Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global
  • USA

Turnigy Aerodrive SK3 - 2830-1020kv borstelloze Outrunner Motor

Turnigy Aerodrive SK3 - 2830-1020kv borstelloze Outrunner Motor

QTY:

Now save bewaar € 0,00 € 0,00

€ 16,64
Stock:
Gewicht:
129 g
SKU:
SK3-2830-1020

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Product
Omschrijving

Turnigy SK3 Motoren zijn de volgende sprong voorwaarts in motor kwaliteit en design. We gaf de ingenieurs om de beste kwaliteit magneten, lagers en materialen beschikbaar zijn voor hen de bron en het ontwikkelen van een motor die zou niet alleen rivaal, maar overtreffen de kwaliteit van vele toonaangevende motor produceert op de markt vandaag.

Het resultaat is een efficiënte, hoog kaliber motor met behulp van kwaliteit dubbel afgeschermde lagers, gesinterde Neodymium magneten en een string gewonden stator zorgen voor een nauwkeurige en consistente kronkelende elke keer.

De Turnigy SK3 motoren zijn geschikt voor modelbouwers die op zoek zijn naar een hoge kwaliteit borstelloze motor zonder compromissen.

Specs.
Turns: 20T
Voltage: 2 ~ 3S LiPoly
RPM / V: 1020 kv
Inwendige weerstand: 0,11 Ohm
Max Laden: 18A
Max Power: 168W
Shaft Dia: 3.0mm
Bolt holes: 16mm en 19mm
Bolt thread: M3
Gewicht: 58g
Motor Plug: 3,5 mm Bullet Connector

Product
Specifications

Aanvullende Informatie

  • Sku:
    SK3-2830-1020
  • Brand:
    Nee
  • Gewicht ( g)
    129.00
  • Lengte
    110.00
  • Breedte:
    45.00
  • Hoogte:
    80.00
  • Kv ( tpm / v )
    1020.00
  • Max Currents (A )
    18.00
  • Vermogen ( W):
    168.00
  • Lengte B ( mm ):
    32.00
  • Kan Lengte D ( mm )
    16.00
  • Max Voltage ( V )
    11.00
  • Shaft A ( mm ):
    3.00
  • Unit Weight (g):
    58
  • C Diameter ( mm )
    28.00
  • Totale lengte E ( mm )
    44.00
  • Resistance ( mh ):
    110.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Winding insulation, very bad. I use 40Amp ESC , and after two crashes, I lost two motors, because of blocking propelers. Smell bad !
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These are an excellent smooth motor. I am using them on my quad in combination with simonk flashed Blueseries.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
rn gzel bir ambalajla aksesuarlar ile beraber geliyor. Multicopter iin almtm ve eer sk450 quadcopter frame alacaksanz, frame'i modifiye etmeniz gerekiyor. Aksi halde motor mili montaja izin vermiyor. Ben beenerek kullandm. Bir krmdan sonra motor millerinde hafif bir yamulma olduunu hissettim ve o haliyle ok ucuza sattm. Tabi satarken krmdan bahsettim.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ordered one for an electrifly nieuport 11, very satisfied by the engine. well engineered, complete accessories, and a nice packing (i know we don't fly the box, but that's a pleasure to open it). Connected to a plush 20 , a 1650 3s , and 10x5 APC style
Regarding my appliance, a bipe weighting about 700 g, the engine is overpowering, i take off half throttle, fly on a third or a fourth.
I see this motor really matching the specs, no doubt i will buy another one for my next dare sopwith tripe. Shall i say i recommend it ?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I place that motor in my Pitts and now flyies very fast with prop 10x5. Very strong motor for the size
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
seems like a good motor, just dont expect to use the bottom housing mounts, the screws are so thin a baby would strip them. also the wires come out of the housing in different holes in relation to the mounting plate between motors.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I buy it to replace the extra 260 motor. amazing quality for the price.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I always re-wind Turnigy motors when I buy them, but I cannot figure out how to disassemble this one. I removed the circlip on the back, but the shaft remains firmly within the bearing tube. Is there a hidden circlip, or is the shaft glued to the bearings?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice motor. It is a comparable motor to the Turnigy 2213/20. 61g with 3,5mm gold connectors and the prop holder (fixed with 3 screws). The 3 screws are not the best quality, so don't screw them too strong, or the winding will break. I have measured this motor (and the Turnigy 2213/20) with my Eagletree gear and uploaded the data to drivecalc. You can use this program to try different props. and find the right configuration. (Turnigy SK3 2830-1020 - timing med) perfect motor for quadcopters: measured for example following combination: Turnigy Platinum 40A ESC;
APC SF 10x3,8 Prop.; Voltage: 11,24V; Current: 18,76A; RPM: 7912; thrust: around 1100g
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Overall nice little motors, let down by poor quality control... I bought 6 for my Y6 multicopter, but 2 have very rough bearings and one of those two had poorly tapped holes on the top of the bell for mounting the alternative prop adaptor - I had to use sleeve lock and some epoxy on the adaptor to hold it firmly in place.

verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Drawing download now [88.64Kb]

Combine

essential items and
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.