New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Turnigy 2 in 1 Power Meter / Servo Meter 1,5 TFT

Turnigy 2 in 1 Power Meter / Servo Meter 1,5 TFT

Discontinued Product

Please continue searching for a similar product.
Gewicht:
89 g
SKU:
9330000003
WANT FREE SHIPPING? Click here to find out more!

De Turnigy 2 in 1 Power Meter / Servo Meter is een geweldig hulpmiddel in uw vlucht vak te hebben. Het kan snel en eenvoudig te meten spanning, stroomsterkte en vermogen van zowat elke R / C elektronische component.

Dit apparaat heeft twee kanalen:
Kanaal 1 is ontworpen voor gebruik met servo en kan tot 8.4V / 10A. Het beschikt over JR stijl stekkers zodat u gemakkelijk uw servo's direct aan te sluiten op de meter. Dit is erg handig om te bepalen of uw ESC BEC kan omgaan met servo's van uw model.

Kanaal 2 is voorzien van 12AWG input / output leads en ondersteunt tot 60V / 100A. Dit is perfect voor het controleren van je energie systeem in alles, van micro tot grote elektrische modellen!

Alle gegevens worden weergegeven op een groot, eenvoudig te 1.5 "TFT kleurenscherm met achtergrondverlichting lezen waardoor het zichtbaar is in zowat alle lichtomstandigheden. Deze meter heeft zelfs een data grafiek display voor zowel kanaal 1 en 2.

Kenmerken:
• Accurate voltage / amperage / wattage meting
• 1.5 "TFT-backlit kleurenscherm
• 2-kanaals werking (CH1 8.4V / 10A max, CH2 60V / 100A max)
• Perfect voor het testen van de huidige gebruikt door servo's en power systems
• Verstelbare amperage / voltage alarm

specs:
Servo meter ingang CH1: 8.4V / 10A max
Power meter ingang CH2: 60V / 100A max
Display: 1.5 "TFT
Afmetingen: 58x45x9mm
Gewicht: 41g

* Opmerking:
handleiding beschikbaar om te downloaden onder het tabblad "Files" hieronder

  • Sku 9330000003
  • Brand Turnigy
  • Capaciteit ( mAh ) -
  • Gewicht ( g) 89.00
  • Lengte 165.00
  • Breedte 20.00
  • Hoogte 140.00
  • Turnigy 2 in 1 Power Meter
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Warning : Color code for servo lead :

<a href='http://www.hobbyking.com/hobbycity/store/uploads/504377516X1071262X43.JPG' target=_blank>SpareColorCable</a>

Otherwise it works great. Like it.

Screen graphs is cool but useless.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Warning : Color code for servo lead :

<a href='http://www.hobbyking.com/hobbycity/store/uploads/504377516X1071262X43.JPG' target=_blank>SpareColorCable</a>

Otherwise it works great. Like it.

Screen graphs is cool but useless.

Very nice.Works as expected.It for sure makes it a lot easier to set up your power system for max power..It would be nicer if it came with connectors already attached to it with addional connectors for different setup types.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice.Works as expected.It for sure makes it a lot easier to set up your power system for max power..It would be nicer if it came with connectors already attached to it with addional connectors for different setup types.

good to test servo max amp to help select bec.

and could help to select battery and esc

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good to test servo max amp to help select bec.

and could help to select battery and esc

Was apprehensive abt getting these. But very nice product with a flashy colour display and a peak graph display

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Was apprehensive abt getting these. But very nice product with a flashy colour display and a peak graph display

Received mine a few weeks ago and tested it on a few motors and servos, can't say anything reliable about the accurary because I don't have anything to compare with, but I think it's accurate, all values it measured are ok.

The Screen with its different options is very nice, also the diagrams are nice to have.

All in all, for this price a great product and, if you don't have anything similar yet, a must have!
BUT: It doesn't come with any connectors, you have to order and solder them by yourself, no problem but you have to knwo it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received mine a few weeks ago and tested it on a few motors and servos, can't say anything reliable about the accurary because I don't have anything to compare with, but I think it's accurate, all values it measured are ok.

The Screen with its different options is very nice, also the diagrams are nice to have.

All in all, for this price a great product and, if you don't have anything similar yet, a must have!
BUT: It doesn't come with any connectors, you have to order and solder them by yourself, no problem but you have to knwo it.

This is a nice meter. I am using it in conjunction with the 7 in 1 battery meter servo function. But wait, before you can use it you need to correct the Futaba cable supplied with it. The cable has the white signal and the black negative pins swapped. Use an Xacto to lift the tab holding the pins in the J-connector and the white signal pin should be next to the J tab. Notice inn the photo above the cable shown is also in correct!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a nice meter. I am using it in conjunction with the 7 in 1 battery meter servo function. But wait, before you can use it you need to correct the Futaba cable supplied with it. The cable has the white signal and the black negative pins swapped. Use an Xacto to lift the tab holding the pins in the J-connector and the white signal pin should be next to the J tab. Notice inn the photo above the cable shown is also in correct!

meter works great, shows stuff in real time. everythinmg seeems to be working well, HOWEVER it will not work below 8V! so if you have anythign that runs on 2S and want to check out it's max amp draw u're out of luck. it'll keep flashing warning. great meter otherwise!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

meter works great, shows stuff in real time. everythinmg seeems to be working well, HOWEVER it will not work below 8V! so if you have anythign that runs on 2S and want to check out it's max amp draw u're out of luck. it'll keep flashing warning. great meter otherwise!

Super usefull gadget, u can display many values and can see amps in time and consumption in mAh.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Super usefull gadget, u can display many values and can see amps in time and consumption in mAh.

Gute Anzeige fr die Ermittlung 2 verschiedener Stromkreise.

So ist der antriebsakku und auch im anderen Kreis der Stromverbrauch des Empfnger inkl servo ersichtlich.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Gute Anzeige fr die Ermittlung 2 verschiedener Stromkreise.

So ist der antriebsakku und auch im anderen Kreis der Stromverbrauch des Empfnger inkl servo ersichtlich.

I have modified this meter in order to meausure power source with lower than 8V.

The power for the MCU is obtained by TL431 and NPN boost transistor and the regulated output voltage is 3.3V. Power consumption is 33mA @ 15V.

I added one 1A silicon diode to the cathode of existing diode (code 4A) on PCB. Plus( ) input of auxialiary power is supplied through the additional diode and negative(-) input is connected to negative(ground) pattern of PCB.

Howebver remember that always warning message appears on LCD when you measure power source with lower than 8.0V.

This is because you cannot set the minimum warning value at lower than 8.0V which is programmed in MCU and you cannot change this value.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have modified this meter in order to meausure power source with lower than 8V.

The power for the MCU is obtained by TL431 and NPN boost transistor and the regulated output voltage is 3.3V. Power consumption is 33mA @ 15V.

I added one 1A silicon diode to the cathode of existing diode (code 4A) on PCB. Plus( ) input of auxialiary power is supplied through the additional diode and negative(-) input is connected to negative(ground) pattern of PCB.

Howebver remember that always warning message appears on LCD when you measure power source with lower than 8.0V.

This is because you cannot set the minimum warning value at lower than 8.0V which is programmed in MCU and you cannot change this value.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Customer files
Turnigy 2 in 1 Power/Servo Meter User Ma Download [1760]
Instruction Sheet Download [1242]
wiring OK Download [159]
Additional cooler 2 Download [313]
Additional cooler 3 Download [387]
Additional cooler 4 Download [310]
Additional cooler 1 Download [315]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save