Leverancier worden Blog Nieuwe items

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Turnigy Aerodrive SK3 - 3530-1340kv borstelloze Outrunner Motor

Generating Links

Turnigy Aerodrive SK3 - 3530-1340kv borstelloze Outrunner Motor


Now save bespaar € 0,00 € 0,00

€ 30,52
Verzonden vanaf:
  • USA
  • Global
Al gekocht
Geschatte aankomsttijd: Geen Geschatte Aankomsttijd [ ? ]
Uit voorraad!
Geen verzendkosten? Klik hier meer leren!

Turnigy SK3 Motoren zijn de volgende sprong voorwaarts in motor kwaliteit en design. We gaf de ingenieurs om de beste kwaliteit magneten, lagers en materialen beschikbaar zijn voor hen de bron en het ontwikkelen van een motor die zou niet alleen rivaal, maar overtreffen de kwaliteit van vele toonaangevende motor produceert op de markt vandaag.

Het resultaat is een efficiënte, hoog kaliber motor met behulp van kwaliteit dubbel afgeschermde lagers, gesinterde Neodymium magneten en een string gewonden stator zorgen voor een nauwkeurige en consistente kronkelende elke keer.

De Turnigy SK3 motoren zijn geschikt voor modelbouwers die op zoek zijn naar een hoge kwaliteit borstelloze motor zonder compromissen.

Turns: 24T
Voltage: 2 ~ 3S LiPoly
RPM / V: 1340 kv
Inwendige weerstand: 0,052 Ohm
Max Laden: 28A
Max Power: 375W
Shaft Dia: 4.0mm
Bolt gaten: 25mm
Bolt thread: M3
Gewicht: 76g
Motor Plug: 3,5 mm Bullet Connector

  • Kv ( tpm / v ) 1340.00
  • Max Currents (A ) 28.00
  • Resistance ( mh ) 52.00
  • Max Voltage ( V ) 11.00
  • Vermogen ( W) 375.00
  • Shaft A ( mm ) 4.00
  • Lengte B ( mm ) 32.00
  • Can Diameter C ( mm ) 35.00
  • Kan Lengte D ( mm ) 30.00
  • Totale lengte E ( mm ) 52.00

Dimension Diagram Guide

  • attributeset-10


Upload video

Registreer u om video's te uploaden aanmelden of registreren

Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:

Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:

Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

none | Geverifieerde koper

  • Overall
  • Quality
  • Value

Excellent replacement motor

Jun 17, 2022

motor that came with train star assent was pure junk. locked up after a few minutes. The SK3 replaced it after spacers installed.

Alain | Geverifieerde koper

  • Overall
  • Quality
  • Value


Nov 12, 2021

Bon produit à un prix abordable

Rudog | Geverifieerde koper

  • Overall
  • Quality
  • Value

Motor can be excellent.....

Dec 16, 2019

....replacement for some of the Avios and Durafly r/c aircraft models

David | Geverifieerde koper

  • Overall
  • Quality
  • Value

Amazing motor!

Mar 10, 2017

I use this for my Flight Test foam board airplanes the require the C power pack and it turns my planes into rocket ships! I use a 9x6 prop with a Plush 40 amp esc and a 3S 2200 40 c battery. That is the magical combination and is fantastic!!!

michael | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Aug 23, 2016

So disappointed: The SK3 3530 out of the box looks like quality construction but I needed to reverse the position of the shaft. Done it before should be no problem right? This motor does not come with an allan wrench like the Eflite motors do, after selecting the proper wrench size and getting a good tight fit, the set screws stripped out because they were too soft, that's it, the motor is now useless 5minutes out of the box, maybe stick with Eflite if you anticipate needing to reverse the shaft position.

Matthew | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

May 16, 2015

"A leap forward in quality" WHAT A JOKE. I bought 4 of the motors, initially one was faulty (Bad bearing). Hobby king replaced it. Now, another has failed. I'm staying away from cheap crap with projects I care about. I would advise you to do the same.

Gabe | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Nov 03, 2014

I use this motor for ssc combat. 4 cell 2650 mah 40 c batt. 8x3 ma combat prop. 60 amp plush esc. This combo flys circles around glow powered ssc combat planes. Give it a try you won't regret it.

Gyula | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jul 22, 2014

Few measurements of static thurst:
GWS sw 9x4.7, 441w,1200g; (Best power, 1500 mAh 3s 20 c is on limit!!!)
Graupner e 8x4, 300w, 840g; (Best efficiency)
APC e 8x6, 420w, 780g; (lost efficiency not a good choice)
GWS sw 8x4.7, 420 w, 1010g; (More power if you need, but lost efficiency!)
Excellent for 500-600 g 3d, with avarage half throtle 10-12 min on 1500 mAh (with the help of wind :-)), 3s with graupner prop , or best power with GWS sw 9x4.7 if you have enough accu power with low weight.

CReal | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

May 30, 2013

I just wrote a review yesterday but I have to write this, with the smallest carbon fiber folding prop that can be purchased here that is the 9,5x5 size this motor draws 32amps static on the ground at 12500rpm, and in the air 28amps 13500rpm 10,2v... What the hell read the description, what is written there is what you get. Amazing motor!

CReal | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

May 29, 2013

Had my first flight with this motor with a phoenix 2000 glider. The plane comes with a folding 10x6 prop, too much for this but here is some data, will get smaller prop.
tgy super brain 40a data with 2.2 25-50c nano:
no load current 3.3a 20k rpm
10.6v 49a 10800rpm on the ground static
10.5v 43a 11700rpm in the air.(about 100-110km/h)
note that on 80pcnt throttle amp draw is 25-26a at 10600rpm, so with a smaller prop it spins like there is no tomorrow for sure.

Will get smaller prop but its a really great motor, will buy sk3 or ntm in the future.

  1. 1
  2. 2
  3. 3
another view from mike rimfir.10 vs sk3 Download [1367]
rimfire.10 vs sk3 3530 1340 from mike Download [1428]
SK3-3530(DT3007-14P) MOTOR (edited).pdf Download [131]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!