New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Turnigy Aerodrive SK3 - 4240-530kv borstelloze Outrunner Motor

Turnigy Aerodrive SK3 - 4240-530kv borstelloze Outrunner Motor

Shipped From:
  • USA
  • Global
QTY:

Now save bewaar € 0,00 € 0,00

€ 31,18
status:
In voorraad
Gewicht:
338 g
SKU:
SK3-4240-530
WANT FREE SHIPPING? Click here to find out more!

Turnigy SK3 Motoren zijn de volgende sprong voorwaarts in motor kwaliteit en design. We gaf de ingenieurs om de beste kwaliteit magneten, lagers en materialen beschikbaar zijn voor hen de bron en het ontwikkelen van een motor die zou niet alleen rivaal, maar overtreffen de kwaliteit van vele toonaangevende motor produceert op de markt vandaag.

Het resultaat is een efficiënte, hoog kaliber motor met behulp van kwaliteit dubbel afgeschermde lagers, gesinterde Neodymium magneten en een string gewonden stator zorgen voor een nauwkeurige en consistente kronkelende elke keer.

De Turnigy SK3 motoren zijn geschikt voor modelbouwers die op zoek zijn naar een hoge kwaliteit borstelloze motor zonder compromissen.

Specs.
Turns: 14T
Voltage: 4 ~ 5S LiPoly
RPM / V: 530kv
Inwendige weerstand: 0,023 Ohm
Max Laden: 46A
Max Power: 795W
Shaft Dia: 5.0mm
Bolt gaten: 25mm
Bolt thread: M3
Gewicht: 194g
Motor Plug: 3,5 mm Bullet Connector

  • Sku SK3-4240-530
  • Brand SK3
  • Gewicht ( g) 338.00
  • Lengte 135.00
  • Breedte 60.00
  • Hoogte 90.00
  • Kv ( tpm / v ) 530.00
  • Max Currents (A ) 46.00
  • Resistance ( mh ) 23.00
  • Max Voltage ( V ) 19.00
  • Vermogen ( W) 795.00
  • Shaft A ( mm ) 5.00
  • Lengte B ( mm ) 50.00
  • C Diameter ( mm ) 42.00
  • Kan Lengte D ( mm ) 23.00
  • Totale lengte E ( mm ) 70.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Just received the motor, very disappointed in the quality of the supplied hardware. Why are these motors not supplied with socket head bolts for both mounting the prop adapter and motor mounts, further the prop adapter is too light for a motor of this rated power driving a 14X7 prop on a 5S system. further the bullet connectors are too small to fit my 3.5mm connectors on the ESC. A lot of fiddling about to get it right, I will report once the motor is in service. My recent purchase of a SK3 motor was also disappointing in the same area, though it performs brilliantly in the air.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just received the motor, very disappointed in the quality of the supplied hardware. Why are these motors not supplied with socket head bolts for both mounting the prop adapter and motor mounts, further the prop adapter is too light for a motor of this rated power driving a 14X7 prop on a 5S system. further the bullet connectors are too small to fit my 3.5mm connectors on the ESC. A lot of fiddling about to get it right, I will report once the motor is in service. My recent purchase of a SK3 motor was also disappointing in the same area, though it performs brilliantly in the air.

Nice one. But too bad there is no manual and advices for setting the timing and switching Frequency.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice one. But too bad there is no manual and advices for setting the timing and switching Frequency.

Motor ist hochwertig verarbeitet und leistungsstark. An Zippy 5s und Aeronaut CC PP 14x8 Stomaufnahme im Stand 43A. Leider passt der Propadapter nicht zum Motor, da nur M6 und 24mm lang, also viel zu kurz. Es ist der gleiche Propadapter wie bei den 35xx Motoren. Schade !!! Wnschenswert bei dieser Motorengre wre ein Adapter mit mindestens 35mm Lnge und M8 Gewinde.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Motor ist hochwertig verarbeitet und leistungsstark. An Zippy 5s und Aeronaut CC PP 14x8 Stomaufnahme im Stand 43A. Leider passt der Propadapter nicht zum Motor, da nur M6 und 24mm lang, also viel zu kurz. Es ist der gleiche Propadapter wie bei den 35xx Motoren. Schade !!! Wnschenswert bei dieser Motorengre wre ein Adapter mit mindestens 35mm Lnge und M8 Gewinde.

So far so good, after I set the timing to 15deg I am getting 45amps and about 950w on 5 cells with 15x8. Will test fly soon

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

So far so good, after I set the timing to 15deg I am getting 45amps and about 950w on 5 cells with 15x8. Will test fly soon

Customer files
SK3-4240(DT3520-14P) MOTOR (edited).pdf Download [122]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save