Turnigy 1220 Mini versnellingsbak systeem 10300kv

• Overall
• Quality
• Value

Customer Rated

Feb 22, 2016

Overall good motor/gearbox pair. Motor shaft is 1.48mm (1.5) and gearbox shaft is 3mm (threaded). Ran with 5x5 and 6x4 prop, 2S 500Mah LiPo on a small (26"/66mm) scratch balsa Cessna O-1E Bird Dog - free plan from Outerzone UK. Very powerful for the plane.
Gearbox is aluminum with ball bearing "bushings". Mounting the box took some creativity as it has no mounting holes. It does have a oval slot (approx. 8mmx4mm) for a mounting pole.

• Overall
• Quality
• Value

Certified Buyer Rated

Jul 26, 2011

I wanted the Turnigy 1220 motor - out of stock. So I bought this system, pinion very hard to remove - anyway good motor.

• Overall
• Quality
• Value

Customer Rated

Sep 25, 2010

The one I got was binding up.Upon closer inspection I found the inner rotating portion of the motor wobbling and making contact with the outer windings.

• Overall
• Quality
• Value

Customer Rated

Aug 29, 2010

The dirt first:

Weight: 17.9g

Ratio: 7.1:1

Motor KV: 11350

Motor Interal Resistance: 0.21ohm

Max amps: 7a

No load current: 0.8a

Max volts: 7.4v





These are specs as tested, also came with a tag from factory testing, stated 7.4v no load test, 11830kv on prop shaft, 0.8a current.



From testing and Ecalc I have determined it to have 0.18ohm internal resistance.

Ideal props: 8X4 8X5 9x4 9X5 on 1s

Ideal props: 5X5 5x6 6x5 6x6 on 2s

• Overall
• Quality
• Value

Certified Buyer Rated

May 15, 2010

HInt,

Remove the shaft and loctite the spline. The large cog is not locked well enough on the spline and will come adrift without too serious a consequences, but renders gearbox inoperable until fixed.

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 21, 2010

recommended for small park or indoor flyer

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 11, 2010

Put it in a small SU27. 50cm wings. I can do 3D. Use 1s 1,3mah. Wants more?

• Overall
• Quality
• Value

Customer Rated

Jan 03, 2010

Has any one figured out the gear ratio? Has any one Tryed two cell operation?

• Overall
• Quality
• Value

Customer Rated

Dec 14, 2009

The best motor for mini models... it true

• Overall
• Quality
• Value

Certified Buyer Rated

Nov 12, 2009

Smooth operation on bench test. prop shaft seems large for motor size, could save some weight with smaller gear and shaft combo. Great deal nonetheless.