Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

TrackStar TS-600MG Digital 1/8 Scale Buggy Steering Servo 62g / 14.85kg / 0.18sec

TrackStar TS-600MG Digital 1/8 Scale Buggy Steering Servo 62g / 14.85kg / 0.1...

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
106 g
SKU:
9399000010
Product
Omschrijving

Als u op zoek bent naar de ultieme servo voor uw 1 / 8ste schaal met fouten, hebben we enkel het ding!

De TrackStar TS-600MG is een standaard formaat digitale servo met een metalen geartrain, kernloze motor en een snelle 0.18sec transittijd. Voeg daaraan toe dat het uitstekende prestaties en bedrogen uit ziet, en je hebt een uitstekende stuurservo voor de prijs!

specs:
Gewicht: 62 g
Grootte: 40.5mmx20.5mmx38mm
Koppel: 12.75kg.cm (4.8V) - 14.85kg.cm (6.0V)
Snelheid: 0.20sec / 60deg (4.8V) - 0.18 sec / 60deg (6.0V)
Voltage: 4.8-6.0v
Type: Digital Standard
Gear Trein: Meta l
Ball Bearing: N2 Ball Bearing
Lead Lengte: 265mm
Plug: JR / Futaba

Product
Specifications

Aanvullende Informatie

  • Sku:
    9399000010
  • Brand:
    Nvt
  • Gewicht ( g)
    106.00
  • Lengte
    75.00
  • Breedte:
    35.00
  • Hoogte:
    75.00
  • Unit Weight (g)
    62
  • Torque ( kg) ( min . 0,01 kg )
    14.85
  • Snelheid ( Sec / 60deg ):
    0.18
  • A ( mm ):
    41.00
  • B ( mm )
    40.00
  • C ( mm )
    38.00
  • D ( mm ):
    20.40
  • E ( mm ):
    55.00
  • F ( mm )
    27.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I bought 2 of these for my crawler, looks great feels great ! However they are not designed to hold the full torque for about 5 seconds.

I'll use the burnt one for something else.. Users take caution for stalled steering when using this for steering especially when rock crawling. Other than that, the construction of the gears are good.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good quality and reasonable price!!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Running this servo in my 1:8 truggy. Works great with no glitching. Speed and strength is good enough for my type of racing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It is a nice servo nice strong case, using it on a scx10 with great luck. not to fast but very strong and good centering. not to noisy but what do you expect for a 9$ servo. for 9 bucks id buy more
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i put it on throttle on a losi eight 2.0 ,after 3 tanks the servo had stop maybe the product centre must re tested ,also the second one the same .i know the price is very good but on buggy does n't work !
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have bought 1 to try. So far on my servo tester only but it is relatively smooth, quiet and centres without fuss. Quite powerful too. Seems quite good for the low price. I will operate the choke on 52cc petrol quarter scale with it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I tried using the steering of TLR22T. I feel like a slow operating speed will be a little, but is moving without break even running hard.
I think it's a good servo you think the price.
Servo horn was usable is (FUTABA for) 25T.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.