Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global
  • USA

Turnigy Aerodrive SK3 - 2826-1130kv borstelloze Outrunner Motor

Turnigy Aerodrive SK3 - 2826-1130kv borstelloze Outrunner Motor

QTY:

Now save bewaar € 0,00 € 0,00

€ 14,95
Stock:
Gewicht:
114 g
SKU:
SK3-2826-1130

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Product
Omschrijving

Turnigy SK3 Motoren zijn de volgende sprong voorwaarts in motor kwaliteit en design. We gaf de ingenieurs om de beste kwaliteit magneten, lagers en materialen beschikbaar zijn voor hen de bron en het ontwikkelen van een motor die zou niet alleen rivaal, maar overtreffen de kwaliteit van vele toonaangevende motor produceert op de markt vandaag.

Het resultaat is een efficiënte, hoog kaliber motor met behulp van kwaliteit dubbel afgeschermde lagers, gesinterde Neodymium magneten en een string gewonden stator zorgen voor een nauwkeurige en consistente kronkelende elke keer.

De Turnigy SK3 motoren zijn geschikt voor modelbouwers die op zoek zijn naar een hoge kwaliteit borstelloze motor zonder compromissen.

Specs.
Turns: 26T
Voltage: 2 ~ 3S LiPoly
RPM / V: 1130 kv
Inwendige weerstand: 0.120 Ohm
Max Laden: 13A
Max Power: 125W
Shaft Dia: 3.0mm
Bolt holes: 16mm en 19mm
Bolt thread: M3
Gewicht: 44g
Motor Plug: 3,5 mm Bullet Connector

Product
Specifications

Aanvullende Informatie

  • Sku:
    SK3-2826-1130
  • Brand:
    Nee
  • Gewicht ( g)
    114.00
  • Lengte
    110.00
  • Breedte:
    45.00
  • Hoogte:
    80.00
  • Kv ( tpm / v )
    1130.00
  • Max Currents (A )
    13.00
  • Vermogen ( W):
    125.00
  • Lengte B ( mm ):
    26.00
  • Kan Lengte D ( mm )
    12.00
  • Max Voltage ( V )
    11.00
  • Shaft A ( mm ):
    3.00
  • Unit Weight (g):
    44
  • C Diameter ( mm )
    28.00
  • Totale lengte E ( mm )
    40.00
  • Resistance ( mh ):
    120.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Has plenty of torque for a small motor. if you want a motor for a small glider, quad copter or small plane, I recommend this motor.
Quality
Value
Overall
Quality
Value
Overall
These are nice motors. I bought 3 of them a year ago, and have been happy with all of them. My favourite prop for these has been a BlueBird 9x6E, basically equivalent to the APC 9x6E. (Note that this is NOT the SlowFly prop, although the 9x4.7SF is also decent.) With 2200 mAh, 25C, 3S LiPo and 15A to 18A ESC, one of these will haul 25 oz (700 g) around the sky with authority. Search YouTube for "flying over Rouge Beach" for one example.
Quality
Value
Overall
Quality
Value
Overall
Very good motors, used on quad. everything needed in the box. Just choose your mounting.
A bit of equilibration and done. Multicopter flies superbly with flips. 9x6 props give largely enough thrust. Loops and Rolls.
Quality
Value
Overall
Quality
Value
Overall
Engine very well balanced. Hardly needed to be balanced. I bought 5 engines and only one required a little adjustment, if you are too picky, otherwise do not require adjustment. Makes very little noise. Undecided what propeller to use, but probably 8" once the engine has a max load of 13A.
Quality
Value
Overall
Quality
Value
Overall
Very good little motor. Got 4 of them form my quad. Very lightweight, very powerful. Feels more then 125w.
Quality
Value
Overall
Quality
Value
Overall
Got these for a quad 450. shiny stainless /chrome appearance. Very smooth and responsive with 30a blue series esc (sim.k firm.). Just warm after 10 minutes flight.Comes with prop adapters but you'll need 3mm mounting screws.
Noticed Motor spins freely and smooth with gentle flick before flight (cold), after flight (warm ),motor wont spin as well. Bearing well lubed with scorpion motor oil. Not sure if its bearing issues ,still very quite and smooth in flight.
Quality
Value
Overall
Quality
Value
Overall
I have 8 of these motors on two quads. A couple of them seemed like the bearings were a bit rough at first and they were noisy when running. After a few hours flying time they seem to have smoothed out. Plenty of power using 8x4.7x3 props. I have tried running 10x4.7 two blade and they fly great, but seem a bit warm after an 8 min flight. Quad is more responsive with the 8x4.7 three blade. Hovers at half throttle with both size props. I have some 9x4.7 two blade on the way and will update as to how these work. So far so good. I am running the HK SS Series 18-20 amp ESC and they work fine with this motor. I like the bolt on prop adapter that come with the motors. I have crashed several times with no motor or shaft damage, even though I broke all the blades off the props. I will buy these motors again for my next project. It's going to be real hard to beat these for the price.
Quality
Value
Overall
Quality
Value
Overall
Value plusplusplus! Very smooth acceleration. Very professional in all aspects at a price not really different from the rest. Comes in a sleek black foam padded box along with prop adaptors for whatever end you want to drive your prop from. Gold plugs come already attached so no faulty motor fear from soldering plugs yourself. Spoil yourself!
Quality
Value
Overall
Quality
Value
Overall
These motors are excellent. I bought 5 of these (4plus1 spare) for a quad copter and the 4 I used worked perfectly and consistently. the bearings are smooth, and stayed that way after about an hour of various flying indoor and out in the cold and snow. The insulation is a bit thin though, and one of the wires of one of the motors got knicked in a crash. Still works though ;) I use these with the cheap plastic 8x4.5 props, they work well.
Quality
Value
Overall
Quality
Value
Overall
This is my first aerodrive sk3 motor. I have bought other turnigy motors, but this is the best one I got. Well machined, it's exatly the weight declared. I put it in my acrobatic Oxalis , and you can't almost ear it when it turns. No vibrations at all. I will get a bigger aerodrive SK3 for my Great Planes Spitfire.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Drawing download now [85.91Kb]

Combine

essential items and
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.