Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Turnigy 2810 EDF Outrunner 4600kv voor 55 / 64mm

Generating Links

Turnigy 2810 EDF Outrunner 4600kv voor 55 / 64mm

Prijs:

Now save bespaar € 8,58 € 8,58

Special Price € 4,35 € 4,35

You save bespaar € 8,58 € 8,58

Was  € 12,93

Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
T28102A4600
Geen verzendkosten? Klik hier meer leren!
Turnigy 2810 EDF Outrunner 4600kv voor 55 / 64mm
specs:
kV 4600
Afmetingen: 46 x 28mm
Shaft: 2.3 / 3.0mm
Voltage: 11.1V
Gewicht: 59g
No-load stroom: 2.5A
No-load RPM: 51.280
Laad stroom: 29.3A
Load RPM: 37.740
Thrust: 580g
Montagegaten Bolt Circle: 18mm
Mtg. Hole Number & Grootte: 4 x M2.5
 
Inclusief 2 assen, 2.3 & 3.0mm
  • Kv ( tpm / v ) 4600.00
  • Max Currents (A ) 2.30
  • Resistance ( mh ) 37.00
  • Max Voltage ( V ) 12.00
  • Vermogen ( W) 23.00
  • Shaft A ( mm ) 3.00
  • Lengte B ( mm ) 43.00
  • Can Diameter C ( mm ) 20.00
  • Kan Lengte D ( mm ) 12.00
  • Totale lengte E ( mm ) 58.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Washington | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Oct 02, 2012

Just got it today. Had to change the shaft for my 64mm EDF. A bit of a headache to change it.... needed a piece of wood with a hole and a small hammer...

I installed it in my lanyu T-45 hawk to replace the 4300kV stock motor that gave just a marginal performance. Just came back from the field from a late afternoon/evening test of the new setup. With this new engine it's no rocket, but I can do much more in terms of aerobatics, so I'm quite pleased with it.

Also it does not demand too much from the esc and battery. A quick test with a fully charged nanotech 2200mAh 3s 35-70C gave me an average around 28A WOT with a peak of 31A over a one-minute run, so the nominal max current seems to be spot on for a 5-blade 64mm EDF! So I'm confident my blue series 40A ESC is enough (sorry, no static thrust measurement).

All in all a great buy for ~$10. Very happy.

ANARIT-119 | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jan 10, 2011

This EDF is good in quality and powerfull... the wires are strong and attached to the core very strongly. The motor is so attractive...

Rooks | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jan 02, 2011

This motor is fast and good on 3S, i use this on the 64mm ducted fan unit you can find it under EDF accessories.

Danzo | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Dec 16, 2010

Received them today and they look like nice motors. I will post more once I can find screws to mount them because they come with NO screws for mounting. So now I need to find out what size the screw holes are!!!

Klant | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Jul 24, 2010

Great motor for the price.I put it on a 64mm EDF fan that I got from HK for $3.99. I put this set up on a HK riccs Mirage 2000 to upgrade the stock system,and now I can do grass take-offs.

I didn't get the 3 different shafts that's included,they only gave me the 1 that was in it.

Klant | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Apr 17, 2010

450 g trust on 3 S lipo with 55 impiller with lips

Come without screws :(, all 3 shafts 3.17

DOCA-SP | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Apr 01, 2010

Otimo motor para jatinhos leves (ate 400 gramas) com seu alto KV da uma excelente performace. Recomendo.

Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!