Become a Dealer Blog
Registreren

Totale prijs

US$ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Turnigy 540S V-Spec Inrunner w / Waaier 1350kv

Generating Links

Turnigy 540S V-Spec Inrunner w / Waaier 1350kv

 
Prijs:

Now save bespaar US$ 0,00 US$ 0,00

US$ 26,98
Verzonden vanaf:
  • Global
Al gekocht Discontinued Product

Please continue searching for a similar product.
1 year warranty
SKU:
D540S-1350
Geen verzendkosten? Klik hier meer leren!
Hoog koppel inrunner, uitstekend geschikt voor het uitvoeren van propellers zonder een versnellingsbak.
Het unieke stator ontwerp zorgt voor een lage stroom en hoog koppel motor zeer geschikt voor outrunner vervangingen en veel efficiënter dan inrunners van dezelfde grootte.
Afmetingen: 52mm x 36mm, 66mm (met as)
Gewicht: 141g (kv1350) (niet inclusief connectors)
Diameter van de schacht: 5mm
Lengte van de voorste as: 13mm
Lamineren dikte:. 2mm

Spec.
Batterij: 3-4 Cell 4S / 14.8V
RPM: 1350kv
Max stroom: 40A
Geen belasting stroom: 2.1A
Interne weerstand: 75.2ohm
Gegevens:
3S 11.1V
Prop: APC7x4, APC10x4.7
Max Stroom: 16.6A, 37A
Pull: 720g, 1260g
4S 14.8V
Prop: APC7x4
Max stroom: 29A
Pull: 1100g
ESC: 60A
Batterij Type: 3-4S Only
  • Kv ( tpm / v ) 1350.00
  • Max Currents (A ) 40.00
  • Resistance ( mh ) 75.00
  • Max Voltage ( V ) 12.00
  • Vermogen ( W) 0.00
  • Shaft A ( mm ) 5.00
  • Lengte B ( mm ) 51.00
  • Can Diameter C ( mm ) 36.00
  • Kan Lengte D ( mm ) 47.00
  • Totale lengte E ( mm ) 65.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 13, 2012

First impression for this motor is a well finished and strong motor, with powerfull magnets in it. However, during first tests on ground, i have discovered that the top cap of this motor (where the axis is) unscrew itself because there is no black screw at this place. if I had not discovered this fault, my plane would be destroyed.



So i strongly recommend to check this and glue the top cap with a bit of epoxy glue before flying with it.

kraken | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 15, 2012

super motor s vnitnm chlazenm

Ross | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jan 27, 2012

Nice motor..as others have said, it is high cogging and difficult to turn the rotor by finger only.

I have been trying to get an accurate KV reading for this motor using the hobby king kv meter. I'm not sure what setting to put the poles at.
This motor has 18 legs on the stator and cogs 18 times.
If I set the kv meter to 6 poles, the KV comes to 1020 kv
""""""""""""""""""""""""""""""" 9 poles, the KV comes to 680 kv
""""""""""""""""""""""""""""""""18 poles,the KV comes to 300~ kv
All readings are max throttle, no load, 3 and 4S batteries.

Visual inspection of this motor showed some wires were very close to the internal rotor and possibly rubbing against it. I took off the endbell and tucked the wires back towards the stator.

Smile&Wave | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 14, 2011

With Turnigy plush 60 amp esc and Nano 3S 2200 45c following results:.....

10x7 => 63A 9.2V 580W 10,100rpm;.....

9x7 => 59A 9.6V 560W 12,510rpm;.....

9x6 => 55A 9.2V 506W 13,230rpm;.....

Impossible to run 9x6 on 4S as Amps draw = 70A at half throttle and motor get hot.

80Alle | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 07, 2011

runs great, i used in electric glider with 3S 12x6,5 prop

paulgb73 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 21, 2011

Nice motor but is not 1350kv, I think its somewhere around 1800kv so I would recommend a 6x5 prop on 3 or 4 cells for a ballistic plane.

hallali | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

May 02, 2011

kraftvoll und hochdrehend. leider hat sich der motor im zweitem steigflug aufgedreht.
verarbeitung wird wohl nicht so gro geschrieben

vaughan | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 09, 2011

Great. The cooling effect of the impeller should finally give this inrunner a place in more planes. Will be investing in a lower kv model to get the most out of it.

Upside_down | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 17, 2011

high cogging torque.

lcondello@tiscali.it | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jan 25, 2011

found a small discreancy w.r.t. the KV spec in real the motor provide 2150 Kv instead of 1350.
In any case is a great item but too much for my needs
I will keep in my storage area to use for such 3D plane.

  1. 1
  2. 2
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!