Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • USA

Turnigy 450 H2218 borstelloze outrunner 3200KV

Turnigy 450 H2218 borstelloze outrunner 3200KV

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
85 g
SKU:
TR22184-3200
Product
Omschrijving

Deze motor is speciaal ontworpen voor de 450 helikopter bereik en een perfecte pasvorm voor een van onze HK450 helikopters.

Spec.
Model: 2218
Turns: 4
Cellen: 2 ~ 4S
Kv: 3200rpm / V
Geen belasting Huidige: 3.6A / 10V
Max vermogen: 500W
Gewicht: 67g
Shaft diameter: 3.17mm
Afmetingen: 27,2 x 36,5mm
Recomended ESC: 2 ~ 4S / 50A

Product
Specifications

Aanvullende Informatie

  • Sku:
    TR22184-3200
  • Brand:
    Nvt
  • Gewicht ( g)
    85.00
  • Lengte
    105.00
  • Breedte:
    33.00
  • Hoogte:
    48.00
  • Kv ( tpm / v )
    3200.00
  • Max Currents (A )
    0.00
  • Vermogen ( W):
    500.00
  • Lengte B ( mm ):
    38.00
  • Kan Lengte D ( mm )
    21.00
  • Max Voltage ( V )
    15.00
  • Shaft A ( mm ):
    3.00
  • Unit Weight (g):
    67
  • C Diameter ( mm )
    28.00
  • Totale lengte E ( mm )
    54.00
  • Resistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Nice motor for scale flying and some stunts, runs smooth and cool when not pushed to its limits. Very good motor for headspeeds around 1600 - 2500 rpm with 10 - 12 teeth pinion gear. Be sure you loctite the little grub screw holding the can on the shaft, it is not secured and could come loose, leaving your heli without power when you need it. After securing this grub screw, the motor is reliable and runs smooth for a long time.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Turnigy 450 H2218 Brushless outrunner 3200KVTurnigy 450 H2218 Brushless outrunner 3200KV
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Fine powerful motor for 450 sized copter. I got one in my 450PRo with 4S setup.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
hi put this motor on my 450 PRO, Very nice power in 4S !
Look my vido on this page(test H2218 3200kv).
My setup Heli : 3xHenge MD933
1xTGY 306G
ESC Himodel 60A Gov store
CX-3X1000 Flashed ZYX 3.5
Helical gear 121x11T
Idel 2 at 45pcnt on the vido
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
on a 60amp esc (the recmmended is 50amp) and half throttle ,the motor became extremly hot after only few seconds(untouchable) so it melted the hot glue around the mounting plate...very dissapointed..
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Luft einwandfrei rund. Dieser Motor hat 8 Pole (fr die Programmierung ev. wichtig).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice quality finish and well balanced and smooth these are a nice quality unit well suited to either heli small prop or edf use
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good product at a great price!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
We built this outrunner in a 1/10 kyosho nitro-truggy (kyosho tr-15 st).
It has a lot of power. Great acceleration and good top speed with a 13T pinion gear (also available at hobbyking - but sadly only on the international warehouse.
We use it with the 35A HobbyKing esc. We know it is too small - but it is tho only car esc available from the EU warehouse. And it seems to work really good.
Btw: At first we used a HK inrunner (S2838-2800 Brushless Inrunner) but it got really hot and one day it burned... this outrunner seems to be the better choice - stays cool, no tickling at low speed and a lot of power ;)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
powerful motor in a T-REX 450 and 3 cells
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.