Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global
  • USA

Turnigy Aerodrive SK3 - 3548-840kv borstelloze Outrunner Motor

Turnigy Aerodrive SK3 - 3548-840kv borstelloze Outrunner Motor

QTY:

Now save bewaar € 0,00 € 0,00

€ 31,65
Stock:
Gewicht:
288 g
SKU:
SK3-3548-840

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Product
Omschrijving

Turnigy SK3 Motoren zijn de volgende sprong voorwaarts in motor kwaliteit en design. We gaf de ingenieurs om de beste kwaliteit magneten, lagers en materialen beschikbaar zijn voor hen de bron en het ontwikkelen van een motor die zou niet alleen rivaal, maar overtreffen de kwaliteit van vele toonaangevende motor produceert op de markt vandaag. Het resultaat is een efficiënte, hoog kaliber motor met behulp van kwaliteit dubbel afgeschermde lagers, gesinterde Neodymium magneten en een string gewonden stator zorgen voor een nauwkeurige en consistente kronkelende elke keer. De Turnigy SK3 motoren zijn geschikt voor modelbouwers die op zoek zijn naar een hoge kwaliteit borstelloze motor zonder compromissen.

Specs.
Turns: 10T
Voltage: 3 ~ 4S LiPoly
RPM / V: 840kv
Interne weerstand: 0.025Ohm
Max Laden: 50A
Max Power: 750W
Shaft Dia: 5.0mm
Bolt gaten: 25mm
Bolt thread: M3
Gewicht: 174g
Motor Connectors: 3,5 mm Bullet Connector

Product
Specifications

Aanvullende Informatie

  • Sku:
    SK3-3548-840
  • Brand:
    Turnigy
  • Gewicht ( g)
    288.00
  • Lengte
    110.00
  • Breedte:
    45.00
  • Hoogte:
    80.00
  • Kv ( tpm / v )
    840.00
  • Max Currents (A )
    50.00
  • Vermogen ( W):
    750.00
  • Lengte B ( mm ):
    49.00
  • Kan Lengte D ( mm )
    28.00
  • Max Voltage ( V )
    15.00
  • Shaft A ( mm ):
    5.00
  • Unit Weight (g):
    174
  • C Diameter ( mm )
    37.00
  • Totale lengte E ( mm )
    70.00
  • Resistance ( mh ):
    25.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
super monter puissant et pas trop gourmand en ?nergie monter sur une aile fx 61 avec h?lice repliable 11x8 pour de long vole FPV
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Fliege diesen Motor in meiner MX2 Green 3D 1400mm mit 12X6 APC Style

Das Flugzeug steigt senkrecht, ich bin sehr zufrieden mit dem Motor
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent motor! Used this in my 48" Extra 330sc and it performs very well. Tested using 12x6, 13x6.5 and 14x7 wooden props and they all give strong thrust & power to perform 3D acrobatics, though 14x7 gives strongest power.

Also the motor is surprisingly quiet and doesn't make alot of noise which is very nice.

Overall a great motor, highly recommended.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mounted on a plane HobbyKing MXS EPP / Light 3D Plywood 14x7E prop, the ESC must be 70 amps; flying at a height of 2,300 meters above sea level using a battery of 2,200ma 4s 40c.It provides six minutes of flight combined 3D and pattern.
Incredible engine power and barely heats, coprare more! Youtub: PT_kTyeoHNU

Montado en un avion HobbyKing MXS EPP/Light Plywood 3D con helice 14x7E, el ESC debe de ser de 70 ampers; volando a una altura de 2,300 metros sobre el nivel del mar y usando una bateria de 4s 2,200ma de 40c. proporciona 6 minutos de vuelo combinado de 3D y patron.
Increible potencia y el motor apenas se calienta, coprare ms! Youtub: PT_kTyeoHNU
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
4 flights so far on my PA XR52. Using a Vox 13x5 prop with a 4S battery the power is great. The previous hyperi*n motor couldnt handle all the knife edge spins and was getting a bit rough, so will need to see how this one holds up. Nice and smooth motor, and seems pretty solid so hopefully it is up to some hard 3D flying!.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
One of the front bearings has gone from slightly rumbly when purchased, to rather noisy after only 2 flights. Other than that, its been a good motor so far with great power and a nice finish. Good value for money but the bearing issue stops it being a 5 crown product for me.

Bell was nicely balanced, the prop adaptor is well centered and everything fits great.
Drawing 40A peak with a 12x7 master airscrew prop on 4s.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mounted with a 12x6 folding prop an 4s configuration is great power for a go discover or a similar class airplane. Ps: I mounted in a Go discover, but I had to modify the inner space of the plane.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have more SK-series motors in unse and they work very good. No issues so far. Recommended product.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Always bench test electric rc motors, without a prop, first thing I noticed, the rear of the motor warms up, fast, it does accel and decel smooth. Installing it Running a 4 cell, 2600 lipo, 50 amp ESC, 11 x 6 Masterscrew prop. stats are 47 - 48 amp, 565 watts full throttle, pulling 4.7 - 5.1 pounds. Should be good for my 3.5 pound foamy sbach, seeing how I am not a 3D guy ( yet ), just like to do the rolls, inverts, crazy 180's.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ich habe diesen Motor mit einem 70A Brick in einem Talon verbaut. 12" Prop mit 2x4s 5000mAh.
Funktioniert einwandfrei. Werde aber noch zustzlich ffnungen fr Frischluft schaffen, damit der Regler besser gekhlt wird. Top Motor!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.