei den alten, die neuen haben viel bessere Lager und sind so zusammengebaut dass die Magneten sich nicht mehr lsen knne, auch bei voller Power ber Lngere zeit...

Thanks Hobby King for this great product

  1. 1
  2. 2
  3. 3
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!