New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Turnigy 1: 4 Schaal Brushless skelter Alloy Chassis (kit)

Turnigy 1: 4 Schaal Brushless skelter Alloy Chassis (kit)

Discontinued Product

Please continue searching for a similar product.
Gewicht:
1876 g
SKU:
Go-Kart-KitM
WANT FREE SHIPPING? Click here to find out more!

De Turnigy 1: 4 schaal gokart is een echte knaller te rijden, met zijn lage zwaartepunt en ultra kleverig TruRubber * banden die de kart te houden scherp draaien, terwijl de niet achterdifferentieel banden leggen rubber op elke hoek!

De gehele verdieping pan is gemaakt van 4 mm aluminium met zeer weinig veerweg aan de achterzijde waardoor de skelter zeer realistisch handling.

U vindt er een 35A ESC, een inrunner motor rond 3900Kv, een tansmitter en ontvanger en 2S LiPo batterij nodig.

Stickers zijn inbegrepen, maar de bestuurder is ongeverfd, zodat je je eigen race livery op de bestuurder kan creëren.

Spec.
Lengte: 450mm
Breedte: (F) 262mm / (R) 305mm
Lengte: 201mm
Bodemvrijheid: 5 ~ 12mm
Top snelheid: 45 ~ 60 km / h
Banden: 56 × 30mm / 58 × 45mm
Pinion: 13T
Gear Ratio: 13: 2,37
Drive / Main Ratio: 13:47
T-Tube / Main Ratio: 20:30
Rijden Gewicht: 2,100g (ong.)


Vereist.
35A Car ESC (TR35A-V2, 60A-SL of HK-45A)
Ontvanger / Zender (HK-GT2 of andere 2 ~ 3-kanaals Tx)
LiPo: 2S 4000 ~ 5200mAh Hardcase Lipo (140x48x50mm maximum grootte)
Standard MG servo

TruRubber: Turnigy's eigen super-soft rubbersamenstelling die kleeft aan het wegdek beter dan de standaard straat banden.

  • Sku Go-Kart-KitM
  • Brand -
  • Capaciteit ( mAh ) -
  • Gewicht ( g) 1876.00
  • Lengte 455.00
  • Breedte 130.00
  • Hoogte 320.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Awesome value for a lot of car. I have 2 matched cars for duking it out with my brothers and buddies. This car goes like crazy. Other than a few loose screws the build quality was very good.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome value for a lot of car. I have 2 matched cars for duking it out with my brothers and buddies. This car goes like crazy. Other than a few loose screws the build quality was very good.

You can see my video of this go kart at http://www.youtube.com/watch?v=C5QFfJ0OOAE

I enjoy the challenge of driving it and pushing it to its limits. The driver figure adds a lot of detail and makes it interesting to drive. I've put a few hours of run time on it so far and haven't had any problems. During the initial unboxing I had to fix and adjust a few things on the chassis, but overall I'm pretty happy with the purchase.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

You can see my video of this go kart at http://www.youtube.com/watch?v=C5QFfJ0OOAE

I enjoy the challenge of driving it and pushing it to its limits. The driver figure adds a lot of detail and makes it interesting to drive. I've put a few hours of run time on it so far and haven't had any problems. During the initial unboxing I had to fix and adjust a few things on the chassis, but overall I'm pretty happy with the purchase.

image here . . .
<a href='http://www.hobbyking.com/hobbycity/store/uploads/741571200X5758X38.jpg' target=_blank></a>

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

image here . . .
<a href='http://www.hobbyking.com/hobbycity/store/uploads/741571200X5758X38.jpg' target=_blank></a>

PLEASE READ THIS! I found a rather disconcerting design flaw in the kart. I took the motor mount apart (off the kart) to check how I could somehow fabricate a new universal motor mount (meaning it will take in either a 380 or 540 size motor (2-in-1) . . . as I was inspecting the face plate where the motor mounts up - I found a "step" in the bottom part. I uploaded the image in the "FILES" for you to see. If the image doesn't show, just unscrew your motor and check if indeed your kart has this "step" as I refer to it.
I am assuming that this goes with all 3 versions of the kart offered here, meaning, all karts have this design flaw.
This "flaw" will cause premature wear (I may be wrong but common sense dictates otherwise) as the motor is mounted in a slight downward angle and goes against the correct spur to pinion meshing. I assume that this also causes a slight binding and makes the motor work a few percentage harder.
I do hope HK reads this and corrects this design flaw.
Wether you agree with me or not, you can't say nobody informed you.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

PLEASE READ THIS! I found a rather disconcerting design flaw in the kart. I took the motor mount apart (off the kart) to check how I could somehow fabricate a new universal motor mount (meaning it will take in either a 380 or 540 size motor (2-in-1) . . . as I was inspecting the face plate where the motor mounts up - I found a "step" in the bottom part. I uploaded the image in the "FILES" for you to see. If the image doesn't show, just unscrew your motor and check if indeed your kart has this "step" as I refer to it.
I am assuming that this goes with all 3 versions of the kart offered here, meaning, all karts have this design flaw.
This "flaw" will cause premature wear (I may be wrong but common sense dictates otherwise) as the motor is mounted in a slight downward angle and goes against the correct spur to pinion meshing. I assume that this also causes a slight binding and makes the motor work a few percentage harder.
I do hope HK reads this and corrects this design flaw.
Wether you agree with me or not, you can't say nobody informed you.

