Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Turnigy Aerodrive SK3 - 2122-1570kv borstelloze Outrunner Motor

Generating Links

Turnigy Aerodrive SK3 - 2122-1570kv borstelloze Outrunner Motor

Prijs:

Now save bespaar € 0,00 € 0,00

€ 15,33
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
SK3-2122-1570
Geen verzendkosten? Klik hier meer leren!

Turnigy SK3 Motoren zijn de volgende sprong voorwaarts in motor kwaliteit en design. We gaf de ingenieurs om de beste kwaliteit magneten, lagers en materialen beschikbaar zijn voor hen de bron en het ontwikkelen van een motor die zou niet alleen rivaal, maar overtreffen de kwaliteit van vele toonaangevende motor produceert op de markt vandaag.

Het resultaat is een efficiënte, hoog kaliber motor met behulp van kwaliteit dubbel afgeschermde lagers, gesinterde Neodymium magneten en een string gewonden stator zorgen voor een nauwkeurige en consistente kronkelende elke keer.

De Turnigy SK3 motoren zijn geschikt voor modelbouwers die op zoek zijn naar een hoge kwaliteit borstelloze motor zonder compromissen.

Specs.
Turns: 8T
Voltage: 2 ~ 3S LiPoly
RPM / V: 1570 kv
Inwendige weerstand: 0,14 Ohm
Max Laden: 6A
Max Power: 51W
Shaft Dia: 2.0mm
Gewicht: 25g
Motor Plug: 2mm Bullet Connector

  • Kv ( tpm / v ) 1570.00
  • Max Currents (A ) 6.00
  • Resistance ( mh ) 140.00
  • Max Voltage ( V ) 11.00
  • Vermogen ( W) 51.00
  • Shaft A ( mm ) 2.00
  • Lengte B ( mm ) 24.00
  • Can Diameter C ( mm ) 21.00
  • Kan Lengte D ( mm ) 22.00
  • Totale lengte E ( mm ) 29.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Steed | Geverifieerde koper

  • Overall
  • Value
  • Quality

Ok

Jul 02, 2019

good except missing prop shaft or proper mount. only rubber band / safe prop mount provided... not good if that is not what is required... no other option as usually provided with all other motos

Uli | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Nov 03, 2014

I use this Motor to power my Mini FPV Skywalker (335g). I use a 6x4 Prop, a 3S1000mAh Battery and a 10A ESC. 30pcnt throttle is enough for floating around. Flight time is about 20min with more than 20pcnt left in the Battery. 100pcnt throttle and my Skywalker goes endles straight vertical. On the ground 100pcnt throttle is about 9A of current draw (as fas as I remember). GREAT MOTOR!!

Markox | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Nov 12, 2013

Good buy for the price. Running 2 cell 25-50c 950mah NanoTech Lipo, APC 8 x 3.8 prop 10amp turnigy plush speedy gives 12.04 amps at 92.8watts, perfectly matching the much more expensive Hacker A10-9L. Will 3D a 280gram model OK.
Only Con. Not enough room around screws to place the 0-ring. I did strip the motor and dremel out the frame slightly to clear the o-ring, Now works a treat.

alexklimov | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Nov 23, 2012

With APC 8 x 3.8 SF and fully charged 2s lipo a have got 11.2. After 10 second motor is little worm.

mike_o | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Aug 16, 2012

Nice motor, but with a problem. I bought two of these for a "EasyTwin" mod. Motor draws 5A at 8V (40W) driving a 6"x4" APC prop static. 5-6A at 11.1V (3S) seems plausible in dynamic conditions. B U T, the screws to hold the prop O-ring are seated so closely to the motor bell cut-out, that you can not fit the O-ring. You have to take out the screws (lock-tite = difficult) and re-fit them inside the O-ring. Not an easy feat given the size of the motor. Check out the photo to see what I mean. Longer screws will on hel a little. Apart from that, a very nice little motor.

| Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

May 12, 2012

motor forte e pequeno ideal para parkflyer e 3d feito em depron.

sokalowy | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Dec 30, 2011

Very nice motors. Great package :) I use them in my Micro Quad by JR65 (25cm - longest (diagonal) distance between motors). Ideal for 5" or 6" props. Distance between screw mounts is 14mm. No female connectors (not needed in my case, I soldered it directly to ESC).

GGrant | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Oct 23, 2011

Looks good. Spins well. Comes with 3 male 2 mm connectors, but they don't include the 3 females! Then the instructions say to be sure not to modify the wiring! So now I wait for some 2 mm female connectors! Should be included with the motor. My LHS doesn't sell that size. Now it will be a month before I can comment on the quality.

ahmad | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Oct 05, 2011

i only say about this motor is WOWW.... this have the same design as hacker a10 series. this turnigy sk3 is a real deal best looking motor for foamies have same power and punch like hacker a10 9l magnet are superb and quality is superb iam using it with 2s 460 nanotech with 12amp plush esc it pull the plane to ultimate limit my model weight 170 grams with battery highly recommended !!!!! if u can then grab 2 atleast!!!

Klantbestanden
Drawing Download [58]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!