Leverancier worden Blog Nieuwe items

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Turnigy Aerodrive SK3 - 2118-2750 borstelloze Outrunner Motor

Generating Links

Turnigy Aerodrive SK3 - 2118-2750 borstelloze Outrunner Motor


Now save bespaar € 0,00 € 0,00

€ 14,74
Al gekocht Discontinued Product

Please continue searching for a similar product.
Geen verzendkosten? Klik hier meer leren!

Turnigy SK3 Motoren zijn de volgende sprong voorwaarts in motor kwaliteit en design. We gaf de ingenieurs om de beste kwaliteit magneten, lagers en materialen beschikbaar zijn voor hen de bron en het ontwikkelen van een motor die zou niet alleen rivaal, maar overtreffen de kwaliteit van vele toonaangevende motor produceert op de markt vandaag.

Het resultaat is een efficiënte, hoog kaliber motor met behulp van kwaliteit dubbel afgeschermde lagers, gesinterde Neodymium magneten en een string gewonden stator zorgen voor een nauwkeurige en consistente kronkelende elke keer.

De Turnigy SK3 motoren zijn geschikt voor modelbouwers die op zoek zijn naar een hoge kwaliteit borstelloze motor zonder compromissen.

Turns: 9T
Voltage: 2 ~ 3S LiPoly
RPM / V: 2750 kv
Inwendige weerstand: 0,22 Ohm
Max Laden: 5A
Max Power: 39W
Shaft Dia: 2.0mm
Gewicht: 17g
Motor Plug: 2mm Bullet Connector

  • Kv ( tpm / v ) 2750.00
  • Max Currents (A ) 5.00
  • Resistance ( mh ) 220.00
  • Max Voltage ( V ) 11.00
  • Vermogen ( W) 39.00
  • Shaft A ( mm ) 2.00
  • Lengte B ( mm ) 21.00
  • Can Diameter C ( mm ) 21.00
  • Kan Lengte D ( mm ) 18.00
  • Totale lengte E ( mm ) 25.00

Dimension Diagram Guide

  • attributeset-10


Upload video

Registreer u om video's te uploaden aanmelden of registreren

Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:

Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:

Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Daniel | Geverifieerde koper

  • Overall
  • Quality
  • Value


Jul 30, 2017

High quality motor with high power with 3s and 5x4 prop. Little bit problem with O rings because is impossible to assembly them - is not space beetween motor and heads of screws. If you assembly them than is O ring little bit damaged by head of screw and after swith on the power of motor propeller left motor because O ring will tear. I used rubber to ladies hair and all working perfect.

insaneRC | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Dec 29, 2014

I have one of these on a racing plane of mine, I run it on 4s with a 4.7x4 prop. It puts out about 280-300grams thrust, and the plane pushes 120mph. When I land, the motor is just barely warm. Over all this motor is good deal, I think you will not be disappointed. You can also run a 5x5 on 3s, or a 6x4 on 2s.

rappa | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 06, 2014

godd motor!! hobbyking !!!

bstarkey54 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Feb 10, 2014

About 10 people in my club use these motors and they are great!!! We use a 460 to 760 3 cell with no more than a 5 X 4.3 prop. We have put these on our Bonsai's and they just scream. Vertical until out of sight. They put out considerably more watts that that listed. We use the 15 - 18 A ESC's. Prettiest motor around and they scream. Lots of fun.

Yuto Kang | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Apr 01, 2012

I mounted on of these on a 17" F-22 Raptor that I built from foam board. Using a 4045 prop, this F-22 screams on a 3 cell Lipo.
The Raptor with battery is just under 220 gr. and this little motor takes it our of site almost faster than you can cut back on the throttle. Very pleased with the motor and will definitely be order more for other foamies.
While a lot of the other motors seem to have problems with wires breaking or bearing, this motor is built as advertised. It's made really well and out-performs the other little motors of similar size. You won't be disappointed.

SomeUselessGeek | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Feb 11, 2012

39 watts?!? They have GOT to be kidding. Last night I ran one of these motors on a HK EPO Park Jet for four minutes at OVER 100 WATTS. Way more power than I can get out of any other motor this size. At the end of a five minute session (mostly WOT) the motor was barely warm to the touch. Hopefully somebody with some instruments can measure the actual efficiency of this motor and put some numbers down here.

This is my new favorite line of motors.

iacei | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Oct 27, 2011

Very nice powerfull motor on 3S with a 5x4 it rips the lamas ass!

Very good for my fox, even a bit overpowered.

Watch for the Amps though I would suggest a 12A ESC minimum.

MotorData(SK3_sv_1811).pdf Download [365]
Drawing Download [87]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!