Stig jr. needs to go back to Kadet Class and stop messing arund with older brothers Formula Kart. Seriously! He's too small which explains why he can't rech the pedals and slumped forward from trying to reach the wheel. Hope can find a new driver for it.
The side pods are over-extended and too short for my liking . . need to fix that!
The rear live axle is also too wide. Will try o hav a machine sjop d some cutting of th axle.

Overall? it's okay, cosidering it's price. Though shipping killed me at customs. Hope thay can be able to send it via regular air mail

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Stig jr. needs to go back to Kadet Class and stop messing arund with older brothers Formula Kart. Seriously! He's too small which explains why he can't rech the pedals and slumped forward from trying to reach the wheel. Hope can find a new driver for it.
The side pods are over-extended and too short for my liking . . need to fix that!
The rear live axle is also too wide. Will try o hav a machine sjop d some cutting of th axle.

Overall? it's okay, cosidering it's price. Though shipping killed me at customs. Hope thay can be able to send it via regular air mail

I have 3 of these for the small price i figured get a spare one just for parts, i used the HK donkey 4200kv motor on 1600mah 3s with trackstar 60a ESC stupid fast cannot get to top speed just overpowers the tyres and spins out. tyres are nice and sticky. Surprisingly very strong i pictured hitting the kerb and bye bye but no has taken some very good hits and survived

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have 3 of these for the small price i figured get a spare one just for parts, i used the HK donkey 4200kv motor on 1600mah 3s with trackstar 60a ESC stupid fast cannot get to top speed just overpowers the tyres and spins out. tyres are nice and sticky. Surprisingly very strong i pictured hitting the kerb and bye bye but no has taken some very good hits and survived

4.5 for quality because of a over tightened screw on the back bumper.
I plan to use a 1600-2000kv motor so i get 25-30km/h of usable speed.
The gearbox is alloy and the pinion gear fits a 3.17mm shaft.
The stickers are packed flat not rolled up like with some other models.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

4.5 for quality because of a over tightened screw on the back bumper.
I plan to use a 1600-2000kv motor so i get 25-30km/h of usable speed.
The gearbox is alloy and the pinion gear fits a 3.17mm shaft.
The stickers are packed flat not rolled up like with some other models.

what a great buy and value for money this is a great rc to bash around the car park .the kart spins out a little easy but fixed with some wieghts in the rear and half at the front ,also i took off the rims and tyres from kart and fitted rims and foams from my 3racing f1-09 it is a straight bolt on the rear just change the screw to smalller one and the fronts are now bearing fit i just used a spacer behind split pin then used smaller screw again to hold wheel on this gave the kart really good grip and steering and is now running foams YEH!!!! hope it helps once again best bang for buck rc out there well made looks great and heaps of fun

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

what a great buy and value for money this is a great rc to bash around the car park .the kart spins out a little easy but fixed with some wieghts in the rear and half at the front ,also i took off the rims and tyres from kart and fitted rims and foams from my 3racing f1-09 it is a straight bolt on the rear just change the screw to smalller one and the fronts are now bearing fit i just used a spacer behind split pin then used smaller screw again to hold wheel on this gave the kart really good grip and steering and is now running foams YEH!!!! hope it helps once again best bang for buck rc out there well made looks great and heaps of fun

just recieve it today wow this thing is big nice quality and nice cart it came well packaged this car is not kit is rtr chassis i am waiting my esc,motor,and battary this cart is 1/4 scale is my first cart and i must say that for this price i am impressed by the size package and quality of matirials on cart but the best part is the back palte that the axle is attached its carbon fibre thats a big step forward for hobby king and turnigy i am in love with this cart and i am waiting for the other parts to make it raun also the tyres are very nice and sticky this cart is a must have rc car impressive cart impressive price impressive quality 5 STARS thank you hobby king-turnigy

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

just recieve it today wow this thing is big nice quality and nice cart it came well packaged this car is not kit is rtr chassis i am waiting my esc,motor,and battary this cart is 1/4 scale is my first cart and i must say that for this price i am impressed by the size package and quality of matirials on cart but the best part is the back palte that the axle is attached its carbon fibre thats a big step forward for hobby king and turnigy i am in love with this cart and i am waiting for the other parts to make it raun also the tyres are very nice and sticky this cart is a must have rc car impressive cart impressive price impressive quality 5 STARS thank you hobby king-turnigy

Fun and easy to drive. Good speed.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fun and easy to drive. Good speed.

  1. 1
  2. 2
Customer files
Kart Motor Mount Download [89]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save