Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

Turnigy 600 H37403 borstelloze Outrunner 1180kv

Turnigy 600 H37403 borstelloze Outrunner 1180kv

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
432 g
SKU:
TR37403-1180
Product
Omschrijving

Turnigy 600 H37403 borstelloze Outrunner 1180kv

Een grote motor voor 550 ~ 600 klasse helikopters zoals de Align T-Rex 550 en HK600

Spec.
Model: 3740
Turns: 3
Cellen: 11s
Kv: 1180rpm / V
Geen belasting Huidige: 3.4a / 10v
Max vermogen: 3kw
Gewicht: 379g
Shaft diameter: 6mm
Afmetingen: 44.1 x 65mm
Recomended ESC: 100A HV

Product
Specifications

Aanvullende Informatie

  • Sku:
    TR37403-1180
  • Brand:
    Nvt
  • Gewicht ( g)
    432.00
  • Lengte
    95.00
  • Breedte:
    60.00
  • Hoogte:
    80.00
  • Kv ( tpm / v )
    1180.00
  • Max Currents (A )
    75.00
  • Vermogen ( W):
    3000.00
  • Lengte B ( mm ):
    65.00
  • Kan Lengte D ( mm )
    45.00
  • Max Voltage ( V )
    40.00
  • Shaft A ( mm ):
    6.00
  • Unit Weight (g):
    379
  • C Diameter ( mm )
    44.00
  • Totale lengte E ( mm )
    85.00
  • Resistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Nice motor for the price. I'm using it on a KDS Innova 550 with a 15T pinion and 4500mah 6S 50C Lipos. Lots of power and very smooth. I'm using a YEP 100A (the early Helidrive version). Timing is set to auto and 8KHz PWM. The motor is quite hot at the end of a flight, but not too hot. You can touch it, but not for very long. I may try manual timing around 5 degrees. I see the new Scorpion HKIII-4025 1100kv 3T motor calls for 8KHz PWM and 5 degrees timing. So all up I'm very pleased with this motor. p.s. make sure you put a bit of thread lock in the motor shaft set screw hole, on the bottom of the motor, to stop it backing out in flight.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
. , . , 770Kv - 10S, 4.9A 1.8 10S.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Useing this motor with a 13 toogh pinion. lots of power!



Pinion gear = (Target RPM) * (Teeth on main gear) / (Motor KV) / (Voltage) / (Motor efficiency)



2000 (rpm) * 170 (teeth) / 1180 (KV) / 22.2(Voltage) / .96 (ME) = 13.5 Pinion

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
este sera para nuestro elicoptero 450
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Been hearing about people getting 1 or 2 flights before turnigy motors burning up. Do a check of the wires coming out of the motor. This motor I purchased, found 2 out of the 3 wires were cut on the body of the motor and touching the metal. Luckily it was caught before putting it in.

I was able to get some heat shrink tubing on each wire. The edges of the motor around the openings are sharp. So keep an eye out for this.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Setup:
HK 600GT
CC ICE 100
Micro Beast FBL
17T piniong
2200 headspead
turnigy 5000mah 6s 20c
max watt 3572W at 160amps
engine temp at about 40deg celcius

I realy like this engine, lots of power :)


verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.