Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

TrackStar 1/18 Scale 7.5T borstelloze macht System (6100kv)

Generating Links

TrackStar 1/18 Scale 7.5T borstelloze macht System (6100kv)

Prijs:

Now save bespaar € 0,00 € 0,00

€ 46,35
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
9052000007
Geen verzendkosten? Klik hier meer leren!

TrackStar prestaties nu in komt in gemakkelijk te Combo pakket te kiezen!

Met behulp van een Fast Silicon Labs MCU en hoge kwaliteit On-Semiconductor MOSFET de TrackStar 18A ESC zet een nieuwe standaard in hoge kwaliteit en toch betaalbare auto SER. Met Intelligent MCU logica van de TrackStar serie SER toe uiterst nauwkeurige opstarten controle en positionering feedback van de motor. In combinatie met de kwaliteit van 4-polige motor vertaalt dit zich in zeer soepel opstarten en acceleratie en koppel.

De Turnigy TrackStar 18A ESC beschikt ook over een groot aantal opties programmeren meestal niet gevonden in een ESC van deze omvang en kan moeiteloos worden geprogrammeerd via de Turnigy TrackStar programmering kaart (afzonderlijk verkrijgbaar)

ESC Specificatie:
Cont. Current: 18A
Burst Current: 25A
Car Grootte: 1/18
Batterij: 2-3 Cell Lipo / 4-9 Cel Ni-XX
L-BEC: 5V / 1A Output
Motor Type: Sensorloze Brushless
Afmetingen: 30 x 26.1 x 13.8mm
Gewicht: 26g (met inbegrip van draden)
Motor Stekkers: soort 3.5mm Bullet
Batterij Plug: Verplicht
Aan / uit-schakelaar: Ja
Keerzijde: Ja

Motor Specificaties:
Turns: 7.5T
KV waarde: 6100KV
Polen: 4
Diameter: 21.5mm
Motor lengte: 37mm
Verleng as diameter: 2mm
Lengte van de uitbreiding van de as: 11 ± 0,5 mm
Gewicht: 60g
Geen laden @ 7.2V: 2.7A
Max stroom: 40A
Resistance (Ω): 0.021Ω
Batterij range: 2 ~ 3s 7.4V ~ 11.1V
Operatie Temperatuur: 80 °
Max Temperatuur 130 °
Geschikte auto schaal: 1/18
Geschikte ESC: 25A
Dikte van lamineren: 0.2X20mm

LET OP:
We raden het verminderen van uw gearing als het runnen van deze motor op 3S.

  • Trackstar 1/18 Scale Brushless Power System
Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

colton | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Dec 07, 2015

I bought this motor and ESC Combo and after a few days of use I noticed the motor gets really hot but I didnt think anything of it at the time.(Specs say 130 degrees) After a few hours of use is smoked the motor and fried the esc afterwards. very disappointed.

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 10, 2015

I installed this system into my 1/16 TR-V7 with a 17t pinion. Screw holes match, no modification needed. Very compact, fast and fun. Almost too much power, needs lots of throttle control.

RC Roller | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Nov 21, 2014


Turnigy 1/18 4WD Mini Stadium Truck TrackStar 1/18th Scale 7.5T Brushless power System (6100kv) = "HOLY CRAP"

did not come with proper mounting screws and screw for the mini stadium truck did not fit this motor other than that "HOLY CRAP"

Emanuele | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Oct 28, 2014

After a few minutes using 3s lipo the engine is cooked and I broke the rotor. The motor and esc go to 3s why I broke everything ??? The engine was really strong,just insane !!!

sbstn | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Aug 13, 2014

Using this on the 1/18 stadium truck. Much much better than stock, ESC allows really nice control, it is much more linear and easy to program. Motor is fast and powerful. Good performance on 2S. You will need 2.5mmx~7mm screws for mounting the motor (together with blue loctite), and a XT60 for the ESC.

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 13, 2014

Fitted this in my RC18MT along with a Turnigy 2.2A 2S Lipo and god it shifts! Easy to install although could be supplied with a couple of 2.5mm screws to help mounting. The std size on the RC18 is 3mm so had to find two small screws! Not the End of the world though so still 5 stars, especially for the price!

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 01, 2014

the best combo for use with my 1/16 car from turnigy

trackstar is the best!!!!

Jure | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Sep 11, 2013

This is very good system and very easy to install in to your car/boat.
I am using it in a boat and it responds really nice with 3s Li-po.

unclestumpy | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jul 30, 2013

Wow I installed this into a Team Losi Mini T 1/18, when the orig ESC died the replacement was $45 at my local Hobby Shop. The only problem is that I now have to replace the Spur and pinion because the orig wont stand up to the massive torque. It is Fast and responsive and has turned a paperweight into a fun RC Thrasher!!!!

BTW It comes preset to Lipo mode,

shane | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 02, 2013

put this in a hsp 1/18 buggy running a 2cell 70c 2200 lipo goes like holy hell great motor and esc combo

  1. 1
  2. 2
  3. 3
Klantbestanden
Losi mini t graphite Download [296]
Losi mini t graphite Download [288]
Home made mini t graphite Download [269]
Losi mini t graphite 3s lipo Download [280]
1/8 vs 1/10 vs 1/18 Download [222]
Scale stack Download [261]
Losi mini-t graphite Download [296]
Losi mini-t graphite Download [288]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!